Kenwood KDC-120UG User Manual [ru]

KDC-220UI

KDC-120UR KDC-172Y KDC-152R

CD-RECEIVER

INSTRUCTION MANUAL

CD-PECИBEP

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

CD-РЕСІВЕР

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

KDC-120UG

KDC-120UB

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы (годности) данного товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7) лет со дня производства.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного обслуживания KENWOOD, которое он может получить в соответствии с законом о правах потребителя или других законов, связанных с ним.

Условия хранения:

Температура : от -30°C до +85°C Влажность : от 0% до 90%

For Israel

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

1. свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

2. кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100 частин на мільйон;

3. ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

4. шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

5. полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації до 1000 частин на мільйон;

6. полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон.

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Маркировка изделий, использующих лазеры

К корпусу устройства прикреплена табличка, указывающая, что устройство использует лазерные лучи класса 1. Это означает, что в устройстве используются лазерные лучи слабой интенсивности. Они не представляют опасности и не распространяют опасную радиацию вне устройства.

Маркування виробів, обладнаних лазером

На каркас/корпус поміщається наклейка, в якій зазначається, що даний виріб випромінюєє лазерні промені Класу 1. Це означає, що даний апарат використовує лазерні промені слабшого класу. За межами даного апарату не існує небезпеки лазерного випромінювання.

Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Декларация соответствия относительно Директивы RE 2014/53/EU Декларация соответствия относительно Директивы RoHS 2011/65/EU

Производитель:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, ЯПОНИЯ

Представительство в EC:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, НИДЕРЛАНДЫ

Декларація про відповідність вимогам Директиви RE 2014/53/EU Декларація про відповідність вимогам Директиви RoHS 2011/65/EU

Виробник:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Представник у ЕС:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

English

Hereby, JVCKENWOOD declares that the radio equipment “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/KDC-120UG/ KDC-120UB” is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.kenwood.com/cs/ce/eudoc/

Français

Par la présente, JVCKENWOOD déclare que l’équipement radio « KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB » est conforme à la directive 2014/53/UE. L’intégralité de la déclaration de conformité UE est disponible à l’adresse Internet suivante : http://www.kenwood.com/cs/ce/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/KDC-120UG/ KDC-120UB” der Richtlinie 2014/53/EU entspricht. Der volle Text der EU-Konformitätserklärung steht unter der folgenden Internetadresse zur Verfügung: http://www.kenwood.com/cs/ce/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de radioapparatuur “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB” in overeenstemming is met Richtlijn 2014/53/EU. De volledige tekst van de EU-verklaring van overeenstemming is te vinden op het volgende internetadres: http://www.kenwood.com/cs/ce/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che l΄apparecchio radio “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB” è conforme alla Direttiva 2014/53/UE. Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo internet: http://www.kenwood.com/cs/ce/eudoc/

Español

Por la presente, JVCKENWOOD declara que el equipo de radio “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB” cumple la Directiva 2014/53/EU. El texto completo de la declaración de conformidad con la UE está disponible en la siguiente dirección de internet: http://www.kenwood.com/cs/ce/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o equipamento de rádio “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB” está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade da UE está disponível no seguinte endereço de internet: http://www.kenwood.com/cs/ce/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/KDC-120UG/ KDC-120UB” jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności EU jest dostępny pod adresem: http://www.kenwood.com/cs/ce/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že rádiové zařízení “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB” splňuje podmínky směrnice 2014/53/EU. Plný text EU prohlášení o shodě je dostupný na následující internetové adrese: http://www.kenwood.com/cs/ce/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a „KDC-220UI/ KDC-172Y/KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB“ rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU konformitási nyilatkozat teljes szövege az alábbi weboldalon érhető el: http://www.kenwood.com/cs/ce/eudoc/

iii

Svenska

Härmed försäkrar JVCKENWOOD att radioutrustningen “KDC-220UI/KDC-172Y/ KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB” är i enlighet med direktiv 2014/53/EU. Den fullständiga texten av EU-försäkran om överensstämmelse finns på följande Internetadress: http://www.kenwood.com/cs/ce/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB” on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutusvaatimus löytyy kokonaisuudessaan seuraavasta internetosoitteesta: http://www.kenwood.com/cs/ce/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema »KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB« v skladu z Direktivo 2014/53/EU. Celotno besedilo direktive EU o skladnosti je dostopno na tem spletnem naslovu: http://www.kenwood.com/cs/ce/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že rádiové zariadenie „KDC-220UI/KDC-172Y/ KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB“ vyhovuje smernici 2014/53/EÚ. Celý text EÚ vyhlásenia o zhode nájdete na nasledovnej internetovej adrese: http://www.kenwood.com/cs/ce/eudoc/

