|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MODELS |
D1005-E3BG · D1305-E3BG |
|
||
|
D1105-E3BG · V1505-E3BG |
|
||
|
|
|
|
|
|
|
|
|
|
ENGLISH
FOREWORD
You are now the proud owner of a KUBOTA Engine. This engine is a product of KUBOTA quality engineering and manufacturing. It is made of fi ne materials and under a rigid quality control system. It will give you long, satisfactory service. To obtain the best use of your engine, please read this manual carefully. It will help you become familiar with the operation of the engine and contains many helpful hints about engine maintenance. It is KUBOTA's policy to utilize as quickly as possible every advance in our research. The immediate use of new techniques in the manufacture of products may cause some small parts of this manual to be outdated. KUBOTA distributors and dealers will have the most up-to-date information. Please do not hesitate to consult with them.
3SAFETY FIRST
This symbol, the industry's "Safety Alert Symbol", is used throughout this manual and on labels on the machine itself to warn of the possibility of personal injury. Read these instructions carefully. It is essential that you read the instructions and safety regulations before you attempt to assemble or use this unit.
3DANGER : Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
3WARNING : Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
3CAUTION : Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury.
IMPORTANT : Indicates that equipment or property damage could result if instructions are not followed.
NOTE : Gives helpful information.
ENGLISH
CONTENTS |
|
SAFE OPERATION ............................................................................................. |
1 |
SERVICING OF THE ENGINE .................................................................................. |
1 |
NAMES OF PARTS ................................................................................................... |
2 |
PRE-OPERATION CHECK........................................................................................ |
3 |
BREAK-IN .............................................................................................................. |
3 |
DAILY CHECK ....................................................................................................... |
3 |
OPERATING THE ENGINE....................................................................................... |
4 |
STARTING THE ENGINE(NORMAL) .................................................................... |
4 |
COLD WEATHER STARTING ............................................................................... |
5 |
STOPPING THE ENGINE...................................................................................... |
6 |
CHECKS DURING OPERATION ........................................................................... |
6 |
Radiator Cooling water(Coolant) ......................................................................................... |
6 |
Oil pressure lamp................................................................................................................. |
6 |
Fuel...................................................................................................................................... |
7 |
Color of exhaust................................................................................................................... |
7 |
Immediately stop the engine if; ............................................................................................ |
7 |
REVERSED ENGINE REVOLUTION AND REMEDIES ........................................ |
7 |
How to tell when the engine starts running backwards........................................................ |
7 |
Remedies............................................................................................................................. |
7 |
MAINTENANCE......................................................................................................... |
8 |
SERVICE INTERVALS........................................................................................... |
9 |
PERIODIC SERVICE............................................................................................... |
12 |
FUEL .................................................................................................................... |
12 |
Fuel level check and refueling ........................................................................................... |
12 |
Air bleeding the fuel system............................................................................................... |
13 |
Checking the fuel pipes ..................................................................................................... |
13 |
Cleaning the fuel filter pot .................................................................................................. |
13 |
Fuel filter cartridge replacement ........................................................................................ |
14 |
ENGINE OIL......................................................................................................... |
14 |
Checking oil level and adding engine oil............................................................................ |
14 |
Changing engine oil ........................................................................................................... |
15 |
Replacing the oil filter cartridge ......................................................................................... |
16 |
RADIATOR........................................................................................................... |
16 |
Checking coolant level, adding coolant ............................................................................. |
17 |
Changing coolant............................................................................................................... |
18 |
Remedies for quick decrease of coolant............................................................................ |
18 |
Checking radiator hoses and clamp .................................................................................. |
18 |
Precaution at overheating.................................................................................................. |
18 |
Cleaning radiator core(outside) ......................................................................................... |
18 |
Cleaning the radiator ......................................................................................................... |
18 |
Anti-freeze ......................................................................................................................... |
19 |
Radiator cement ................................................................................................................ |
19 |
AIR CLEANER ..................................................................................................... |
20 |
Dust indicator (optional)..................................................................................................... |
20 |
|
CONTENTS |
BATTERY............................................................................................................. |
20 |
Battery charging................................................................................................................. |
21 |
Direction for long term storage .......................................................................................... |
22 |
ELECTRIC WIRING ............................................................................................. |
22 |
FAN BELT ............................................................................................................ |
22 |
Adjusting Fan Belt Tension................................................................................................ |
22 |
CARRIAGE AND STORAGE ................................................................................... |
23 |
CARRIAGE........................................................................................................... |
23 |
STORAGE............................................................................................................ |
23 |
TROUBLESHOOTING............................................................................................. |
24 |
SPECIFICATIONS ................................................................................................... |
26 |
WIRING DIAGRAMS ............................................................................................... |
30 |
ENGLISH
SAFE OPERATION 1
SAFE OPERATION
Careful operation is your best assurance against an accident. Read and understand this section carefully before operating the engine. All operators, no matter how much experience they may have, should read this and other related manuals before operating the engine or any equipment attached to it. It is the owner's obligation to provide all operators with this information and instruct them on safe operation.
