KRUPS EA84 Instruction Manual
www.krups.com
0A14818 - 10.2013- Réalisation : Espace graphique
EN HOTLINE : 1-866-668-0325
FR SANS FRAIS : 1-800-418-3325
ES HOTLINE : 01800 1128325
www.krups.com
ESPRESSO AUTOMATIC
SERIE EA84xx
ENFRES
1 2
A
B
C
E
F
D
G
H
I
J
R
K
1
2
L
M
Q
N
O
P
IFU_KR_EA84_EO_COVER_NAFTA_0A14818_SANS DOS_Mise en page 1 25/10/13 11:10 Page1
1
01234
2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
17 18 19 20
23
1 sec.
o
1 2
h
1 2
h
h
21
1 2
h
h
22
FECHA DE COMPRA :
DATE OF PURCHASE :
DATE D'ACHAT :
CANADA
GROU PE SEB
CANADA
345 Passmore Avenue
Toronto, ON
M1V 3N8
MEXICO
GROU PE SEB M EXICO
S.A. de C.V.
Goldsmith 38 Desp.
401 Col. Polanco
Delegacion Miguel
Hildalgo
11 560 Mexico D.F.
MEXICO
U.S.A.
GROU PE SEB USA
2121 Eden Road
Millville, NJ 08332
1-800-418-3325 01800 1128325 800-526-5377
IFU_KR_EA84_EO_COVER_NAFTA_0A14818_SANS DOS_Mise en page 1 25/10/13 11:10 Page2
5
Dear customer,
Congratulations on purchasing your Espresso Automatic Series EA84XX. This appliance
allows you to prepare a wide variety of drinks, including espressos, coffees or ristrettos,
totally automatically. You can also prepare milk drinks such as cappuccinos. It is designed
to allow you to enjoy coffee shop quality coffee at home, whatever the time of day or day
of the week. You will appreciate both the quality of the coffee produced as well as the ease
of use. You can choose the volume, strength and temperature of your drinks.
The Compact Thermoblock System with integrated percolation chamber, 15 bar pump and
coffee granules that are freshly ground just before extraction, allow you to make ristrettos,
espressos and coffees that are hot right from the first cup with maximum flavour and
covered in a chamois coloured cream.
The hot water function also allows you to prepare teas and other drinks in an instant.
Espressos are traditionally served in small porcelain cups that widen at the top, releasing
all of the coffee’s aromas. To obtain an espresso with the perfect temperature and with a
golden rich crema, we recommend heating the cups beforehand.
It will probably take several attempts before you find the coffee beans you prefer. By
changing the mixture and/or roasting process, you will soon achieve the ideal result.
Espressos are more aromatic than a classic filter coffee. Despite its more distinct taste,
which is very evident in the mouth and more persistent, an espresso contains less caffeine
than a filter coffee (approximately 60 to 80 mg per cup compared to 80 to 100 mg per cup);
this is due to shorter percolation time.
The quality of the water used is also a determining factor in terms of the quality of the drink
achieved. Ideally, use water straight from the tap (so that it has not had time to stagnate on
contact with the air); the water should also be free from any chloride odours and it should
be cold.
The ergonomic and comfortable colour touch screen will help you navigate through the
programs. It will guide you through the stages, from preparing your drink to maintenance
operations.
We hope you enjoy using your Krups appliance.
The Krups team
ENGLISH
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page5
6
Here are some recommendations for making the most of your appliance and
producing quality coffees:
• The quality of the water has a huge impact on the quality of the aromas. Limescale and
chlorine can alter the taste of your coffee. We recommend that you use the KRUPS Claris
Aqua Filter System cartridge, or slightly mineralised water to preserve all the aromas of
your coffee.
• To prepare ristretto, espresso and coffee recipes, we recommend that you use pre-heated
(by running under hot water) tulip shaped porcelain cups, which are the correct size for
the size of drink you want. For your cappuccino, latte and hot milk recipes, we recommend
that you use thick glass cups for a delicious result.
• Roasted coffee beans can lose their flavour if they are not protected. We recommend that
you use the quantity of beans required for the next four to five days. The quality of coffee
beans varies and whether you like them or not is a matter of personal taste; however, we
recommend that you use arabica rather than robusta coffee beans. It will probably take
several attempts to find the coffee beans that you prefer.
Finally, we recommend that you do not use oily or caramelised beans, which can damage
the appliance.
• The quality and fineness of the ground beans will affect the aromas and quality of the
creama. The finer the ground beans the creamier the creama. The size of the grind should
be adjusted to the drink desired: fine for ristretto and espresso and coarser for coffee.