Dansk

Herved erklærer JVCKENWOOD, at radioudstyret “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB” er i overensstemmelse med Direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde ordlyd er tilgængelig på følgende internetadresse: http://www.kenwood.com/cs/ce/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο ραδιοεξοπλισμός «KDC-220UI/KDC-172Y/ KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB» συμμορφώνεται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση στο διαδίκτυο: http://www.kenwood.com/cs/ce/eudoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et „KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB “ raadiovarustus on vastavuses direktiiviga 2014/53/EL. ELi vastavusdeklaratsiooni terviktekst on kättesaadav järgmisel internetiaadressil: http://www.kenwood.com/cs/ce/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra „KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB” atbilst direktīvas 2014/53/ES prasībām. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā tīmekļa adresē: http://www.kenwood.com/cs/ce/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga „KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB “ atitinka 2014/53/EB direktyvos reikalavimus. Visą EB direktyvos atitikties deklaracijos tekstą galite rasti šiuo internetiniu adresu: http://www.kenwood.com/cs/ce/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar-radju “KDC-220UI/KDC-172Y/KDC-152R/ KDC-120UR/KDC-120UG/KDC-120UB” huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-dikjarazzjoni ta’ konformità huwa disponibbli fl-indirizz intranet li ġej: http://www.kenwood.com/cs/ce/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/ KDC-120UG/KDC-120UB” u skladu s Direktivom 2014/53/EU. Cjeloviti tekst deklaracije Europske unije o usklađenosti dostupan je na sljedećoj internet adresi: http://www.kenwood.com/cs/ce/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că echipamentul radio “KDC-220UI/KDC-172Y/ KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB” este în conformitate cu Directiva 2014/53/UE. Textul integral al declarației de conformitate UE este disponibil la urmatoarea adresă de internet: http://www.kenwood.com/cs/ce/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира, че радиооборудването на “KDC-220UI/KDC-172Y/ KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB” е в съответствие с Директива 2014/53/ЕС. Пълният текст на ЕС декларацията за съответствие е достъпен на следния интернет адрес: http://www.kenwood.com/cs/ce/eudoc/

Turkish

Burada, JVCKENWOOD “KDC-220UI/KDC-172Y/ KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB” radyo ekipmanının 2014/53/AB Direktifine uygun olduğunu bildirir. AB uyumluluk deklarasyonunun tam metni aşağıdaki internet adresinde mevcuttur. http://www.kenwood.com/cs/ce/eudoc/

Русский

JVCKENWOOD настоящим заявляет, что радиооборудование «KDC-220UI/KDC-172Y/ KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB» соответствует Директиве 2014/53/EU. Полный текст декларации соответствия ЕС доступен по следующему адресу в сети Интернет: http://www.kenwood.com/cs/ce/eudoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє, що радіообладнання «KDC-220UI/KDC-172Y/ KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB» відповідає Директиві 2014/53/EU. Повний текст декларації про відповідність ЄС можна знайти в Інтернеті за такою адресою: http://www.kenwood.com/cs/ce/eudoc/

CONTENTS BEFORE USE

BEFORE USE 2

BASICS 3

GETTING STARTED 4

1 Select the display language

and cancel the demonstration 2 Set the clock and date 3 Set the initial settings

RADIO 6

CD/USB/iPod/ANDROID 8

AUX 10

AUDIO SETTINGS 11

DISPLAY SETTINGS 12

INSTALLATION/ CONNECTION 13

TROUBLESHOOTING 16

REFERENCES 17

Maintenance More information

SPECIFICATIONS 19

IMPORTANT

•

To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe

Warning and Caution in this manual.

•

Please keep the manual in a safe and accessible place for future reference.

WARNING

•

Do not operate any function that takes your attention away from safe driving.

•

Do not ingest the battery, Chemical Burn Hazard

The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Caution

Volume setting:

•

Adjust the volume so that you can hear sounds outside the car to prevent accidents.

