Kyocera FS-2020, FS-6970, FS-3920, FS-4020 Service Bulletin 2F8-036
Service Bulletin
SB Number:
Subject:
SB 2F8-036
Added cable tie for the latest type of the motor wire (FD assy)
Creation Date: 29/11/2011
FS-2000D/3900DN/4000DN/6950DN/2020D/3920DN/4020DN/
Model:
6970DN
Contents
1. The new motor wire of the latest type of the FD assy Sp, is 40mm longer than the old type of the motor wire.
This is to make the motor wire common with other models. To tie the latest type of the motor wire to the nearby
wires, the cable tie has been bundled with the latest type of the FD assy SP. Please remove the unused part of
the cable tie, after tying the motor wire to the nearby wires.
2. Due to the above mentioned change, a leaet has been bundled with the latest type of the FD assy SP.
Tie the motor wire
with the cable tie
New FD assy
motor wire
Parts
No. Old Parts
No.
1 302F794025
2F794025
2 302F894014
2F894014
3 302F994025
2F994025
4 302J094020
2J094020
New Parts
No.
302F794026
2F794026
302F894015
2F894015
302F994026
2F994026
302J094021
2J094021
Nearby wires
Connect board R
Tie the motor wire
with the cable tie
Description Q’TY Interchange-
FD ASSY SP 1 1 O O FS-6950DN
FD ASSY SP 1 1 O O FS-2000D
FD ASSY SP 1 1 O O FS-3900DN
FD ASSY SP 1 1 O O FS-2020D
Nearby wires
New FD assy
motor wire
Connect board R
ability
Old New Old New
Applicable
model(s)
KMIS Service Department, Kyocera Mita Europe B272 / SB 2F8-036
Page 1 of 2
Service Bulletin
5 302J194010
2J194010
6 302J594072
2J594072
7 302F944130
2F944130
8 ---------- 7YZM420003
Current FD assy (Latest part in the Parts table above)
A4 printer Cable tie bundled Cable tie applied
A3 printer
(FS-6950DN/
6970DN)
302J194011
2J194011
302J594073
2J594073
302F944131
2F944131
++H01
YZ052580
FD assy Machine production
Cable tie bundled Cable tie applied
FD ASSY SP 1 1 O O FS-3920DN/
FD ASSY SP 1 1 O O FS-6970DN
+MOTOR EJECT 1 1 O O FS- 2000D/
+ACCESS BAND - 1 - O
4020DN
3900DN/4000DN/
6950DN/2020D/
3920DN/4020DN/
6970DN
Plan from now on
FD assy Machine production
Added leaet
(Cable tie remains)
Cable tie has been
applied to the wire
No change
Cable tie has been
relocated (The same as
the FD assy)
*1. The leaet shows where to applie the cable tie
The FD assy is shipped, with the wire wrapped
by the cable tie. When installing this part, it is no
longer necessary to tie the motor wire to the
nearby wires.
KMIS Service Department, Kyocera Mita Europe B272 / SB 2F8-036
Page 2 of 2
Loading...