• You can use pasteurised or skimmed, semi-skimmed or whole milk, straight from the
fridge (7°C). The use of special milks (microfiltered, unpasteurised, fermented, enriched,
etc.) can produce less satisfactory results, in particular in terms of the quality of the froth
and these are therefore not recommended.
Warranty conditions
This appliance is covered by a two year manufacturer's warranty. Please refer to the
warranty document for details on the warranty terms and conditions in your country.
This product has been designed for domestic use only. Any commercial use, inappropriate
use or failure to comply with the instructions, the manufacturer accepts no responsibility
and the warranty will not apply.
To comply with the warranty conditions, it is essential to perform the descaling and cleaning
cycle. The warranty will not be valid if all the operations or cleaning and descaling
instructions are not followed or if cleaning or descaling products that do not comply with
KRUPS original specifications are used. The warranty does not apply if the Claris Aqua
Filter System cartridge has not been used according to the KRUPS instructions.
Normal wear and tear of the parts (grinding wheel, valves, seals) are exempt from the
warranty as is damage caused by foreign objects in the coffee grinder (for example: wood,
stones, plastic, parts, etc.).
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page6
7
IMPORTANT INFORMATION ON THE PRODUCT AND INSTRUCTIONS 8
Guide to symbols used in the instructions ....................................................................... 8
Safety instructions ........................................................................................................... 8
Use according to the instructions .................................................................................. 10
Products supplied with your appliance .......................................................................... 10
Factory control ............................................................................................................... 10
DESCRIPTION 11
OVERVIEW 12
Presentation of the different symbols ............................................................................. 12
BEFORE FIRST USE 12
Initial settings .................................................................................................................. 12
Installing the filter ............................................................................................................ 13
Preparing the appliance .................................................................................................. 14
PREPARING DRINKS 14
Information on recipes .................................................................................................... 14
Preparing the grinder ...................................................................................................... 14
Preparing coffee drinks................................................................................................... 14
Preparing other drinks..................................................................................................... 15
Hot water......................................................................................................................... 17
OTHER FUNCTIONS: Prog button 17
Settings ........................................................................................................................... 17
Maintenance.................................................................................................................... 18
Info ............................................................................................................................... 18
GENERAL MAINTENANCE 18
Emptying the coffee grounds collector, coffee drawer and the drip tray........................ 18
Circuit rinsing .................................................................................................................. 19
Automatic cleaning programs ........................................................................................ 19
PROBLEMS AND CORRECTIVE MEASURES 20
TECHNICAL DATA 22
TRANSPORT 23
DISPOSAL 23
RECIPES 24
MANUFACTURER’S WARRANTY 25
TABLE OF CONTENTS
ENGLISH
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page7
8
This manual contains all the important information for setting up, using and maintaining your
automatic coffee/espresso appliance.
The manual also includes important safety instructions.
Always read the instructions carefully before using your appliance for the first time and keep
them for future use: any use which does not conform to these instructions will absolve Krups
from any liability.
Guide to symbols used in the instructions
Symbols and associated words used in these instructions.
Danger: warning against risks of serious or fatal injuries. The flash symbol warns against
electrical dangers.
Caution: warning against any malfunctions, damage to or destruction of the appliance.
Important: general or important comment on the functioning of the appliance.
SAFETY INSTRUCTIONS
Important: these instructions are provided to protect you, third parties and the appliance.
Strict compliance is therefore necessary.
Conditions of use
Do not immerse the appliance in water. Do not immerse the power cord or plug in water or any
other liquid. Any contact between the appliance’s conductive parts and humidity or water can
cause fatal injuries due to the presence of electricity! This appliance can only be used in dry
locations
If the room temperature should change from cold to hot, please wait a few hours before starting
the appliance to ensure that it is not damaged due to condensation.
Avoid placing the appliance in direct sunlight, or exposing it to heat, cold, ice or humidity.
Do not place the appliance on a hot surface such as a warming plate or near a naked flame, to
avoid any risk of fire or other damage.
Keep the appliance out of the reach of children.
This appliance is not intended to be used by persons (including children) with reduced physical,
sensory or mental capacities or lack of experience and knowledge, unless they are supervised
or have been given instructions beforehand concerning use of the appliance by a person
responsible for their safety.
Children should not be allowed to play with the appliance.
If one of the products supplied with the appliance is swallowed, inform your doctor and/or
poison control centre immediately.
This appliance is not suitable for making drinks for babies under the age of 2 years.
IMPORTANT INFORMATION ON THE PRODUCT
AND INSTRUCTIONS
!
!
!
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page8
9
Electrical power supply
Danger: Non-compliance with these instructions could cause fatal injuries due to elec-
tric shock!
Check that your power supply voltage corresponds to that shown on the appliance
(alternating current only). Any error in plugging in your appliance may cause irreversible
damage and invalidate the warranty. The appliance should always be plugged into a socket
outlet with an earth ground connection.
