Kyocera FS-2020, FS-3920, FS-4020 Service Bulletin 2J0 019
Service Bulletin
SB Number:
Subject:
SB 2J0-019
Paper creasing/skewed feeding from the MP Tray
Creation Date: 10/01/2012
Model: FS-2020D/3920DN/4020DN
Phenomenon Skewed feeding and paper creasing may occur, when feeding certain types of A5 sized paper
from the MP Tray.
Solution The position of the Guide turn has been changed, to balance the paper feeding from the MP
Tray. The Cover MPF may interfere with the Paper cassette. Therefore the shape has been
changed.
Replacing the Cover MPF with the latest type
1. Remove the Top cover.
2. Remove the Left cover.
3. Remove the Paper cassette.
4. Remove the MP Tray.
5. Replace the Cover MPF with the latest type.
6. Remove the Sheet guide (Which has been discontinued).
7. Loosen the 2 Screws for the Guide turn.
8. Push the Center of the Guide turn downwards, and fasten the 2 screws.
9. Re-assemble the Parts by implementing the above above mentioned steps in reverse order.
Press the Guide turn downwards and x it.
Screws
Parts
No. Old Parts
No.
1 302J008010
2J008010
New Parts
No.
302J008011
2J008011
Description Q’TY Interchange-
COVER MPF 1 1 O O
Guide turn
Sheet guide
Cover MPF
ability
Old New Old New
Classication
Field measure To prevent skewed feeding and paper creasing when feeding from the MP Tray, please align the
KMIS Service Department, Kyocera Mita Europe B442 / SB 2J0-019
Entire stock rework
paper against the Paper guide.
In-eld modication at next visit
Page 1 of 1
In-eld modication by case
X
No modication necessary
Loading...