Kia K102R Instruction Manual
INSTRUCTION MANUAL
K102R
MP3/USB/AUX/BLUETOOTH/iPod
CD PLAYER WITH
AM/FM RADIO
BEFORE USE
Before operating the unit, please read this
manual thoroughly and retain it for future
reference
1. OPERATING INSTRUCTIONS ---------------------------------- Page 03
2. BLUETOOTH -------------------------------------------------------- Page 04
3. GENERAL ------------------------------------------------------------ Page 21
4. ANTI-THEFT SECURITY CODE -------------------------------- Page 24
5. RADIO ----------------------------------------------------------------- Page 25
6. CD PLAYER ---------------------------------------------------------- Page 26
7. USB PLAYER -------------------------------------------------------- Page 29
8. AUX PLAYER -------------------------------------------------------- Page 30
9. IPOD PLAYER -------------------------------------------------------- Page 31
10. FIRMWARE UPGRADE ------------------------------------------ Page 33
11. HANDLING COMPACT DISCS --------------------------------- Page 34
12. ERROR DISPLAY---------------------------------------------------- Page 35
13. PRODUCT AND WARRANTY SERVICE ------------------- Page 36
14. MP3/WMA INFORMATION ------------------------------------- Page 37
15. WARNINGS AND PRECAUTIONS --------------------------- Page 38
16. SPECIFICATIONS ------------------------------------------------ Page 39
OPERATING INSTRUCTIONS
Note: Numbers inside circles e.g. are used throughout this manual, to refer to each of
the buttons shown on this page.
①
POWER (ON / OFF / Volume)
⑫
PRESET 3 MEMORY
(RPT – Repeat Mode)
②
AUDIO SETTING SELECT / TUNING
⑬
PRESET 4 MEMORY
(RDM – Random Mode)
③
WARNING LED
⑭
PRESET 5 MEMORY
(DIRECTORY DOWN)
④
USB CONNECTOR
⑮
PRESET 6 MEMORY
(DIRECTORY UP)
⑤
AM/FM BAND BUTTON (AM/FM)
⑯
EJECT
⑥
MODE BUTTON (MODE)
⑰
EQUALIZER (EQ)
⑦
AUTOMATICAL DOWN TUNING
TRACK DOWN & REVIEW
⑱
CD SLOT
⑧
AUTOMATICAL UP TUNING
TRACK UP & CUE
⑲
PHONE BOOK BUTTON
⑨
AUX CONNECTOR (AUX)
⑳
OFF-HOOK BUTTON
⑩
PRESET 1 MEMORY
(DISP – Display Mode)
ON-HOOK BUTTON
⑪
PRESET 2 MEMORY
(SCAN – Scan Mode)
MICROPHONE
3
2 22
3 17 9 10
11 12 13 14 15 4 1
6 20
5 18
19 7 8 16 21
22
21
22
BLUETOOTH
- Table of contents
Introduction
■ Using Bluetooth wireless technology - - - - - - - - - - - - - - - - - - - - - - - - - - 05
■ Bluetooth indicators shown on the radio display - - - - - - - - - - - - - - - - - - - 06
► Bluetooth indicator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06
► Battery strength indicator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06
► Signal level indicator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06
1. Bluetooth Function
1.1. Registering a Bluetooth mobile phone or music player - - - - - - - - - - - - 07
1.1.1. Pairing mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 07
1.1.2. Setting your Bluetooth device to pairing mode - - - - - - - - - - - - - - 08
1.2. Disconnecting a Bluetooth device - - - - - - - - - - - - - - - - - - - - - - - - - 08
1.3. Selecting a Bluetooth device - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09
1.4. Deleting a previously paired Bluetooth device - - - - - - - - - - - - - - - - - - 10
1.5. Basic telephone operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
1.5.1. Using the KIA Bluetooth radio for hands-free calls - - - - - - - - 11
1.5.2. Last number redial - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
1.5.3. Switching to private (handset) mode during a call - - - - - - - - - - - - 11
2. Phonebook Function
2.1. Using the phonebook - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
2.2. Transferring entries from a mobile phone to the radio phonebook - - - - 13
2.3. Managing the phonebook - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
2.3.1. Storing the last call phone number - - - - - - - - - - - - - - - - - - - - 15
2.3.2. Editing name and phone number entries - - - - - - - - - - - - - - - - - - 16
2.3.3. Deleting stored phone numbers - - - - - - - - - - - - - - - - - - - - - - - - - 17
3. Audio Player Function
3.1. Playing music using Bluetooth Audio - - - - - - - - - - - - - - - - - - - - - - - - 18
3.2. Connecting a Bluetooth music player and mobile phone simultaneously 19
4. Bluetooth Settings
4.1. Setting the automatic call answer feature - - - - - - - - - - - - - - - - - - - - - - 20
4.2. Setting calling voice volume - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
4.3. Setting the ring volume - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
4
BLUETOOTH
- Introduction
■ Using Bluetooth Wireless Technology
Your KIA car radio supports Bluetooth wireless technology. Bluetooth technology provides a
wireless link between a Bluetooth mobile phone or Bluetooth music player and the KIA
Bluetooth car radio.