Check that the socket outlet can be easily accessed so that the plug can be disconnected
easily in the event of a malfunction or during a thunderstorm for example.
For the safety of your appliance, remove the plug in the event of a thunderstorm. Do not
pull the power lead to remove the plug.
Remove the plug immediately if you notice any problem during operation or if there is a
problem during percolation.
Disconnect the appliance if you are not going to use it over a long period and when cleaning.
Do not use the appliance if the power cord or the appliance itself is damaged. If the power
cord or plug is damaged, the power cord must be replaced by an approved KRUPS service
center.
Do not leave the power cord overhanging a table or work surface. Do not allow your hands
or the power cord to touch hot parts of the appliance.
The power cord must never be close to or in contact with a source of heat or be allowed to
rest on sharp edges.
The use of multiple plugs or extension leads is not recommended. Any error in connection
will invalidate the warranty.
Appliance
With the exception of cleaning and descaling according to the appliance’s instructions, any
intervention on the appliance must be performed by an approved KRUPS service center.
For your own safety, only use approved KRUPS accessories and spare parts since these
are suitable for your appliance.
Disconnect the appliance when you leave the room or house for a long period of time.
Never open the appliance. Caution, risk of death due to electrical current! Any unauthorised
opening of the appliance will negate the warranty. Do not use your appliance if it is not
working properly or if it has been damaged. In this event, it is recommended that you get
the appliance examined by an approved KRUPS service center (refer to the list in the
KRUPS service booklet).
For safety and accreditation reasons, any transformation or modification of the appliance,
performed individually, is forbidden, as only tested appliances are accredited and the
manufacturer will refuse all liability in the event of damage.
For safety reasons, while producing steam for making a cappuccino, heating milk or heating
water, do no put your hands under the steam nozzle or the super cappuccino accessory,
or under the coffee nozzle while making coffee.
The steam nozzle can be very hot, do not touch it during or just after use.
To avoid dirty water overflowing onto your work-top or running the risk of burning yourself,
remember to fit the drip tray and make sure you protect your work-top during the descaling
cycles, particularly if it is made of marble, stone or wood.
Never put ground coffee into the coffee bean hopper.
Do not put water in the coffee beans hopper.
ENGLISH
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page9
10
Use and maintenance
In the event of a malfunction or poor working condition, check the appliance and try to resolve
the problem (see p. 20: Problems and corrective measures) or get the appliance repaired at an
approved KRUPS service centre if the malfunction persists.
Always refer to the instructions for descaling/cleaning the appliance. Disconnect from the mains
before starting any maintenance operation.
SAVE THESE INSTRUCTIONS
Intended use
This Espresso Automatic Series EA84XX coffee/espresso appliance should only be used to
make espressos, coffee, hot water or to froth milk.
This appliance is intended for indoor, domestic household use only. It is not intended to be
used in the following applications and the warranty will not apply for:
- staff kitchen areas in stores, offices and other working environments
- Farm houses,
- by clients in hotel, motels and other residential type environments.
- Bed and breakfast type environments.
The Espresso Automatic Series EA84XX coffee/espresso appliance is not intended for
commercial or professional use. Use for any purpose other than those described in the present
manual does not comply with the instructions and can result in injuries and property damage
as well as the deterioration or destruction of the appliance.
Parts supplied with your appliance
Check the parts supplied with your appliance. If a part is missing, contact the hotline directly
(see p. 12: Initial settings).
Parts provided:
- Espresso Automatic Series EA84XX
- 1 steam nozzle (depending on model)
- 1 super cappuccino accessory (depending on model)
- 2 cleaning tablets
- 1 descaler sachet
- Claris – Aqua Filter System cartridge with screw accessory
- 1 stick to determine water hardness
- Instructions
- List of Krups After Sales Service Centers
- Warranty documents
-
1 power cord
- 1 steam nozzle cleaning kit
Factory control
Your appliance was checked and tested before leaving the manufacturing factory. Despite a
deep cleaning, you may find some coffee residue in the coffee grinder, coffee bean container
and/or drops of coffee in the drip tray. Thank you for your understanding. We also recommend
that you rinse the appliance once or several times before using for the first time or when it has
not been used for several days.
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page10
11
A
Water tank lid
B
Water tank handle
C
Water tank
D
Coffee drawer
E
Coffee grounds collector
F
Handle for height adjustable coffee
outlets
G
Removable grille and removable drip
tray
H
Lid for the coffee bean hopper
I
Cup Tray
J
Steam nozzle or super cappuccino
accessory (depending on model)
K
Water level float
Coffee beans hopper
L
Grinding fineness selector knob
M
Cleaning tablet pipe
N
Metal coffee grinder
Touch screen
O
Touch screen
P
Program button
Q
"On/Off" button
R
Storage box for nozzle or super
cappuccino system
1
2
Further information on:
The drip tray: allows you to collect water or coffee that may be produced from the appliance
during/after preparations. It must always be left in the same place. Coffee drawer: allows
you to collect excess ground coffee.