•

Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

•

Avoid using the external device if it might hinder safe driving.

•

Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

•

Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

•

If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

•

Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected

( 15)

. Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

Remote control (RC-406):

•

Do not leave the remote control in hot places such as on the dashboard.

•

The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

•

The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

How to read this manual

•

Operations are explained mainly using buttons on the faceplate of .

•

English indications are used for the purpose of explanation. You can select the display language from the

•

[XX]

indicates the selected items.

•

( XX)

indicates references are available on the stated page.

[FUNCTION]

menu.

( 6)

ENGLISH

BASICS

Faceplate

slot

Display

window

Attach

Detach

Volume knob

Detach button

To On the faceplate

Turn on the power

Adjust the volume Turn the volume knob.

Select a source

Change the display information Press DISP repeatedly.

Press

• Press and hold to turn off the power.

Press

Flashes when the unit enters searching status.

repeatedly.

( 18, 19)

How to reset

Your preset adjustments will be erased except stored radio stations.

ENGLISH

BASICS

Remote control (RC-406) (supplied for )

Remote sensor (Do not expose to bright sunlight.)

Pull out the insulation sheet when using for the first time.

/ / / / :

Remote control functions are not available.

How to replace the battery

GETTING STARTED

Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows: “SEL LANGUAGE”

1 Turn the volume knob to select

[SPA]

(Spanish), then press the knob.

[ENG]

is selected for the initial setup.

Then, the display shows: “CANCEL DEMO”

KNOB”.

2 Press the volume knob.

[YES]

is selected for the initial setup.

3 Press the volume knob again.

“DEMO OFF” appears.

“PRESS” “VOLUME KNOB”

[ENG]

(English),

[RUS]

“PRESS” “VOLUME

(Russian) or

To On the remote control

Turn on the power Press and hold SRC to turn off the power.

Adjust the volume Press

Select a source Press SRC repeatedly.

ENGLISH

( Pressing SRC does not turn on the power. )

• Press and hold the volume to 15.

Press ATT during playback to attenuate the sound.

• Press again to cancel.

or .

to continuously increase

Set the clock and date

Press the volume knob to enter

2 Turn the volume knob to select

To adjust the clock

3 Turn the volume knob to select

[FUNCTION] [CLOCK]

[CLOCK ADJUST]

, then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Hour

5 Turn the volume knob to select 6 Turn the volume knob to select

Minute

[CLOCK FORMAT] [12H]

[24H]

, then press the knob.

GETTING STARTED

To set the date

7 Turn the volume knob to select 8 Turn the volume knob to select

the knob.

9 Turn the volume knob to select 10 Turn the volume knob to make the settings, then press the knob.

Day

Month Year or Month Day Year

11 Press and hold to exit.

To return to the previous setting item, press

Set the initial settings

Press repeatedly to enter STANDBY.

2 Press the volume knob to enter

•

Pressing AUD enters

[AUDIO CONTROL]

3 Turn the volume knob to select an item (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press

AUDIO CONTROL

SWITCH PREOUT

SP SELECT

REAR/SUBWOOFER

or a subwoofer are connected to the line out terminals on the rear (through an external amplifier).

OFF/5/4/6×9/6/OEM

or 4inches, 6×9inches or 6inches) or OEM speakers for optimum performance.

[DATE FORMAT] [DD/MM/YY]

[DATE SET]

[FUNCTION]

REAR/SUB-W

: Selects according to the speaker size (5inches

, then press the knob.

[MM/DD/YY]

, then press the knob.

directly.

: Selects whether rear speakers

( 15)

, then press

Default:

DISPLAY

EASY MENU

TUNER SETTING

PRESET TYPE

SYSTEM

KEY BEEP

SOURCE SELECT

BUILT-IN AUX

P-OFF WAIT

CD READ 1

(For / ) When entering

ON OFF

•

ZONE 2 illumination changes to light blue color when you enter

[FUNCTION]

•

Refer to the illustration on page 12 for zone identification.

NORMAL

(FM1/FM2/FM3/MW/LW).; button, regardless of the selected band.

Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery.

20M WAIT TIME – – –

:Automatically distinguishes between audio file disc and music CD.;

:Forces to play as a music CD. No sound can be heard if an audio file disc

is played.

