Kenwood KM040, KM030 User Manual

min

instructions

Chef KM030 series/Major KM040 series

Congratulations on buying a Kenwood. With such a wide range of attachments available, it’s more than just a mixer. It’s a state-of-the-art kitchen machine. We hope you’ll enjoy it.

Robust. Reliable. Versatile. Kenwood.

Kenwood

safety

●

Switch off and unplug before fitting or removing tools/attachments, after use and before cleaning.

●

Keep your fingers away from moving parts and fitted attachments.

●

Never leave the machine on unattended.

●

Never use a damaged machine. Get it checked or repaired: see ‘service’, page

●

Never use an unauthorised attachment or more than one attachment at once.

●

Never exceed the maximum capacities on page 4.

●

When using an attachment, read the safety instructions that come with it.

●

Take care when lifting this appliance as it is heavy. Ensure the head is locked and that the bowl, tools, outlet covers and cord are secure before lifting.

●

Never let the cord hang down where a child could grab it.

●

Never let the power unit, cord or plug get wet.

●

Do not let infirm people use the appliance without supervision.

●

Do not let children use or play with the appliance.

●

Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

before plugging in

important - UK only●Make sure your electricity supply is the same as the one shown on the

underside of your machine.

●

The wires in the cord are coloured as follows: Green and Yellow = Earth, Blue = Neutral, Brown = Live.

●

The appliance must be protected by a 13A approved (BS1362) fuse.

●

WARNING: THIS APPLIANCE MUST BE EARTHED.

Note:

●

For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).

●

If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.

●

This machine complies with European Economic Community Directive

89/336/EEC.

before using for the first time

1 Remove all packaging. 2 Wash the parts: see ‘care and cleaning’, page 8. 3 Push excess cord into the cord stowage compartment at the back of

the machine.

KENWOOD CHEF AND MAJOR KM030 – KM040 series

know your Kenwood kitchen machine

attachment outlets  high-speed outlet

 medium speed outlet  slow-speed outlet  tool socket

the mixer

 mixer head  outlet catch  bowl  bowl seating pad  head-lift lever  speed switch  power unit  K-beater  whisk  dough hook  spatula  splashguard

control panel

 timer display  power on indicator light  timer decrease button  timer increase button  fold button

start/stop button

KENWOOD CHEF AND MAJOR KM030 – KM040 series







  

















min

sec













CHEF

i n





the mixing tools and some of their uses

K-beater●For making cakes, biscuits, pastry, icing, fillings, éclairs and mashed

potato.

whisk

●

For eggs, cream, batters, fatless sponges, meringues, cheesecakes, mousses, soufflés. Don’t use the whisk for heavy mixtures (eg creaming fat and sugar) - you could damage it.

dough hook

●

For yeast mixtures.

to use your mixer

1 Turn the head-lift lever clockwise  and raise the mixer head till it locks.

to insert a tool

Push up till it stops

 then turn.

3 Fit the bowl onto the base - press down and turn clockwise  4 To lower the mixer head, raise it slightly, then turn the head lift lever

clockwise. Lower into the locked position.

to remove a tool

●

Turn and remove.

5 Connect the mixer to the power supply. The display will show 88:88 and

then clear leaving the power on indicator illuminated .

6 Turn the speed switch  to the desired setting and then press the start/stop

button to start the mixer. The timer will count up in 1 second intervals. The speed can be changed at any time whilst the mixer is operating.

7 Stop the mixer by pressing the start/stop button . The operating time will

be displayed and if the machine is re started the timer will continue counting providing no longer than 3 minutes has elapsed. If the mixer is not used within this time the display will re set to 00:00.

Important - If at any time, the mixer head is raised during an operation, the mixer will automatically stop and it will not re start when the mixer head is lowered. It will only restart when the head is lowered and the start/stop button is pressed.

pulse position

To select pulse turn the speed switch anti clockwise to the position. The mixer will run at maximum speed for as long as the switch is held in this position. When the switch is released it will return to the ‘min’ position and the mixer will stop. Note: If the mixer is running in the timer mode the pulse function will not operate.

fold button

Press and release the fold button and the mixer will automatically operate on minimum speed for 2-3 seconds. The button can be held down for a longer operation or pressed repeatedly as needed to combine ingredients. Note: If the mixer is running in the timer mode the fold function will not operate.

speed switch 

K-beater

●

creaming fat and sugar start on min, gradually increasing to ‘max’.

●

beating eggs into creamed mixtures 4 - ‘max’.

●

folding in flour, fruit etc Min - 1

●

all in one cakes start on min speed, gradually increase to max.

●

rubbing fat into flour min - 2.

whisk

●

Gradually increase to ‘max’.

dough hook

●

Start on ‘min’, gradually increasing to 1.

KENWOOD CHEF AND MAJOR KM030 – KM040 series

the mixer





CHEF

m i n

CHEF

i n

+ 8 hidden pages