Kodak Digital Frame 1 User Manual

See your extended user’s guide – for more information about using your frame,
visit www.kodak.com/go/digitalframesupport.
Remote control
Button Press to
power* turn on/off the picture frame.
back
OK
*
First, turn on the power switch on the frame.
Remove tab to activate the remote.
menu
home return to the home screen.
menu display menu choices.
back return to the previous screen.
stop a slide show, display thumbnails.
OK accept the current selection.
4-way navigate through pictures or menus.
zoom magnify the picture.
rotate rotate the picture, 90° clockwise each press.
select mark pictures for an operation.
slide show play a slide show.
play/pause play/pause a video or slide show.
rewind rewind a video.
fast forward fast forward a video.
stop stop a video, display the first frame.
stop a slide show, display thumbnails.
volume decrease (-) or increase (+) the volume.
mute mute audio.
ENGLISH
www.kodak.com/go/digitalframesupport 1
ENGLISH
Front View
1
2
3
1 LCD screen
2 Faceplate
3 Remote control sensor
Back/Left Side View
1
2
1
2
3
1 Speakers 5 Memory card slot - SD, MS, xD, MMC
2 Wall mount hangers 6 On/Off switch
3 Frame stand 7 Remote control holder (removable)
4 Memory card slot - CF, MD
4
5
6
Slide the holder into slots.
7
2 www.kodak.com/go/easysharecenter
Top/Right Side View
6432
5
8
9
10
11
12
1 Picture/music toggle 8 USB connector (connect to computer, also connect
2 Play/Pause
3 Stop/Back 9 Volume control
4 Menu 10 Headphone jack
5 OK 11 DC-In (12 V)
6 Down 12 Reset button
7 Up
camera/USB device - with adapter cable.)
71
ENGLISH
www.kodak.com/go/digitalframesupport 3
ENGLISH
Setting up your wireless network
See the Wireless Setup Guide
Follow the directions in the
Install the software on your computer.
Set up your frame and wireless network.
View pictures over your wireless network.
CD packaged with your frame.
Wireless Setup Guide
to:
Connecting the power cable
Your power cable (included with the frame) may be different from the one pictured. Use the plug that accommodates your type of power outlet.
4 www.kodak.com/go/easysharecenter
Turning on the frame
ENGLISH
Press the switch
1.
to On.
Then use the remote control
2.
to turn the power off and on.
backOKmenu
Setting your language
backOKmenu
The language setup screen appears the first time you turn on the frame.
1.
2.
to change.
OK to accept.
A slide show starts from sample pictures pre-loaded in internal memory.
www.kodak.com/go/digitalframesupport 5
ENGLISH
Viewing your first pictures
To play a slide show from a memory card or USB device, insert the card or device (see step
To view pictures from your computer over your wireless network, see the
Wireless Setup Guide
on the next page).
6
If a slide show is already playing (for example, from the pre-loaded sample pictures), your slide show starts automatically.
If you are at the Home screen (page 8), press
on the remote control to highlight your picture source, then press to start the slide show.
— To play music with your pictures or slide
shows, see page 12.
and your extended user’s guide.
6 www.kodak.com/go/easysharecenter
Inserting memory card/USB device
Memory card
(sold separately)
CompactFlash/ MicroDrive
Secure Digital/ Memory Stick/ xD/ MultiMediaCard
ENGLISH
(digital camera, flash drive, card reader, etc.—sold separately)
b)
USB cable included with your USB
a)
device.
b)
USB adapter cable included with your EX model picture frame.
a)
www.kodak.com/go/digitalframesupport 7
USB device
1 Doing more
All buttons and controls described are on the remote control unless otherwise specified. For supported picture, video, and music file formats, see the extended user’s guide.
Home screen—picture sources and settings
1 Press .
All connected sources and the Settings icon are displayed.
2 Press to highlight a picture source, then:
Press to start a slide show.
Or, press OK to display thumbnails, folders,
albums.
Home screen options:
My Frame—the frame’s internal memory. Copy your special pictures to internal memory from a memory card or other device (
Memory card—appears when you insert a card (page 7). The label and icon indicate the type of card.
Camera—appears when you connect a digital camera via USB cable (page 7).
USB drive—appears when you insert a USB flash drive (page 7).
page 13).
8 www.kodak.com/go/easysharecenter
Doing more
Network computer—appears if you are connected to a wireless network computer. Display pictures that are stored on the computer. See your
KODAK Gallery—appears if you have set up your Gallery account and are connected to a wireless network. Display your albums and My Friends’ Albums from the Gallery. See your
KODAK Gallery, with new picture notification —someone has shared pictures with you at the Gallery! See page 11.
Settings—customize your frame settings. For example, set slide show durations and transitions, viewing options, clock and timer, etc. For more information, see your extended user’s guide at www.kodak.com/go/digitalframesupport.