[FUNCTION]

:ZONE 1 illumination changes to white color.;

:ZONE 1 illumination remains as

, irregardless of the

:Memorizes one station for each preset button in each band

:Activates the keypress tone.;

:Enables AUX in source selection.;

: 20 minutes ;

40M

OFF – – –

...

[COLOR SELECT]

[EASY MENU]

MIX

:Memorizes one station for each preset

OFF

: 40 minutes ;

:Cancels

:Deactivates.

OFF

:Disables.

60M

: 60 minutes ;

setting.

color.

( 10)

( 13)

ENGLISH

GETTING STARTED

F/W UPDATE

UPDATE SYSTEM

F/W UP xxxx

CLOCK

CLOCK DISPLAY

ENGLISH

РУССКИЙ

ESPANOL

YES

:Starts upgrading the firmware.; NO:Cancels (upgrading is not activated). For details on how to update the firmware, see <www.kenwood.com/cs/ce/>.

:The clock time is shown on the display even when the

unit is turned off.;

Select the display language for information if applicable. By default,

[ENGLISH]

OFF

:Cancels.

is selected.

[FUNCTION]

menu and music

RADIO

Search for a station

Press repeatedly to select RADIO.

2 Press repeatedly (or press / on the remote control) to

select FM1/FM2/FM3/MW/LW.

3 Press S/T (or press S/ on the remote control) to search for a

station.

• To change the searching method for S/T: Press repeatedly. AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number buttons (1to6).

• To select a stored station: Press one of the number buttons (1to6) (or press one of the number buttons (1 to 6) on the remote control).

ENGLISH

Direct Access Tuning

(using the remote control) (for )

1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a frequency. 3 Press to search for a station.

• To cancel, press

• If no operation is done for 10seconds after step automatically canceled.

or DIRECT.

2, Direct Access Tuning is

RADIO

Other settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

OFF

:Cancels.

Default:

OFF

: Cancels.

[PRESET TYPE]. ( 5)

To return to the previous setting item, press

TUNER SETTING

LOCAL SEEK

AUTO MEMORY

MONO SET

NEWS SET ON

REGIONAL ON

AF SET ON

TI ON

: Searches only stations with good reception. ;

•

Settings made are applicable only to the selected source/station. Once

you change the source/station, you need to make the settings again.

YES

:Automatically starts memorizing 6 stations with good reception.;

:Cancels.

•

Selectable only if

:Improves the FM reception, but the stereo effect may be lost.;

OFF

:Cancels.

: The unit will temporarily switch to News Programme if available. ;

OFF

:Cancels.

: Switches to another station only in the specific region using the “AF”

control.;

: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor.;

:Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up).;

OFF

:Cancels.

OFF

[NORMAL]

:Cancels.

is selected for

PTY SEARCH1 Turn the volume knob to select the available Program Type. (See the

CLOCK

TIME SYNC

Available Program Type for

SPEECH

MUSIC

The unit will search for the Program Type categorized under

[MUSIC]

[LOCAL SEEK]/[MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH]

• selectable only when the band is FM1/FM2/FM3.

• If the volume is adjusted during reception of traffic information or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information or news bulletin is turned on.

following.)

Turn the volume knob to select the PTY language (

GERMAN

ON OFF

NEWS, AFFAIRS, INFO CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT POP M CLASSICS, OTHER M OLDIES, FOLK M

if selected.

), then press the knob.

Press

S/T

:Synchronizes the unit’s time to the Radio Data System station time.;

:Cancels.

(music),

[PTY SEARCH]

(information),

ROCK M

(music),

(music)

to start searching.

SPORT, EDUCATE, DRAMA

(music),

EASY M

JAZZ, COUNTRY, NATION M

(music),

ENGLISH/FRENCH

LIGHT M

(music),

[SPEECH]

ENGLISH

CD/USB/iPod/ANDROID

Start playback

The source changes automatically and playback starts.

Eject disc

Label side

USB input terminal

USB

CA-U1EX (max.: 500mA) (optional accessory)

iPod/iPhone

KCA-iP102/KCA-iP103 (optional accessory) or accessory of the iPod/

iPhone

ANDROID

USB cable

(commercially available)

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

Selectable source:

: CD/USB/iPod/

ANDROID

Other models : CD/USB/ANDROID

To On the faceplate On the remote control

Playback/pause Press . Press .

Reverse/Fast-forward

Select a track/file

Select a folder

Repeat play

Random play

Press and hold S/T. Press and hold S/ .

