KENWOOD TK-7302E User Manual
TK-7302/ TK-8302
VHF FM TranscEiVEr/
UHF FM TranscEiVEr
insTrUcTion ManUal
ÉMETTEUr-rÉcEPTEUr FM VHF/
ÉMETTEUr-rÉcEPTEUr FM UHF
MoDE D’EMPloi
TranscEPTor FM VHF/
TranscEPTor FM UHF
ManUal DE insTrUccionEs
ricETrasMETTiTorE FM VHF/
ricETrasMETTiTorE FM UHF
ManUalE Di isTrUzioni
VHF-FM-TranscEiVEr/
UHF-FM-TranscEiVEr
BEDiEnUngsanlEiTUng
VHF FM zEnDonTVangEr/
UHF FM zEnDonTVangEr
gEBrUiKsaanwijzing
VHF FM EL TELSİZİ/
UHF FM EL TELSİZİ
KUllaniM KilaVUzU
© B62-2169-10 (E)
09 08 07 06 05 04 03 02 01
VHF FM TranscEiVEr/
UHF FM TranscEiVEr
TK-7302/ TK-8302
insTrUcTion ManUal
Firmware Copyrights
The title to and ownership of copyrights for rmware
embedded in Kenwood product memories are reserved for
Kenwood Corporation.
NOTIFICATION
This equipment complies with the essential requirements of
Directive 1999/5/EC.
The use of the warning symbol means the equipment is
subject to restrictions of use in certain countries.
This equipment requires a licence and is intended for use in
the countries as below.
aT BE DK Fi Fr DE gr is
iE iT
sE cH gB cY
lT
MT Pl sK si Bg ro
li lU nl no PT Es
cz EE HU lV
iso3166
EnglisH
Information on Disposal of Old Electrical and Electronic Equipment and Batteries
(applicable for EU countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable
of handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you.
Proper recycling and waste disposal will help conserve resources whilst preventing
detrimental effects on our health and the environment.
Notice: The sign "Pb" below the symbol for batteries indicates that this battery contains lead.
Thank You
We are grateful you have chosen Kenwood for your personal mobile applications.
This instruction manual covers only the basic operations of your mobile radio. Ask your dealer for
information on any customized features they may have added to your radio.
noTices To The user
◆ Government law prohibits the operation of unlicensed transmitters within the territories under
government control.
◆ Illegaloperationispunishablebyneand/orimprisonment.
◆ Referservicetoqualiedtechniciansonly.
SAFETY: It is important that the operator is aware of, and understands, hazards
common to the operation of any transceiver.
◆ EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.)
Turn OFF your transceiver while taking on fuel or while parked in gasoline service stations. Do
not carry spare fuel containers in the trunk of your vehicle if your transceiver is mounted in the
trunk area.
◆ INJURY FROM RADIO FREQUENCY TRANSMISSIONS
Do not operate your transceiver when somebody is either standing near to or touching the
antenna, to avoid the possibility of radio frequency burns or related physical injury.
◆ DYNAMITE BLASTING CAPS
Operating the transceiver within 500 feet (150 m) of dynamite blasting caps may cause them
to explode. Turn OFF your transceiver when in an area where blasting is in progress, or where
“TURN OFF TWO-WAY RADIO” signs have been posted. If you are transporting blasting caps
in your vehicle, make sure they are carried in a closed metal box with a padded interior. Do not
transmit while the caps are being placed into or removed from the container.
i
PrecauTions
Observethefollowingprecautionstopreventre,personalinjury,andtransceiver
damage.
• Donotattempttocongurethetransceiverwhiledriving;itistoodangerous.
• Do not disassemble or modify the transceiver for any reason.
• Do not expose the transceiver to long periods of direct sunlight, nor place it near heating
appliances.
• If an abnormal odor or smoke is detected coming from the transceiver, switch the
transceiver power off immediately, and contact your
• Useofthetransceiverwhileyouaredrivingmaybeagainsttrafclaws.Pleasecheck
and observe the vehicle regulations in your area.
• Donotuseoptionsnotspeciedby
◆ The transceiver operates in 12 V negative ground systems only! Check the battery polarity and
voltage of the vehicle before installing the transceiver.
◆ Use only the supplied DC power cable or a Kenwood optional DC power cable.
◆ Donotcutand/orremovethefuseholderontheDCpowercable.
For passenger safety, install the transceiver securely using the supplied mounting bracket and
screw set so the transceiver will not break loose in the event of a collision.
Kenwood.
Kenwood dealer.
CONTENTS
GETTING STARTED ................................................................................................1
GETTING ACQUAINTED .........................................................................................
PROGRAMMABLE FUNCTIONS .............................................................................
BASIC OPERATIONS ...............................................................................................
SCAN ........................................................................................................................
DTMF CALLS ...........................................................................................................
SIGNALING ..............................................................................................................
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION .....................................9
5-TONE SIGNALING ..............................................................................................
ADVANCED OPERATIONS ....................................................................................
BACKGROUND OPERATIONS ..............................................................................
ii
3
4
5
6
7
8
10
10
13
GETTING STARTED
Note: The following instructions are for use by your Kenwood dealer, an authorized Kenwood
service facility, or the factory.
Supplied AcceSSorieS
Carefully unpack the transceiver. We recommend that you identify the items
listed below before discarding the packing material. If any items are missing or
have been damaged during shipment, le a claim with the carrier immediately.
DC power cable (with fuses). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
• 10 A fuse
Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Screw set
• 5 x 16 mm self-tapping screw
• Hex-headed screw with washer
• Spring washer
• Flat washer
Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
prepArAtion
Various electronic equipment in your vehicle may malfunction if they are not properly protected
from the radio frequency energy which is present while transmitting. Typical examples include
electronic fuel injection, anti-skid braking, and cruise control. If your vehicle contains such
equipment, consult the dealer for the make of vehicle and enlist his/her aid in determining if they
will perform normally while transmitting.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
n Power Cable Connection
The transceiver operates in 12 V negative ground systems only! Check the battery polarity and
voltage of the vehicle before installing the transceiver.
1 Check for an existing hole, conveniently located in the rewall, where the
power cable can be passed through.
• If no hole exists, use a circle cutter to drill a hole, then install a rubber grommet.
2 Run the power cable through the rewall and into the engine compartment.
3 Connect the red lead to the positive (+) battery terminal and the black lead
to the negative (–) battery terminal.
• Place the fuse as close to the battery as possible.
4 Coil the surplus cable and secure it with a retaining band.
• Be sure to leave enough slack in the cables so the transceiver can be removed
for servicing while keeping the power applied.
1
Loading...