Be sure to observe the following for safe operation.
1. OBSERVE SAFETY INSTRUCTIONS
A Read and understand carefully this "OPERATOR'S MANUAL" and "LABELS ON THE ENGINE" before attempting to start and operate the engine.
A Learn how to operate and work safely. Know your equipment and its limitations. Always keep the engine in good condition.
A Before allowing other people to use your engine, explain how to operate and have them read this manual before operation.
A DO NOT modify the engine. UNAUTHORIZED MODIFICATIONS to the engine may impair the function and/or safety and affect engine life. If the engine does not perform properly, consult your local Kubota Engine Distributor first.
2. WEAR SAFE CLOTHING AND PERSONAL PROTECTIVE EQUIPMENT (PPE)
A DO NOT wear loose, torn or bulky clothing around the machine that may catch on working controls and projections or into fans, pulleys and other moving parts causing personal injury.
A Use additional safety items-PPE, e.g. hard hat, safety protection, safety goggles, gloves, etc., as appropriate or required.
A DO NOT operate the machine or any equipment attached to it while under the influence of alcohol, medication, or other drugs, or while fatigued.
A DO NOT wear radio or music headphones while operating the engine.
ENGLISH
ENGLISH
2SAFE OPERATION
3.CHECK BEFORE STARTING & OPERATING THE ENGINE
A Be sure to inspect the engine before operation. Do not operate the engine if there is something wrong with it. Repair it immediately.
A Ensure all guards and shields are in place before operating the engine. Replace any that are damaged or missing.
A Check to see that you and others are a safe distance from the engine before starting.
A Always keep the engine at least 3 feet (1 meter) away from buildings and other facilities.
A DO NOT allow children or livestock to approach the machine while the engine is running.
A DO NOT start the engine by shorting across starter terminals. The machine may start in gear and move. Do not bypass or defeat any safety devices.
4. KEEP THE ENGINE AND SURROUNDINGS CLEAN
A Be sure to stop the engine before cleaning.
A Keep the engine clean and free of accumulated dirt, grease and trash to avoid a fire. Store flammable fluids in proper containers and cabinets away from sparks and heat.
A Check for and repair leaks immediately.
A DO NOT stop the engine without idling; Allow the engine to cool down, first. Keep the engine idling for about 5 minutes before stopping unless there is a safety problem that requires immediate shut down.
5. SAFE HANDLING OF FUEL AND LUBRICANTS -KEEP AWAY FROM FIRE
A Always stop the engine before refueling and/or lubricating.
A DO NOT smoke or allow flames or sparks in your work area. Fuel is extremely flammable and explosive under certain conditions.
A Refuel at a well ventilated and open place. When fuel and/or lubricants are spilled, refuel after letting the engine cool down.
A DO NOT mix gasoline or alcohol with diesel fuel. The mixture can cause a fire or severe engine damage.