Press S/T. Press S/

Press / . Press / .

Press repeatedly.

TRACK REPEAT/ALL REPEAT FILE REPEAT/FOLDER REPEAT/ALL REPEAT FILE REPEAT/FOLDER REPEAT/REPEAT OFF

: Audio CD

: MP3/WMA/WAV/FLAC file : iPod or ANDROID

Press repeatedly.

DISC RANDOM/RANDOM OFF FOLDER RANDOM/RANDOM OFF

: Audio CD

: MP3/WMA/WAV/FLAC file, iPod or

ANDROID

Press and hold

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the

to select

ALL RANDOM

instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

For ANDROID: Applicable only when

For CD: Only for MP3/WMA files. This does not work for iPod/ANDROID.

For iPod/ANDROID: Applicable only when

For CD: Only for MP3/WMA files.

[BROWSE MODE]

is selected.

[MODE OFF]/[BROWSE MODE]

( 9)

is selected.

( 9)

ENGLISH

CD/USB/iPod/ANDROID

Select control mode

While in iPod source, press 5 repeatedly.

MODE ON

: Control iPod using the iPod itself. However, you can still play/

MODE OFF

While in ANDROID source, press 5 repeatedly.

BROWSE MODE

HAND MODE

pause, file skip, fast-forward or reverse from this unit.

: Control iPod from this unit.

: Control Android device from this unit via KENWOOD

MUSIC PLAY application installed in the Android device.

: Control Android device using the Android device itself via

other media player applications installed in the Android device. However, you can still play/pause and file skip from this unit.

Select music drive

While in USB source, press 5 repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drives device.

Select a file from a folder/list

For iPod/ANDROID, applicable only when selected.

[MODE OFF]/[BROWSE MODE]

1 Press . 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

Turn the volume knob quickly to browse through the list quickly.

Skip Search

Press S/T to search at a preset skip search ratio.

( 10, [SKIP SEARCH])

• Pressing and holding S/T searches at a 10% ratio.

Alphabet search

You can search for a file according to the first character.

For iPod source

(applicable only for CD, USB and ANDROID source)

(applicable only for iPod and ANDROID source)

1 Turn the volume knob quickly to enter character search. 2 Turn the volume knob to select the character.

• Select “ 3 Press S/T to move to the entry position.

” to search for a character other than AtoZ, 0to9.

• You can enter up to 3characters. 4 Press the volume knob to start searching.

For ANDROID source

1 Press / to enter character search. 2 Turn the volume knob to select the character.

^A^: Upper case letters (A to Z) _A_: Lower case letters (a to z)

-0-: Numbers (0 to 9) : Character other than AtoZ, 0to9

***

3 Press the volume knob to start searching.

• To return to the root folder/first file/top menu, press 5.

• To return to the previous setting item, press

• To cancel, press and hold

ENGLISH

CD/USB/iPod/ANDROID

Direct Music Search

1 Press DIRECT. 2 Press the number buttons to enter a track/file number. 3 Press to search for music.

• To cancel, press

• Not available if Random Play is selected.

• Not applicable for iPod and ANDROID source.

Listen to TuneIn Radio/TuneIn Radio Pro/Aupeo

(for )

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Other settings

Press the volume knob to enter

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press

USB

MUSIC DRIVE DRIVE CHANGE

SKIP SEARCH 0.5%/1%/5%/10%

(using the remote control) (for )

or DIRECT.

[FUNCTION]

automatically and playback starts. Repeat steps

the skip search ratio over the total files.

:The next drive (

to 3 to select the following drives.

: While listening to iPod or ANDROID source, selects

[DRIVE 1]

[DRIVE 5]

Default:

) is selected

AUX

Preparation:

Select

[ON]

for

[BUILT-IN AUX]

Start listening

Connect a portable audio player (commercially available).

Auxiliary input jack

3.5mm stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter 2 Turn the volume knob to select 3 Turn the volume knob to select 4 Turn the volume knob to select an item, then press the knob.

AUX

(default)/

5 Press and hold to exit.

To return to the previous setting item, press

DVD/PORTABLE/GAME/VIDEO/TV

[SOURCE SELECT]. ( 5)

[FUNCTION] [SYSTEM] [AUX NAME SET]

Portable audio player

, then press the knob.