The KIA Bluetooth car radio features a hands-free system so that you may talk on the
telephone without taking your eyes off the road or your hands off the wheel. A microphone
built into the front of the radio receives your voice and the calling party can be heard through
the car speakers.
Additionally, a Bluetooth music player can be wirelessly connected to the KIA Bluetooth radio
and playback music tracks in high quality sound through the car speakers. Some Bluetooth
mobile phones include a music player and can provide both hands-free calling and music
playback. Check your mobile phone owners manual for details.
Note:
a. When the car ignition switch is in the ACC position, the KIA Bluetooth radio is on standby to
connect with your mobile phone even if the radio is switched off. The car battery may
therefore become drained if the ignition switch remains in the ACC position for an extended
period of time.
b. Bluetooth technology uses low power radio transmission to connect to your Bluetooth
mobile phone or Bluetooth music player. As radio signal strength reduces over distance,
the quality of sound performance during phone calls and music playback may become poor
if the distance between the radio and device widens. It is recommended that the mobile
phone or music player is kept inside the car cabin for best results.
c. As a Bluetooth wireless connection can extend to 10 meters, your Bluetooth device may
automatically connect to the KIA Bluetooth radio even if the device is not in the car.
d. The KIA Bluetooth radio uses the latest Digital Noise & Echo suppression system to provide
the best sound clarity with little or no distortion, but in some conditions there may be some
echo and noise experienced. It is recommended to keep the car windows closed during
hands-free calls for best results.
e. The KIA Bluetooth radio uses the following Bluetooth profiles:
► GAVDP (Generic Audio/Video Distribution Profile)
► OPP (Object Push Profile)
► HFP (Hands Free Profile)
► HSP (Head Set Profile)
► A2DP (Advanced Audio Distribution Profile)
► AVRCP (Audio Video Remote Control Profile)
5
BLUETOOTH
- Introduction
■ Bluetooth Indicators Shown on the Radio Display
► Bluetooth indicator
The Bluetooth logo above is displayed when a Bluetooth device is connected, and not
displayed, when no Bluetooth device is connected. If the Bluetooth mobile phone is
connected but the connection is not of satisfactory quality, the Bluetooth logo is not
displayed.
► Battery strength indicator
This is an indication of your mobile phone battery condition. If your mobile phone is not
unable to transmit battery condition level, the indicator is not displayed.
► Signal level indicator
This is an indication of the mobile phone network signal strength in your current location.
If your mobile phone is not able to transmit signal level, the indicator is not displayed.
6
BLUETOOTH
– Bluetooth Function
1. Bluetooth Function
1.1. Registering a Bluetooth Mobile Phone or Music Player
1.1.1. Pairing Mode
A Bluetooth connection must first be established between your Bluetooth mobile phone
or Bluetooth music player and the KIA Bluetooth radio. The first step to connecting the
Bluetooth radio and Bluetooth device is to introduce or ‘Pair’ the KIA Bluetooth radio and
Bluetooth device together. It is recommended that you have the instruction manual for
your Bluetooth mobile phone or music player with you during the pairing process
described below to understand how to set your device to pair with the KIA Bluetooth
radio.
