Kyocera FS-2020, FS-3920, FS-4020 Service Bulletin 2J0 0030 B442

Q’

Com

bi

p

ati-

SHEET GUIDE

disused

Service Bulletin Ref. No.

Subject

(Page.1/1)

2J0-0030 (B442)

<Date> December 17, 2011

Measures against the A5 Size Paper Crease When the MP Tray
is in Use

Model

FS-2020D, FS-3920DN, FS-4020DN

Topic

Paper crease might appear when A5 size paper of a certain brand was fed from the MP tray.
The GUIDE TURN position was modified in order to keep the paper feed balance when feeding from the MP tray.
Due to this change, the shape of the COVER MPF was changed since the COVER MPF (No.1) might interfere with
the cassette.

*Please perform the following procedures and replace the COVER MPF (No.1) to handle the machines in the field.

<Handling of A5 size paper crease>

1. Remove the TOP COVER.

2. Remove the LEFT COVER.

3. Remove the cassette.

4. Remove the MP tray and then replace the COVER MPF (No.1).

5. Remove the SHEET GUIDE (disused).

6. Loosen the screw (x2) for the GUIDE TURN.

7. Push down the center of the GUIDE TURN and tighten the screw (x2).

8. Assemble in the reverse order of disassembly.

Press down GUIDE
TURN and fix it.

GUIDE TURN

2 screws

302J008010

1

Old Part

No.

2J008010

No.

KMC’s Classification Entire Stock Rework In-Field modification at next visit

Field Measure:

Please align sheets to the paper guide when feeding from the MP tray. This can prevent skew feeding and

paper crease.

Serial Nos. of the Affected Machines: After using up the old stock

New Part

No.

302J008011

2J008011

Description

COVER MPF 1 1

In-Field modification by case No modification necessary

KYOCERA MITA Europe B.V.

European Service & Development Center (ESDC)

ty

Old New Old New

O O

COVER MPF (No.1)

lity

Remarks