ENGLISH

AUDIO SETTINGS

While listening to any source...

1 Press AUD to enter 2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press

(or using the remote control) (for )

1 Press AUD to enter 2 Press J / K to select an item, then press .

AUDIO CONTROL

SUB-W LEVEL

BASS LEVEL –8

MID LEVEL –8

TRE LEVEL –8

EQ PRO

(This setting is stored to

BASS ADJUST BASS CTR FRQ 60HZ/80HZ/100HZ/200HZ

[AUDIO CONTROL]

–15

+15 (0

) Adjusts the subwoofer output level.

to +8 (+2)

to +8 (+1)

[USER]

BASS LEVEL –8

BASS Q FACTOR 1.00/1.25/1.50/2.00

BASS EXTEND ON

directly.

Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

Selects the center frequency.

to +8 (+2):Adjusts the level.

:Turns on the extended bass.;

Default:

or 60/80/

100/200

:Adjusts the quality factor.

OFF

:Cancels.

MID ADJUST MID CTR FRQ 0.5KHZ/1.0KHZ/1.5KHZ/2.5KHZ

MID LEVEL –8

MID Q FACTOR 0.75/1.00/1.25

TRE ADJUST TRE CTR FRQ 10.0KHZ/12.5KHZ/15.0KHZ/17.5KHZ

TRE LEVEL –8

PRESET EQ DRIVE EQ/TOP40/POWERFUL/ROCK/POPS/EASY/JAZZ/NATURAL

BASS BOOST LEVEL1/LEVEL2/LEVEL3

LOUDNESS LEVEL1/LEVEL2

SUBWOOFER SET ON

LPF SUBWOOFER THROUGH

SUB-W PHASE REVERSE

FADER R15

BALANCE L15

USER

:Selects a preset equalizer suitable to the music genre.

(Select

[USER]

[DRIVE EQ]

running noise of the tyres.

boost level.;

frequencies boost to produce a well-balanced sound at a low volume level.;

OFF

:Turns on the subwoofer output.;

85HZ/120HZ/160HZ

85Hz/120Hz/160Hz are sent to the subwoofer.

output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than

[LPF SUBWOOFER]

F15 (0

R15 (0

center frequency.

to +8 (+1):Adjusts the level.

:Adjusts the quality factor.

the center frequency.

to +8 (+1):Adjusts the level.

to use the settings made in

is a preset equalizer that reduces noise outside the car or

OFF

:Cancels.

:All signals are sent to the subwoofer.;

(180°)/

):Adjusts the rear and front speaker output balance.

):Adjusts the left and right speaker output balance.

LV1/LV2/LV3

:Cancels.

LV1/LV2

:Selects your preferred low and high

OFF

:Audio signals with frequencies lower than

NORMAL

(0°):Selects the phase of the subwoofer

[THROUGH]

:Selects the

:Selects

[EQ PRO]

:Selects your preferred bass

:Cancels.

is selected for

ENGLISH

AUDIO SETTINGS

VOLUME OFFSET

SOUND RECNSTR

(Sound reconstruction)

•

[SUB-W LEVEL]/[SUBWOOFER SET]/[LPF SUBWOOFER]/[SUB-W PHASE]

selectable only if

•

[SUB-W LEVEL]/[LPF SUBWOOFER]/[SUB-W PHASE] [SUBWOOFER SET]

For AUX:

–8

to +8(0) ; For other sources: –8 to 0:Preset the initial volume level of each source. (Before adjustment, select the source you want to adjust.)

:Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression.;

[SWITCH PREOUT]

is set to

[ON]. ( 11)

OFF

:Cancels.

[SUBWOOFER]

is selectable only if

[SUB-W]. ( 5)

DISPLAY SETTINGS

Zone identification for color and brightness settings

Zone identification for brightness settings

Set the dimmer

Press and hold DISP to turn on or off the dimmer.

• If you have set and hold this button.

Other settings

Press the volume knob to enter

2 Turn the volume knob to select an item 3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[DIMMER TIME] ( 13)

, it will be canceled once you press

[FUNCTION]

( 13)

, then press the knob.

ENGLISH

DISPLAY SETTINGS

Default:

DISPLAY

COLOR SELECT

DIMMER

BRIGHTNESS

TEXT SCROLL AUTO/ONCE

Preset colors:

BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1 GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ORANGE2 ORANGERED

(For / ) Select color for

Select a zone. (See the illustration on page 12.)