A Do not use unapproved containers e.g. buckets, bottles, jars. Use approved fuel storage containers and dispensers.
6. EXHAUST GASES & FIRE PREVENTION
A Engine exhaust fumes can be very harmful if allowed to accumulate. Be sure to run the engine in a well ventilated location and where there are no people or livestock near the engine.
A The exhaust gas from the muffler is very hot. To prevent a fire, do not expose dry grass, mowed grass, oil or any other combustible materials to exhaust gas. Keep the engine and muffler clean at all times.
A To avoid a fire, be alert for leaks of flammable substances from hoses and lines. Be sure to check for leaks from hoses or pipes, such as fuel and hydraulic fluid by following the maintenance check list.
A To avoid a fire, do not short across power cables and wires. Check to see that all power cables and wirings are in good condition. Keep all electrical connections clean. Bare wire or frayed insulation can cause a dangerous electrical shock and personal injury.
7. ESCAPING FLUID
A Relieve all pressure in the air, the oil and the cooling systems before disconnecting any lines, fittings or related items.
A Be cautious of possible pressure relief when disconnecting any device from a pressurized system that utilizes pressure. DO NOT check for pressure leaks with your hand. High pressure oil or fuel can cause personal injury.
A Escaping fluid under pressure has sufficient force to penetrate skin causing serious personal injury.
A Fluid escaping from pinholes may be invisible. Use a piece of cardboard or wood to search for suspected leaks: do not use hands and body. Use safety goggles or other eye protection when checking for leaks.
A If injured by escaping fluid, see a medical doctor immediately. This fluid can produce gangrene or severe allergic reaction.
SAFE OPERATION 3
ENGLISH
ENGLISH
4SAFE OPERATION
8.CAUTIONS AGAINST BURNS & BATTERY EXPLOSION
A To avoid burns, be cautious of hot components, e.g. muffler, muffler cover, radiator, hoses, engine body, coolants, engine oil, etc. during operation and after the engine has been shut off.
A DO NOT remove the radiator cap while the engine is running or immediately after stopping. Otherwise hot water will spout out from the radiator. Wait until the radiator is completely cool to the touch before removing the cap. Wear safety goggles.
A Be sure to close the coolant drain valve, secure the pressure cap, and fasten the pipe band before operating. If these parts are taken off, or loosened, it will result in serious personal injury.
A The battery presents an explosive hazard. When the battery is being charged, hydrogen and oxygen gases are extremely explosive.
A DO NOT use or charge the battery if its fluid level is below the LOWER mark.
Otherwise, the component parts may deteriorate earlier than expected, which may shorten the service life or cause an explosion. Immediately, add distilled water until the fluid level is between the UPPER and LOWER marks.
A Keep sparks and open flames away from the battery, especially during charging. DO NOT strike a match near the battery.
A DO NOT check the battery charge by placing a metal object across the terminals. Use a voltmeter or hydrometer.
A DO NOT charge a frozen battery. There is a risk of explosion. When frozen, warm the battery up to at least 16
C (61
F).
9. KEEP HANDS AND BODY AWAY FROM ROTATING PARTS
A Be sure to stop the engine before checking or adjusting the belt tension and cooling fan.
A Keep your hands and body away from rotating parts, such as the cooling fan, V-belt, fan drive V-belt, pulley or flywheel. Contact with rotating parts can cause severe personal injury.
A DO NOT run the engine without safety guards. Install safety guards securely before operation.
10. ANTI-FREEZE & DISPOSAL OF FLUIDS
A Anti-freeze contains poison. Wear rubber gloves to avoid personal injury. In case of contact with skin, wash it off immediately.
A DO NOT mix different types of Anti-freeze. The mixture can produce a chemical reaction causing harmful substances. Use approved or genuine KUBOTA Antifreeze.
A Be mindful of the environment and the ecology. Before draining any fluids, determine the correct way to dispose of them. Observe the relevant environmental protection regulations when disposing of oil, fuel, coolant, brake fluid, filters and batteries.