Note: It is recommended that all other Bluetooth devices other than mobile phones are
switched off during the registration or pairing process.
Pairing instructions:
1) Press button ⑳ once to select BLUETOOTH mode.
2) Press knob ② to display REG PHONE, the press knob ② again. PAIRING and
CODE 0000 will alternately appear on the radio display. The KIA Bluetooth radio
is now waiting for your Bluetooth device to respond with the correct details.
3) Now, set your Bluetooth device to pair with the KIA Bluetooth radio. For a guide to
setting your Bluetooth device to do this, refer to section 1.1.2. ‘Setting your
Bluetooth device to pairing mode’ on the next page of this booklet.
4) If you wish to cancel the PAIRING mode, press button .
5) If the pairing process is successful, the Bluetooth logo appears on the radio display
and paired phone name (e.g. Samsung or Nokia) and CONNECTED appear on the
display for 2 seconds.
6) Your Bluetooth device is now ready for use with the KIA Bluetooth radio.
Note:
a. The KIA Bluetooth radio allows a maximum of 6 Bluetooth devices to be paired
b. The battery and signal indicators may not be displayed if your mobile phone does
not send this information to the KIA Bluetooth radio.
c. Bluetooth technology only allows one phone to be connected to your KIA Bluetooth
radio at one time.
d. If a Bluetooth music player is to be connected together with a mobile phone, refer
to the notes in section 3.1. ‘Playing music using Bluetooth Audio’ on page 18.
e. Bluetooth Connection with a mobile phone is normally established using the Hands
Free Profile (HFP). However, in some cases, the connection may use Head Set
Profile (HSP) and some functions may not be available.
21
7
BLUETOOTH
– Bluetooth Function
1.1.2. Setting Your Bluetooth Device to Pairing Mode
1) Browse your mobile phone or music player menu to find the SETTINGS or
CONNECTIVITY section to find the Bluetooth connection section.
2) Find the command that may be called Search for Bluetooth device or Discovery
mode so that your Bluetooth device can locate all the Bluetooth devices within range
that may be connected.
3) After the search is complete, KIA should appear on your mobile phone or music player
screen.
4) Select CONNECT or SELECT on your mobile phone or music player.
5) The mobile phone or music player should now prompt you top enter a PIN code.
Enter 0000 into your Bluetooth device and select OK.
6) The mobile phone or music player should confirm that it has established a new paired
connection with the KIA Bluetooth radio.
7)
The pairing process is now complete.
8) If the pairing failed, FAIL appears on the KIA Bluetooth radio display.
Note:
a. As each mobile phone or music player brand and model has a different menu
structure and control names, you may need to refer to the user manual of your
Bluetooth device for the correct procedure to connect to another Bluetooth device.
b.
Once the Bluetooth pairing is complete, automatic connection between mobile phone
and the KIA Bluetooth radio is possible whenever the car ignition switch is switched
on. The mobile phone must be set to automatically connect to the KIA Bluetooth
radio to allow this automatic connection.
c. The KIA Bluetooth radio will give connection priority to the last connected mobile
phone.
d. It is recommended that all other Bluetooth devices other than mobile phones are
switched off during the registration or pairing process.
e. A passcode may not be required on some mobile phones.
1.2. Disconnecting a Bluetooth Device
If you need to disconnect your Bluetooth mobile phone or music player with the KIA
Bluetooth radio, follow the steps below.
1) Press button ⑳, to select BLUETOOTH mode.
2)
BLUETOOTH appears on the display.
3) Press knob ②, REG PHONE appears on the display.
4)
Press knob ② again to disconnect the currently connected mobile phone or music
player from the KIA Bluetooth radio.
5)
When the Bluetooth connection is lost, Bluetooth logo disappears and the previously
connected device name (e.g. Samsung or Nokia) and LOST appear on the display.
6) If BEEP ON is selected (see page 21), three beep sounds are heard when the current
Bluetooth device connection is lost or disconnected.