Select a color for the selected zone.

To make your own color, select made will be stored in

Press the volume knob to enter the detailed color adjustment.

Press S/T to select the color (R/G/B) to adjust.

3 Turn the volume knob to adjust the level (0 to 9), then press the knob.

Dim the illumination.

ON DIMMER TIME

Turn the volume knob to adjust the

(Default:

Select a zone. (See the illustration on page 12.)

2 0

automatically, or scroll only once.;

RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1

ALL ZONE, ZONE 1

INITIAL COLOR/VARIABLE SCAN/CUSTOM R/G/B

[CUSTOM R/G/B]

:Dimmer is turned on.;

:Set the dimmer on and off time.

[ON]: 18:00; [OFF]: 6:00

to 31: Select your preferred brightness level for the selected zone.

:Select whether to scroll the display information

and

[CUSTOM R/G/B]

OFF

:Cancels.

)

OFF

ZONE 2

separately.

/preset colors*

. The color you have

[ON]

time, then press the knob.

[OFF]

time, then press the knob.

:Cancels.

INSTALLATION/CONNECTION

Warning

•

The unit can only be used with a 12V DC power supply, negative ground.

•

Disconnect the battery’s negative terminal before wiring and mounting.

•

Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire

(black) to prevent a short circuit.

•

To prevent a short circuit: – Insulate unconnected wires with vinyl tape. – Be sure to ground this unit to the car’s chassis again after installation. – Secure the wires with cable clamps and wrap vinyl tape around the wires that come into

contact with metal parts to protect the wires.

Caution

•

For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.

•

Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during

and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

•

Do not connect the [ wires of speakers to the car chassis or Ground wire (black), or connect

them in parallel.

•

Mount the unit at an angle of less than 30º.

•

If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red)

to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key.

•

Keep all cables away from heat dissipate metal parts.

•

After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are

working properly.

•

If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old

fuse with one that has the same rating.

ENGLISH

INSTALLATION/CONNECTION

Basic procedure

Remove the key from the ignition switch, then disconnect the

[

terminal of the car battery.

Connect the wires properly.

See Wiring connection.

Install the unit to your car.

See Installing the unit (in-dash mounting).

Connect the [ terminal of the car battery.

Detach the faceplate and reset the unit.

Part list for installation

(A)

Faceplate

(C)

Mounting sleeve

(E)

Extraction key

( 15)

(B)

Trim plate

(D)

Wiring harness

( 3)

Installing the unit (in-dash mounting)

Do the required wiring.

( 15)

Hook on the top side

Orientate the trim plate as illustrated before fitting.

Bend the appropriate tabs to hold the mounting sleeve firmly in place.

How to remove the unit

Detach the faceplate.

Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out.

Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the

illustration.

Dashboard of your car

ENGLISH

INSTALLATION/CONNECTION

Wiring connection

Antenna terminal

Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles

You may need to modify the wiring of the supplied wiring harness as illustrated below.

A7 (Red) Ignition wire (Red)

A4 (Yellow)

Default wiring

A4 Yellow : Battery A5 Blue/White*

Color and function

: Power control A7 Red : Ignition (ACC) A8 Black : Earth (ground) connection B1

Purple B2 B3 B4 B5 B6 B7 B8

]

Purple/black

]

Gray

Gray/black

]

White

White/black

Green

]

Green/black

[

: Rear speaker (right)

: Front speaker (right)

: Front speaker (left)

: Rear speaker (left)

Battery wire (Yellow)

Output terminals

UnitVehicle

Yellow (Battery wire)

Red (Ignition wire)

Red (A7)

Yellow (A4)

ISO connectors

If your car does not have an ISO terminal:

We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult

Fuse (10A)

your car audio dealer.

When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.

If no connections are made, do not let the wire come out from the tab.

Light blue/yellow (Steering remote

STEERING WHEEL

REMOTE INPUT

To the steering wheel remote control adapter

REMOTE CONT

control wire)

Blue/White*

(Power control wire/ Antenna control wire)

Brown (Mute control wire)

To the power control terminal when using the

ANT CONT

optional power amplifier or to the antenna control

P. CONT

terminal in the vehicle

To the terminal that is grounded when the telephone rings or during conversation

MUTE

(To connect the Kenwood navigation system, refer your navigations manual.)