A When draining fluids from the engine, place a suitable container underneath the engine body.
A DO NOT pour waste onto the ground, down a drain, or into any water source. Dispose of waste fluids according to environmental regulations.
SAFE OPERATION 5
ENGLISH
ENGLISH
6SAFE OPERATION
11.CONDUCTING SAFETY CHECKS & MAINTENANCE
A When inspecting the engine or servicing, place the engine on a large flat surface. DO NOT work on anything that is supported ONLY by lift jacks or a hoist. Always use blocks or the correct stands to support the engine before servicing.
A Disconnect the battery from the engine before conducting service. Put a "DO NOT OPERATE!" tag on the key switch to avoid accidental starting.
A To avoid sparks from an accidental short circuit always disconnect the battery's ground cable (-) first and reconnect it last.
A Be sure to stop the engine and remove the key when conducting daily and periodic maintenance, service and cleaning.
A Check or conduct maintenance after the engine, coolant, muffler, or muffler cover have cooled off completely.
A Always use the appropriate tools and fixtures. Verify that they are in good condition before performing any service work. Make sure you understand how to use them before service.
A Use ONLY correct engine barring techniques for manually rotating the engine. DO NOT attempt to rotate the engine by pulling or prying on the cooling fan and V- belt. This practice can cause serious personal injury or premature damage to the cooling fan and belt.
A Replace fuel pipes and lubricant pipes with their hose clamps every 2 years or earlier whether they are damaged or not. They are made of rubber and age gradually.
A When servicing is performed together by two or more persons, take care to perform all work safely.
A Keep a first aid kit and fire extinguisher handy at all times.
SAFE OPERATION 7
12. WARNING AND CAUTION LABELS
Part No.19077-8724-1 or 16667-8724-1 (55mm in diameter) (37mm in diameter)
Part No.TA040-4957-1 Stay clear of engine fan and fan belt
13. CARE OF WARNING AND CAUTION LABELS
1.Keep warning and caution labels clean and free from obstructing material.
2.Clean warning and caution labels with soap and water, dry with a soft cloth.
3.Replace damaged or missing warning and caution labels with new labels from your local KUBOTA dealer.
4.If a component with warning and caution label(s) affixed is replaced with a new part, make sure the new label(s) is (are) attached in the same location(s) as the replaced component.
5.Mount new warning and caution labels by applying to a clean dry surface and pressing any bubbles to the outside edge.
ENGLISH
SERVICING OF THE ENGINE 1
SERVICING OF THE ENGINE
Your dealer is interested in your new engine and has the desire to help you get the most value from it. After reading this manual thoroughly, you will find that you can do some of the regular maintenance yourself.
However, when in need of parts or major service, be sure to see your KUBOTA dealer.
For service, contact the KUBOTA Dealership from which you purchased your engine or your local KUBOTA dealer.
When in need of parts, be prepared to give your dealer the engine serial number.
Locate the serial number now and record them in the space provided.
|
Type |
Serial No. |
|
|
|
|
(1) Engine serial number |
Engine |
|
|
|
|
|
|
|
Date of Purchase |
|
|
|
|
|
|
|
Name of Dealer |
|
|
|
|
|
|
|
(To be filled in by purchaser) |
|
|
|
|
|
|
|
ENGLISH
ENGLISH
2 NAMES OF PARTS
NAMES OF PARTS
(1) |
Intake manifold |
(10) |
Oil filler plug |
(2) |
Speed control lever |
(11) |
Exhaust manifold |
(3) |
Engine stop lever |
(12) |
Alternator |
(4) |
Injection pump |
(13) |
Starter |
(5) |
Fuel feed pump |
(14) |
Oil level gauge |
(6) |
Cooling fan |
(15) |
Oil pressure switch |
(7) |
Fan drive pulley |
(16) |
Flywheel |
(8) |
Oil filter cartridge |
(17) |
Oil drain plug |
(9) |
Water drain cock |
(18) |
Oil pan |
Loading...