Kyocera FS-2020, FS-3920, FS-4020 Service Bulletin 2J0 005

Service Bulletin

SB Number:

Subject:

SB 2J0-005

Firmware upgrade

Creation Date: 26/02/2010

Model: FS-2020D/3920DN/4020DN

Content of changes

Item Contents

1 Direct printing Direct printing of XPS data has been added.

2 Print pattern The default resolution for direct printing has been added for TIFF and JPEG les.

3 Pop up function The print menu will automatically appear on the operation panel, when an USB drive is

inserted in the USB host.

4 XPS printing from

E-mail

6 MP tray Phenomenon

The machine can print out XPS data received through E-mail from Kyocera MFP models.

When the default cassette is set to MP tray the following may occur:

1. The indication of paper empty for the MP tray is switched OFF.

2. The “Add paper warning” is indicated, when the standard paper cassette and
multi purpose tray are empty.

Solution

Please use one of the following methods:

1. Operation panel:
Device Common Error Handling Set the MP Tray Empty setting to “OFF”

2. Command center:
Basic Device Defaults Set the MP Tray Empty setting to “OFF”

3. Prescribe command:
!R!MPTE 0;EXIT;(MPTE 1;On)

7 Several e-MPS

functions have been
added.

Added e-MPS functions

Items Details Necessary machine modication

1 Custom Box

Quick Copy
Print Job stay

2 Proof print

Private Print

The following e-MPS functions have been added:

Custom Box, Quick Copy, Print Job Stay, Proof print and Private print.
Please see the table below for further details.

It is possible to select

specied le or all print.

It is possible to select

specied le or all print.

Install a hard disk in the machine.

Allocate a part of the machines internal memory as a Ram disk or
install a hard disk in the machine.

Firmware

Type Program No. Check SUM Version Status Date

SYSTEM 2J0_3000.005.017 69b0 005.017 29/07/2009

KMIS Service Department, Kyocera Mita Europe 8988 / SB 2J0-005

Page 1 of 2

Service Bulletin

Classication

Field measure To implement the above mentioned changes, please upgrade the rmware to the latest version.

Serial numbers of affected machines

Type Serial number

FS-2020D XEX9827983

FS-3920DN Not available

FS-4020DN XEZ9806805

Machines produced after the above mentioned serial numbers, are affected by the above mentioned changes.

Entire stock rework

Ensure that the engine rmware is version 2J0_1000.002.008 or later.

In-eld modication at next visit

In-eld modication by case

No modication necessary

KMIS Service Department, Kyocera Mita Europe 8988 / SB 2J0-005

Page 2 of 2