NOTE: Total output for Blue/White wire (*1) + (*2) is 12V 350mA

( 17)

ENGLISH

TROUBLESHOOTING

Symptom Remedy

Sound cannot be heard.

“MISWIRING CHECK WIRING THEN PWR ON” appears.

“PROTECTING SEND SERVICE” appears.

General

•

Sound cannot be heard.

•

The unit does not turn on.

•

Information shown on the

display is incorrect.

The unit does not work at all. Reset the unit.

•

Radio reception is poor.

•

Static noise while listening

Radio

to the radio.

Disc cannot be ejected.

Noise is generated. Skip to another track or change the disc.

Tracks do not play back as you intended them to play.

“READING” keeps flashing. Do not use too many hierarchical levels or folders.

Elapsed playing time is not

CD/USB/iPod

correct.

Correct characters are not displayed (e.g. album name).

ENGLISH

•

Adjust the volume to the optimum level.

•

Check the cords and connections.

Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.

Send the unit to the nearest service center.

Clean the connectors.

Connect the antenna firmly.

Press and hold not to drop the disc when it is ejected. If this does not solve the problem, reset the unit.

Playback order is determined when files are recorded.

This is caused by how the tracks are recorded.

•

This unit can only display uppercase letters,

numbers, and a limited number of symbols.

•

Depending on the display language you have

selected displayed correctly.

( 17)

( 3)

to forcibly eject the disc. Be careful

( 6)

, some characters may not be

( 3)

Symptom Remedy

“NA FILE” Make sure the disc contains supported audio files.

“NO DISC” Insert a playable disc into the loading slot.

“TOC ERROR” Make sure the disc is clean and inserted properly.

“PLEASE EJECT” Reset the unit. If this does not solve the problem, consult

“NO DEVICE” Connect a USB device, and change the source to USB again.

“COPY PRO” A copy-protected file is played.

CD/USB/iPod

“NA DEVICE” Connect a supported USB device, and check the

“NO MUSIC” Connect a USB device that contains playable audio files.

“iPod ERROR”

•

Sound cannot

be heard during playback.

•

Sound output only

from the Android device.

ANDROID

Cannot playback at

[BROWSE MODE]

your nearest service center.

connections.

•

Reconnect the iPod.

•

Reset the iPod.

•

Reconnect the Android device.

•

If in

[HAND MODE]

on the Android device and start playback.

•

If in

[HAND MODE]

application or use another media player application.

•

Restart the Android device.

•

If this does not solve the problem, the connected Android

device is unable to route the audio signal to unit.

•

Make sure KENWOOD MUSIC PLAY APP is installed on the

Android device.

•

Reconnect the Android device and select the appropriate

control mode.

•

If this does not solve the problem, the connected Android

device does not support

, launch any media player application

, relaunch the current media player

( 8)

[BROWSE MODE]. ( 18)

( 18)

TROUBLESHOOTING

REFERENCES

Symptom Remedy

“NO DEVICE” or “READING” keeps flashing.

Playback is intermittent

ANDROID

or sound skips.

“ANDROID ERROR”/ “NADEVICE”

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory.

When a call comes in, “CALL” appears.

•

To continue listening to the audio system during a call, press . “CALL” disappears

and the audio system resumes.

When the call ends, “CALL” disappears.

•

Switch off the developer options on the Android device.

•

Reconnect the Android device.

•

If this does not solve the problem, the connected Android

device does not support

Turn off the power saving mode on the Android device.

•

Reconnect the Android device.

•

Restart the Android device.

(The audio system pauses.)

(The audio system resumes.)

[BROWSE MODE]. ( 18)

( 15)

Maintenance

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector.

Handling discs

•

Do not touch the recording surface of the disc.

•

Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

•

Do not use any accessories for the disc.

•

Clean from the center of the disc and move outward.

•

Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

•

When removing discs from this unit, pull them out horizontally.

•

Remove burrs from the center hole and disc edge before inserting a disc.

More information

For: – Latest firmware updates and latest compatible item list

– Any other latest information

Visit <www.kenwood.com/cs/ce/>.

General

•

This unit can only play the following CDs:

•

For detailed information and notes about the playable audio files, visit

<www.kenwood.com/cs/ce/audiofile/>.

Connector (on the reverse side of the faceplate)

ENGLISH

+ 47 hidden pages