8
BLUETOOTH
– Bluetooth Function
1.3. Selecting a Bluetooth Device
The KIA Bluetooth radio can pair up to 6 Bluetooth devices. A previously paired mobile
phone or music player can be selected for connection using the method described below.
Refer to the Table 1.1 for examples.
- Table 1.1 -
Preset No. Bluetooth Device Name
1 Samsung (For example)
2 Sony (For example)
3 Nokia (For example)
4 Motorola (For example)
5 EMPTY
6 EMPTY
1) Press button ⑳, to select BLUETOOTH mode.
2)
Press knob ②. REG PHONE will appear on the display.
3) Turn knob ②, until SEL PHONE is displayed.
4)
When SEL PHONE appears on the display, press knob ② and PRESET? appears on
the display.
5) Press the preset button ⑩ ~ ⑮ to display the name of the Bluetooth device name of
the mobile phones or music players previously paired. You may also turn the button
② to display the paired devices. Each time you turn knob ②, the LCD displays as
follows:
1_Samsung Æ 2_Sony Æ 3_Nokia Æ 4_Motorola Æ BACK
6) If the Bluetooth mobile phone name is “Samsung” as in the example of Table 1.1,
then 1_Samsung appears on the display. When preset button ⑩ is pressed or knob
② is turned 1 click to the right.
7) Once the name of the Bluetooth device you wish to connect is displayed, in this
example 1_Samsung, press knob ② to have the Samsung device connected.
8) If the connection is successful, the Bluetooth logo appears on the display and paired
phone Samsung CONNECTED appears on the display.
Note:
a. The name of the Bluetooth device is sent by the device and stored in the KIA
Bluetooth radio memory. In most Bluetooth devices, the name can be changed by
the user. Refer to the user manual of your Bluetooth device for details.
b.
If only 4 Bluetooth devices have been paired, as in the example shown in table 1.1
above, then NO PHONE is displayed when the empty preset button (5 and 6
according to the above example) is pressed.
c. If the selected previously paired Bluetooth device is switched off or if the Bluetooth
feature is switched off, then the KIA Bluetooth radio will display FAIL when
connection is attempted.
9
BLUETOOTH – Bluetooth Function
1.4 Deleting a Previously Paired Bluetooth Device
If you no longer need to use a paired Bluetooth device with the KIA Bluetooth radio, it can
be deleted. it from the registration assignment for another mobile phone.
Refer to the example of paired devices shown in table 1.1 on the previous page.
1) Press knob ⑳, to select BLUETOOTH mode.
2) Press knob ② and REG PHONE appears on the display.
3)
Turn knob ② until DEL PHONE is displayed.
4) When DEL PHONE appears on the display, press knob ②, PRESET? is displayed.
5) Press the preset button ⑩ ~ ⑮ to display the name of the Bluetooth device name of
the mobile phones or music players previously paired. You may also turn the knob ②
to display the paired devices.
6) Once the name of the Bluetooth device you wish to delete is displayed, in this example
1_Samsung, press knob ② to have the Samsung device deleted.
7)
The display will then show DELETE NO or if knob ② is turned, DELETE OK on the
display.
8) To confirm your wish to delete the selected device, when DELETE OK appears on the
display press knob ②
9) If the Bluetooth device being deleted (in this example) was connected, the display will
show Samsung LOST.
10) In the example above, the number of paired devices is now reduced to 3, leaving 3
vacant memory locations for additional devices. Table 1.2 shows the example.
- Table 1.2 -
Preset No. Device name of mobile phone
1 Sony (For example)
2 Nokia (For example)
3 Motorola (For example)
4 EMPTY
5 EMPTY
6 EMPTY
10
BLUETOOTH
– Bluetooth Function
1.5. Basic Telephone Operation
1.5.1. Using the KIA Bluetooth Radio for Hands-free Calls
1) When an incoming call arrives at the KIA Bluetooth radio via your connected Bluetooth
mobile phone, INCOMING appears on the display for 3 seconds then the calling
telephone number is shown.
2) Press button ⑳ to answer the incoming call. HANDSFREE appears on the display.