Important: read these instructions carefully and keep for future use. Please follow the
safety instructions.
Manufacturer
SAS GSM
Rue Saint-Léonard
F-53104 Mayenne
France
DESCRIPTION
!
ACCESSORIES (sold separately)
This product may differ from the photos
XS 3000
Block of 10
cleaning tablets
(2 tablets
supplied)
F 054
Descalingpowder
(1 sachet
supplied)
Steam
nozzle
F 088
Claris Aqua Filter
System
cartridge
(1 cartridge
supplied)
XS9000
KRUPS
Cleaning
fluid for
Cappuccino
system
(not
supplied)
ENGLISH
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page11
12
Presentation of the different symbols
Danger: The appliance should be plugged into a 120V ~/60Hz socket outlet with an earth
ground connection. Otherwise, you could be exposed to fatal injuries due to
electric shock!
Follow the safety instructions (See “safety instructions”).
Initial settings
When using the appliance for the first time you are asked to perform certain settings. Follow
the instructions that appear on the display. The aim of the following paragraphs is to give you
some visual aids.
Turn on the appliance by pressing the On/Off (Q) button. Let the appliance guide you.
These are the first settings requested:
Language
Select a display language by pressing on the arrows until the required language appears.
Press OK to validate.
Country
Select your county of residence by pressing the arrows until the country appears.
Press OK to validate.
If your country is not in the list, press +.
The appliance will also ask you to set the following parameters:
Hotline number for your country of residence
If you do not know the hotline number for the country you entered in the list, you can search
for it on the Internet site indicated on the screen.
Unit of measurement
You can select whether you would like to use oz or ml as your volume unit.
Date and time
To set the time, click on the required time format (24H or AM/PM).
OVERVIEW
BEFORE FIRST USE
Allows you to validate the stage.
Allows you to go back to the previous stage.
Allows you to go back to the main menu.
Warns of an alert message.
Allows you to interrupt the preparation or
action in progress.
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page12
13
Auto on / Auto off
It is possible to set the time at which you would like the appliance to turn on automatically
every day. Select the time at which you would like the appliance to start automatically using
the previously selected time format.
You can also choose the time after which your device will automatically switch off (time
without use).
Water hardness
You must set your appliance based on the water hardness, between 0 and 4.
Information on water hardness:
Before using the appliance for the first time, determine the hardness of your water so that
you can adjust the appliance to this hardness. You should also do this when you are using
your appliance in a location where the water hardness is different or you notice a change in
the water hardness. To determine the water hardness, use the strip supplied with the
appliance or contact your water company.
The table below contains information on the different classes:
Fill a glass with water and immerse the strip. Fig. 1
Read the water hardness after one minute. Fig. 2
Indicate the number of red zones when setting your appliance.
Installing the filter
When turning on for the first time, the appliance will ask you if you want to install the filter.
Press “YES” and follow the instructions on the screen.
Installing the cartridge in the appliance: screw the filter cartridge into the bottom of the
water tank using the accessory supplied with the cartridge. Fig. 3.
Set the month in which the cartridge was installed (position 1 in the image, figure to the left
of the opening) by turning the grey ring on the upper end of the filter. The month in which
the cartridge needs replacing is indicated in position 2 of the image. Fig. 4.
Put a 20.3 oz container under the steam nozzle. Fig. 5.
The appliance should function regardless of whether a filter is installed or not. The water
circuits must be refilled. To do this, follow the instructions on the screen. The appliance will
begin by preheating the circuits, filling the water circuits and will then carry out a test
followed by automatic rinsing.
The screen then displays the main drinks menu.
Degree of
hardness
Class 0
Very soft
Class 1
Soft
Class 2
Moderately
hard
Class 3
Hard
Class 4
Very hard
° dH
< 3° > 4° > 7° > 14° > 21°
° e
< 3,75° > 5° > 8,75° > 17,5° > 26,25°
° f
< 5,4° > 7,2° > 12,6° > 25,2° > 37,8°
Appliance
setting
01
2 34
ENGLISH
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page13
14
Preparing the appliance
Remove and fill the water tank. Fig. 6.
Once filled, put it back on the back of the machine and close the lid. Fig. 7.
Open the lid on the coffee bean hopper and pour in the beans (0.55 lbs maximum). Fig. 8.