Wireless Setup Guide
.
Wireless Setup Guide
.
Viewing pictures and videos
The viewing methods described here apply to pictures and videos from any picture source: internal memory (My Frame), a memory card, camera or other USB device, or wirelessly from your network computer or Gallery account.
Thumbnails view
To view your pictures as thumbnails,
press when a slide show is playing.
To navigate through the thumbnails, press .
To play a video ( ), highlight it and press OK.
To view a different folder, highlight it and press OK.
www.kodak.com/go/digitalframesupport 9
Doing more
Single view
To view a single, full-screen picture, highlight it in thumbnails view and press OK.
To magnify a picture up to 8X, press . To view other parts of the picture, press
. Continue pressing to return to full view.
To rotate a picture, press .
Slide show
To start a slide show from any selected picture (thumbnail or single view), press .
To start a slide show from the Home screen , press to highlight a picture
source, then press .
To change the slide duration or choose a different transition type, go to Home ,
Settings , Viewing Options.
Arrange by date or filename
By default, the pictures on your frame are arranged by date, starting with the oldest. You can change the arrangement, or sort order, of your pictures by date or alphabetically.
To change the sort order, press , then select Sort by OK. Select a sort order, then press OK.
10 www.kodak.com/go/easysharecenter
Doing more
Automatically receive My Friends’ Albums
Your wireless frame automatically notifies you when a friend shares pictures with you at the Gallery. Play a slide show of the new pictures, right on your frame, even before you see the email on your computer!
NOTE: The email icon means you have new pictures that you haven’t viewed yet.
To see the pictures right away: 1 When the notice appears on the frame screen,
press to highlight View.
2 Press OK.
A slide show of the new pictures plays on your frame. If there are multiple albums you haven’t viewed yet,
select a marked album from the list and press OK.
To see the pictures later: 1 When the notice appears on the frame screen,
highlight Dismiss, then press OK.
2 When you want to see the new pictures, press Home
(
), highlight KODAK Gallery ( ), then press OK.
3 With My Friends’ Albums highlighted, press OK.
4 Highlight a marked album , then press OK.
To change your notification settings, see your extended user’s guide.
www.kodak.com/go/digitalframesupport 11
Doing more
Playing music
Play your MP3 files (from any connected device or source) to accompany your pictures, videos, and slide shows.
1 Press to interrupt your picture or slide show and display the Audio screen.
2 Press to locate your music files. Then press OK.
3 Press to select Play All Songs or to go to the next
or previous song. Then press OK.
Your music starts playing.
4 Press to return to your picture or slide show.
Your selected music continues to play as the slide show resumes. Videos play without their related audio (default setting).
5 To turn off music, press , then .
6 Press again to return to your pictures.
NOTE: To copy audio files to internal memory, drag and drop them from your computer via the included USB
cable. See your extended user’s guide.
12 www.kodak.com/go/easysharecenter
Doing more
Deleting pictures
1 Display a picture in single view, then press .
2 Press to highlight Delete, then press OK.
3 Highlight Delete and press OK again to confirm.
(To cancel the deletion, highlight Exit, then press OK.)
The picture/video is deleted.
To delete multiple pictures/videos, see page 14.
NOTE: You can delete pictures/videos from a card, internal memory, or some connected USB devices.
You cannot delete from remote locations over the wireless network.
Copying pictures
Copy pictures/videos from your current viewing location to internal memory or other connected devices. To copy pictures/videos to your computer in connected or wireless mode, see your extended user’s guide.
1 Display a picture in single view, then press .
2 Press to highlight Copy, then press OK.
3 Press to highlight the location you want to copy
to, then press OK.
To copy multiple pictures/videos, see page 14.
www.kodak.com/go/digitalframesupport 13
Doing more
Selecting multiple pictures
Use the multi-select feature to copy or delete two or more pictures/videos; or to play a slide show of selected pictures/videos.
Selecting one at a time
1 In thumbnails view, press to find a picture/ video.
2 Press to select a picture/video. Repeat to select additional pictures/videos.
A check mark appears on the picture. Press again to remove a check mark.
3 Press to view a slide show of the selected pictures. Press menu to copy or delete
them.
Selecting all at once
1 Press whenever pictures/videos are displayed
(slide show, video, single picture).
2 Press to highlight Select All, then press OK.
A check mark appears on all pictures/videos in your current location.
3 To remove the check marks, press , then
Select/Unselect All OK Unselect All OK.
14 www.kodak.com/go/easysharecenter
Doing more
Printing pictures
For printing to a PictBridge enabled printer, see your extended user’s guide.