3) To end the call, press button and the call will end and CALL END is displayed.
4) If you wish to reject an incoming call, press button .
5) To make an outgoing call use the keypad of the connected Bluetooth mobile phone to
enter a number and press the OFF HOOK (green) button on your mobile phone.
6) OUTGOING is displayed on the KIA Bluetooth radio and the call continues in handsfree mode.
7) The call can be ended by pressing button the ON HOOK (red) button of the
connected mobile phone.
Note: It is possible that during an incoming or outgoing call, the connection between
your phone and the other party may drop out or end for no apparent reason. In
most cases, this will be due to the mobile telephone network and not the
connection between the Bluetooth car radio and your phone.
Note: Some mobile phones may not reject an incoming call by pressing button . If
this is the case, press the ON HOOK (red) button on the connected mobile phone
to reject the incoming call.
1.5.2. Last Number Redial
1) Select BLUETOOTH mode by pressing button ⑳. To making a call to the last dialed
number, press button ⑳ again. OUTGOING appears on the radio display for 1
second.
Note: Some mobile phones may require an additional press of button ⑳ to start the last
number redial call.
1.5.3. Switching to Private (handset) Mode During a Call
During an incoming or outgoing call started in hands-free mode, it is possible to switch to
the private call mode using the mobile phone handset to speak to and hear the calling
party in private.
1) Press button ⑳ during the conversation; PRIVATE appears on the display.
2) To switch back to hands-free mode using the KIA Bluetooth radio, press button ⑳
again during the private conversation; HANDSFREE is shown on the display and
hands-free call operation continues.
Note: The above switching function may cause disconnection of the Bluetooth link
between the KIA Bluetooth radio and some mobile phones. If button ⑳ is
pressed during the private conversation, the Bluetooth connection will return
automatically, if the connected mobile phone allows.
11
21
21
21
21
BLUETOOTH
– Phonebook Function
2. Phonebook Function
2.1. Using the Phonebook
1) A name with a maximum length of 16 characters and a phone number with a maximum
length of 20 digits can be stored and displayed on the KIA Bluetooth radio.
2) 6 ‘Volumes’, selected by pressing the preset buttons contain 13 ‘Pages’, selected by
turning knob ② are provided for phonebook entry storage. A total of 78 entries
consisting of a name and number can therefore be stored. Table 2.1 provides an
overview of the structure of the phonebook.
3) It is possible to browse the entries contained in each volume (preset) by using knob ②;
each name and then phone number is displayed as the knob is turned. To search the
next volume (preset), press the preset button and turn the knob until the desired entry
is shown on the display.
4) When the phonebook entry name or number is displayed on the screen, press button
⑳ to call the entry.
5) A new phonebook entry name or number can be added or an existing entry can edited
directly using the radio controls. See section 2.3.2.
6) The last received calling number can be saved in the phonebook. See section 2.3.1.
7) Phonebook entries stored on your mobile phone can be transferred to the KIA
Bluetooth radio phonebook one-by-one or as a complete phonebook. See section 2.2
8) Phonebook entries can be deleted one-by-one or the entire contents can be deleted.
See section 2.3.3.
Note:
a. Some mobile phones may not be capable of transferring name and numbers to the KIA
Bluetooth radio.
b. Some mobile phones may not be capable of transferring a complete phonebook, only a
single name and number at a time.
c. During phonebook transfer, some mobile phones may disconnect from the KIA
Bluetooth radio.
d. If the phonebook of the mobile phone contains image data, phonebook entries may not
be transferred correctly.
e. After transferring name and number entries, first and second names may be swapped
when displayed on the KIA Bluetooth radio.
- Table 2.1 -
PAGE
No.
PRESET No.
PAGE 1 PAGE 2 PAGE 3 PAGE 4 … PAGE 12 PAGE 13
1 1 7 13 19 … 67 73
2 2 8 14 20 … 68 74
3 3 9 15 21 … 69 75
4 4 10 16 22 … 70 76
5 5 11 17 23 … 71 77
6 6 12 18 24 … 72 78
12
Loading...