Close the lid on the coffee beans hopper. Fig. 9.
Caution: the use of oily, caramelised or aromatic coffee beans is not recommended in this
appliance. Since some of these beans are very big, they can damage the appliance.
Caution: make sure that any foreign objects such as small stones in the coffee beans do not
enter the hopper. Any damage caused by foreign objects entering the coffee bean
hopper is excluded from the warranty.
Information on recipes
Depending on the recipe selected, your Espresso Automatic EA84XX will automatically adjust
the quantity of ground coffee.
Preparing the grinder
You can adjust the strength of your coffee by adjusting the size of the ground coffee. The finer
the grind the stronger and creamier the coffee, however this depends on the type of coffee
used.
Adjust the size of the ground beans by turning the "Coffee grinding setting" knob (L) in the
bean hopper. We recommend to do this during the grinding process and gradually. After three
preparations, you will notice a very distinctive difference in taste.
The grinding setting is useful when you change coffee recipe, coffee beans, or if you would
like a stronger or weaker coffee. It is not recommended that you perform this setting
systematically.
Preparing coffee drinks
This chapter explains how the appliance operates using the example of the Espresso function.
Press the “Espresso” button.
If the appliance detects a lack of water when you request a recipe, it will ask you to fill the tank.
Place the cup(s) under the coffee spouts.
You can adjust the height of the coffee outlet depending on the size of your cup(s). Fig. 10.
Possible settings
The appliance lets you prepare one or two cups.
Selecting the strength: the more beans selected the coarser the preparation. You can change
the strength using the – and + buttons located to the left and right of the symbols. Press the
“OK” button on the touch screen to launch the preparation.
!
!
PREPARING DRINKS
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page14
15
Preparing an espresso
The appliance grinds the beans, tamp the ground coffee and performs percolation.
It is possible to adjust the volume of coffee in preparation using the - and + buttons.
You can stop the preparation at any time by pressing “STOP” button. Caution, pressing
stop causes a resetting phase that can last up to 30 seconds. This is normal.
When a cycle is interrupted, the appliance does not stop immediately, the appliance will
finish its cycle but the preparation will be cancelled.
Caution! : Automatic rinsing of the coffee nozzle
Depending on the type of recipes prepared, the appliance may carry out an automatic
rinsing operation when it is switched off.
The cycle lasts only a few seconds and will stop automatically.
Preparing other drinks:
Important: we recommend that you use very fresh, very cold pasteurised milk, recently
opened. Unpasteurised milk does not produce the best results.
Important: After using the steam functions, the steam nozzle can remain hot; we
recommend that you wait a few moments before touching and cleaning it.
For drinks with frothed milk or hot water, the drip tray has been specially designed to allow
you to fit a large cup under the steam nozzle or the super cappuccino accessory, once the
magnetised box has been removed (R). The cup is ideally positioned to collect the frothed
milk or the hot water produced by the nozzle or the super cappuccino accessory. Furthermore, you can use the box as storage for the super cappuccino accessory.
RECIPES MADE WITH MILK
Recipes made with the steam nozzle (depending on model): check before each preparation
to make sure that it is locked properly by turning it completely to the right. Fig. 11.
The steam froths the milk. As steam production requires high temperatures, the appliance
has an additional preheating phase.
When the screen displays the drink selection menu, press the “steam” button.
The screen indicates that the appliance is preheating and a message appears asking you
to place a container under the steam nozzle. You can start the steam production by pressing
the “OK” button.
MILK FROTH
Pour milk into your milk container. Only fill half way. Immerse the steam nozzle into the milk.
Fig. 12.
Press the steam button and follow the on-screen instructions.
To achieve a good result:
Stage 1: While holding the milk container, immerse the steam nozzle into the milk (about
0.8 inch) and wait for it to start frothing.
Stage 2: Raise the container slightly (about 0.4 inch). Never immerse the steam nozzle
completely.
Stage 3: Lower the container gradually as the foam increases.
Press any button to stop the steam function. Caution, the cycle does not stop immediately.
!
!
!
ENGLISH
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page15
16
When the steam nozzle is hot, handle using the plastic part only. Fig. 13.
To remove any trace of milk from the steam nozzle, place a container under the nozzle and
press "hot water" for a few seconds.
The steam nozzle can be disassembled for thorough cleaning. Fig. 14.
Clean with water and a dishwashing soap using a brush. Rinse and dry. Fig. 15.
Before reassembling the steam nozzle, make sure that the air holes are not clogged with milk
residue. Unclog with the needle provided if necessary. Fig. 16.
SUPER CAPPUCCINO ACCESSORY (available depending on model)
Important: we recommend that you use very fresh, very cold pasteurised milk, recently
opened. Unpasteurised milk does not produce the best results.