Learning more about your frame
www.kodak.com/go/digitalframes Frame accessories, including fashion faceplates
www.kodak.com/go/digitalframesupport Extended user’s guide
Interactive troubleshooting and repairs Interactive tutorials FAQs Downloads Product registration
For package contents, see your product package.
www.kodak.com/go/digitalframesupport 15
2 Appendix
Important safety instructions
CAUTION:
Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support.
The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For
approved accessories, visit
Use only a USB-certified computer equipped with a current-limiting motherboard. Contact your computer
manufacturer if you have questions.
When removing the battery from the remote, allow it to cool; it may be hot.
Follow all warnings and instructions supplied by the battery manufacturer.
Use only batteries approved for this product to avoid risk of explosion.
Keep batteries out of the reach of children.
Do not allow batteries to touch metal objects, including coins. Otherwise, a battery may short circuit,
discharge energy, become hot, or leak.
Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or extreme temperature.
Remove the battery when the remote control is stored for an extended period of time. In the unlikely event
that battery fluid leaks inside the product, contact Kodak customer support.
Dispose of batteries according to local and national regulations. Visit www.kodak.com/go/kes.
Do not charge non-rechargeable batteries.
For more information on batteries, visit www.kodak.com/go/batterytypes.
Internal digital picture frame battery (not removable or replaceable)and remote control battery may include
www.kodak.com/go/accessories.
16 www.kodak.com/go/easysharecenter
Appendix
perchlorate material. Special handling may apply in California.
Read and follow all warnings and instructions supplied by the battery manufacturer.
CAUTION:
EX models only: When using this product, it should be installed and operated with a minimum distance of 7.9 in. (20 cm) for 2.4 GHz operations between the radiator and your body. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter.
Upgrading your software and firmware
Download the latest versions of the software and frame firmware (the software that runs on the frame). See
www.kodak.com/go/digitalframedownloads.
Additional care and maintenance
Wipe the frame and the LCD gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not
use cleaning solutions unless designed specifically for LCD screens. Do not allow chemicals, such as suntan lotion, to contact painted surfaces.
Service agreements are available in some countries. Contact a dealer of Kodak products for more
information.
For digital frame disposal or recycling information, contact your local authorities. In the US, visit the
Electronics Industry Alliance Web site at www.eiae.org or visit www.kodak.com/go/digitalframesupport.
Limited warranty
Kodak warrants Kodak consumer electronic products and accessories (“Products”), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.
Limited warranty coverage
Warranty service is only available from within the country where the Products were originally purchased. You may be required to ship Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a
www.kodak.com/go/digitalframesupport 17
Appendix
Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under the warranty. If replacement parts are used in making repairs, those parts may be remanufactured, or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.
Limitations
This warranty does not cover circumstances beyond Kodak's control. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments (such as third party ink or ink tanks), failure to follow Kodak's operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. Kodak makes no other express or implied warranty for this product, and disclaims the implied warranties of merchantability and fitness for a particular purpose. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such longer period as required by law. The option of repair, replacement, or refund is Kodak's only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product regardless of the cause. Liability for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase use or failure of the Product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed.
Your rights
Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
18 www.kodak.com/go/easysharecenter
Appendix
FCC compliance and advisory
Kodak EasyShare digital picture frame
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.
FCC and Industry Canada
This device complies with Industry Canada RSS-210 and FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE
Hereby, Eastman Kodak Company declares that this Kodak product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
This digital picture frame EX811 and EX1011 transmits in 10 dBm. In France, the power level is limited to 10dBm in outdoor environments, per regulations. When in France, use the wireless functions of this device indoors only.
www.kodak.com/go/digitalframesupport 19
Appendix
Canadian DOC statement
DOC Class B Compliance—This Class B digital apparatus complies with Canadian ICES-003. Observation des normes-Classe B—Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Waste Electrical and Electronic Equipment labeling
EU: It is the final user's responsibility to discard this equipment into an approved, segregated collection scheme to enable its suitable treatment/disposal and to improve human/environmental protection. For more information, see your retailer, local authority, or (Product weight: EX811 – 794 g.; EX1011 – 830 g.)
Australian C-Tick
www.kodak.com/go/recycle.
N137
MPEG-4
Use of this product in any manner that complies with the MPEG-4 visual standard is prohibited, except for use by a consumer engaging in personal and non-commercial activities.
Russian GOST-R
Eastman Kodak Company Rochester, New York 14650
Korean Class B ITE
20 www.kodak.com/go/easysharecenter
China RoHS
Appendix
www.kodak.com/go/digitalframesupport 21
Appendix
Eastman Kodak Company
Rochester, New York 14650 © Eastman Kodak Company, 2007 Kodak and EasyShare are trademarks of Eastman Kodak Company. Eastman Kodak Company is an authorized licensee of the CompactFlash trademark.
2F6847_en
22 www.kodak.com/go/easysharecenter
Loading...