The super cappuccino accessory helps the preparation of a cappuccino or latte.
Preparing the appliance:
Connect the milk suction pipe to the super cappuccino accessory, on the unbevelled side. The
inlet must not be twisted.
Fit the accessory on the steam outlet after having removed the steam nozzle
Enter the bevelled end of the suction pipe into a container filled with very fresh, very cold milk.
Fig. 17.
Place a cup under the super cappuccino accessory.
Recipe stage 1:
Select the cappuccino ( ) or caffè latte ( ) position on the super cappuccino accessory.
Press “steam” to start the pre-heating process.
Possible settings
You can change the steaming time using the – and + buttons located to the left and right of the
symbols.
Press the “OK” button on the touch screen to launch the preparation.
Important: press any button to stop the steam function. Caution, the cycle does not stop
immediately.
Recipe stage 2:
Place a cup under the coffee outlet and start a coffee/espresso cycle. Fig. 18. (See chapter:
Preparing drinks using coffee beans).
Rinsing the accessory:
To ensure that the accessory functions properly, rinse with water after each use. Your appliance
will not ask you to do this. Carry out a steam cycle with a container filled with water in order to
clean the inside of the steam nozzle. Fig. 19.
To do this, you can also use the KRUPS XS9000 liquid cleaner which is available as an accessory.
Maintenance and cleaning:
Remove the super cappuccino accessory and clean the parts using dishwasher soap and a brush.
Please look at Fig. 20 to make sure you clean all the parts, including the circled part on the picture.
This process is very important to avoid any clogging issue The hole in the metal part should not
be allowed to become blocked.
!
!
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page16
17
Hot water
Check that the super cappuccino accessory / steam nozzle is properly locked in place on
its support.
When the screen displays the drink selection menu, press “HOT WATER". A message
invites you to place a container under the steam nozzle and choose the volume.
You can start producing hot water by pressing “OK”.
Press any button to stop the steam function. If the steam nozzle is obstructed, unblock
using the needle supplied. Fig.16.
You can access the menu for the appliance’s other functions by pressing the Prog button.
Settings
The “Settings” menu allows you to make the necessary changes for your own optimum
user comfort and preferences. Below are the main settings available.
!
OTHER FUNCTIONS: Prog button
Date
The setting of the date is necessary in particular if using an antilimescale cartridge.
Clock
You can select a 12 or 24 hour display.
Language
You can choose your preferred language from the suggestions.
Country
You can select your country of residence.
Unit of
measurement
You can choose between ml and oz.
Screen brightness
You can adjust the screen contrast to your preference.
Coffee temperature
You can adjust the temperature of your recipes based on three
levels.
Water hardness
You should adjust the water hardness between 0 and 4. See
chapter “Measuring water hardness”.
Auto-on
You can set the automatic pre-heating to a certain time.
Auto-off
You can choose the length of time after which the appliance will
switch off automatically.
ENGLISH
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page17
18
Maintenance
All these options allow you to start the selected programs. You then have to follow the onscreen instructions.
To exit the maintenance menu, press .
Info
The “Info” menu allows you to access a certain amount of information on your use and certain
stages in the life of your appliance. It also provides information on the appliance's maintenance.
Below is the main information available.
Emptying the coffee grounds collector, coffee drawer and the
drip tray
After 12 coffees, the appliance will ask you to empty the coffee grounds collector and to clean
the coffee drawer. Failure to perform these operations correctly can damage your appliance.
Wait at least 8 seconds before refitting the coffee drawer and the coffee grounds collector, and
follow the instructions on the screen.
The drip tray collects the used water and the coffee grounds collector collects the used coffee
grounds.
The coffee drawer allows you to remove any coffee grounds below the percolation chamber.
Rinsing
Allows you to access the rinsing program.
Cleaning
Allows you to access the cleaning program.
Descaling
Allows you to access the descaling program.
This function is not active until the number of recipes made has been
reached.
Filter
Allows you to access the filter programme.
Date of first use
Displays the date of first use.
Drinks prepared
Displays the total number of coffees, hot water and steam cycles
performed by the appliance.
Coffee cleaning
circuit
Indicates that this should be performed after x amount of cycles.
Descaling
Indicates that this should be performed after x amount of cycles.
Filter
Indicates that this should be changed after x days or x liters / ounces
GENERAL MAINTENANCE
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page18
19
If the message “Empty the two trays” is displayed, empty and clean the drip tray.
1. Remove, empty and clean the coffee grounds collector. Fig. 21.
2. Remove the coffee drawer.
Wait for at least 8 seconds, then first put the coffee drawer back in place and then the coffee
grounds collector tray. Fig. 22.
The drip tray is equipped with a float indicating when it requires emptying. Fig. 23.
Circuit rinsing
You can perform a rinsing cycle at any time by pressing Prog then maintenance. Depending
on the types of recipes prepared, the appliance will perform an automatic rinsing when
switching off.
Automatic cleaning programs
Automatic cleaning programs for the coffee circuit
The appliance will tell you when a cleaning program is required. One cleaning will be
required every 360 preparations (approximately).
To perform a cleaning cycle, you will need a container with a capacity of at least 20.3 oz;
this should be placed under the coffee outlets and you will need a KRUPS cleaning tablet.
Follow the instructions on-screen. It is also possible to launch cleaning via the maintenance
menu.
Important: you do not have to perform a cleaning cycle immediately when the appliance
requests this; however, you should do this as soon as possible. If cleaning is
delayed, an alert message will remain on the screen until the operation is
performed.
The automatic cleaning cycle includes two phases: a cleaning and a rinsing cycle; the
program takes about 13 minutes.
Important: if you disconnect your appliance during cleaning or in the event of a power
cut, the cleaning cycle will resume the stage in progress during the incident.
It will not be possible to delay this operation. It is mandatory to rinse the water
circuit. In this case, a new cleaning tablet may be required. Make sure the
entire cleaning cycle is completed to remove any traces of descaling product
that may be hazardous to your health.
Do not place your hands under the coffee outlets during the cycle.
Automatic descaling program for the steam circuit
Caution: if you installed a Claris - Aqua Filter System cartridge in the water tank,
please remove it before starting the descaling cycle.
The appliance will tell you when a descaling cycle is required. The frequency at which this
program needs to be run depends on the quality of the water used and whether the Claris
Aqua Filter System filter is used or not (the more limescale in the water, the more descaling
is required).
Important: you do not have to perform a descaling program immediately when the
appliance requests it; however, you should do this as soon as possible. If
descaling is delayed, an alert message will remain on the screen until the
operation is performed.
!
!
!
!
ENGLISH
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page19
20
Follow the instructions on-screen. It is also possible to start a descaling cycle via the
maintenance menu.
To carry out a descaling cycle, you will need a container that can hold at least 20.3 oz., which
must be placed under the steam nozzle and you will need a packet of KRUPS descaling agent
(one bag).
The automatic descaling cycle is divided in three stages includes three phases: one descaling
cycle and two rinsing cycles. The program lasts approximately 20 min.
Important : if there is a power cutage or you disconnect your appliance, the cycle will resume
at the stage in progress when the incident occurred; this operation cannot be
delayed. Make sure the entire cycle is completed to remove any traces of
descaling product that may be hazardous to your health.
If any of the problems in the table below persist, call KRUPS customer service. See contact
list enclosed.
!
PROBLEMS AND CORRECTIVE MEASURES
MALFUNCTION CORRECTIVE MEASURES
The appliance indicates a
fault, the software is frozen
or your appliance is malfunctioning.
Switch off and unplug the appliance, remove the filter cartridge,
wait for one minute and start the appliance again.
The appliance does not
come on after pressing the
On/Off button.
Check the fuses and wall socket.
Check that the 2 lead connectors are correctly plugged into the
appliance and into the wall socket.
The grinder is making a
strange noise.
Foreign bodies are present in the grinder.
Disconnect the appliance before any intervention.
Check whether you can extract the foreign body using the suc-
tion from your vacuum cleaner.
The steam nozzle is noisy,
The steam nozzle seems
partially or completely
clogged
The steam nozzle does not
produce froth.
Check that the steam nozzle is correctly positioned on its corresponding end piece.
Unclog the holes with the needle supplied with your appliance. If
the problem persists, dismantle the nozzle and the steam end
piece.
When the end piece has been taken off, use hot water to remove
the rest of the residue and make sure that the hole is not obstructed by any milk or calcium residue.
h
h
h
1
2
3
For preparations made with milk:
We recommend using very fresh, very cold pasteurised milk, and
we also recommend using a cold container.
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page20
21
MALFUNCTION CORRECTIVE MEASURES
No steam is coming out of
the steam nozzle.
Empty the tank and temporarily remove the Claris cartridge.
Fill the tank with calcium rich mineral water (>100 mg/l) and per-
form successive steam cycles (5 to 10) into a container until you
obtain a constant flow of steam.
Re-insert the Claris cartridge into the tank.
The super cappuccino accessory does not produce
froth.
The super cappuccino accessory does not suck up
the milk.
Check that the accessory is correctly fitted to the appliance, remove it and then replace it.
Check that the flexible hose is not obstructed or pierced shaped
and that it is correctly connected to the accessory to avoid any
air entering.
Rinse and clean the accessory (refer to the "Super cappuccino
accessory" chapter).
If the problem persists replace the part surrounded in red on Fig.
20 with the replacement part supplied with your appliance.
The appliance is asking you
to empty the drip tray even
though it is not full.
The appliance is programmed to ask for drainage of the drip tray
every 12 coffees, irrespective of any intermediate drainage that
you may carry out.
There is water under the appliance.
Before lifting off the tank, wait for 15 seconds after the coffee has run
through so that the appliance finishes its cycle correctly.
Check that the drip tray is correctly positioned on the appliance, it
must always be in place, even when your appliance is not being used.
Check that the drip tray is not full.
The drip tray must not be removed during a cycle.
When you turn off the appliance, warm water comes
out of the coffee nozzles.
According to the type of recipe prepared, the appliance can carry
out an automatic rinsing operation when it is turned off. This cycle
lasts only a few seconds and stops automatically.
After emptying the coffee
grounds collector and cleaning the coffee drawer, the
warning message is still displayed.
Correctly refit the coffee drawer and the coffee grounds collector,
follow the instructions on the screen.
Wait at least for 8 seconds before refitting them.
The coffee comes out too
slowly.
Turn the grinding setting button to the right for coarser coffee
grounds (this can depend on the type of coffee used).
Perform one or several rinsing cycles. Start a cleaning cycle (see”
Coffee circuit automatic cleaning program" p.19).
Change the Claris Aqua Filter cartridge (see "Filter installation"
p.13).
Water or steam are
abnormally coming out of
the steam nozzle.
At the start or end of the recipe some water drops may fall from
the steam nozzle. This is normal.
After filling the water tank,
the warning message
remains on the screen.
Check that the tank is correctly positioned in the appliance.
Check and unblock the float if necessary. The float at the bottom
of the tank should move freely.
ENGLISH
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:02 Page21
22
Danger: Only a qualified technician is authorised to perform repairs on the power cord and
the electrical network. If this instruction is not followed, you are at risk of death
due to electric shock! Never use an appliance that is visibly damaged!
MALFUNCTION CORRECTIVE MEASURES
The grinding setting button
is difficult to turn.
Only change the grinding setting when in operation.
The espresso or coffee is
not hot enough.
Increase the temperature of the coffee in the Settings menu.
Heat the cup by rinsing with hot water before starting the prepa-
ration.
The coffee is too weak or
not coarse enough.
Do not use oily, caramelised or aromatised coffees.
Check that the bean hopper contains coffee and that it descends
correctly.
Reduce the volume of the preparation, increase the strength of
the preparation.
Turn the grinding setting button to the left for finer coffee
grounds.
Prepare your coffee in two cycles using the two cup function.
No coffee is coming out of
the appliance.
An incident has been detected during the preparation.
The appliance is restarting automatically and is ready for a new
cycle.
There is a power outage
during the cycle.
The appliance restarts automatically when reconnected.
TECHNICAL DATA
Under reserve of technical modifications.
Appliance:
Automatic Espresso
Series EA84xx
Coffee grounds
tank:
0,55 lbs
Electrical power
supply:
120V ~/60Hz
Pump pressure:
15 bars
Energy
consumption:
During operation:
1450 W
First use and
storage:
indoors, in a dry
place (free from
frost).
Dimensions
(H x l x P) :
14.8x10.7x15.9 inches
Water tank:
57.48 oz
Weight EA84xx:
20.94 pound
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:02 Page22
23
Keep the original packaging for transporting the appliance.
Before transporting or transferring the appliance, empty the coffee grounds collector,
the coffee beans hopper, the water tank and the drip trays to avoid water spillage.
Caution: if the appliance should fall out of the packaging during transport, it is advisable
to take it to an Authorized Service Centre to have it checked and thus avoid any
risk of fire or electrical hazard.
The symbol on the appliance or packaging indicates that this product can never be treated
as household waste. It must therefore be sent to a waste collection centre for the recycling
of electrical and electronic equipment. By taking your appliance to a proper collection centre
and disposing of your appliances correctly at the end of its life, you are helping preserve
our natural resources and are preventing harmful consequences for the environment and
public health. For more information on the waste collection points contact an approved
service centre or your dealer.
This appliance contains one or more batteries that, for safety reasons, can only be accessed
by a repair person. To change the batteries, please contact your nearest authorised Krups
Service Centre.
Important: your appliance contains valuable materials which can be recovered or recycled.
DISPOSAL
!
Let’s all help protect the environment !
Your appliance contains many recyclable materials that can be recovered or
recycled.
Leave it at a local civic waste collection point.
TRANSPORT
!
ENGLISH
IFU_KR_EA84_NAFTA_EA84 25/10/13 11:02 Page23
Loading...