Kenwood DNX5060EX, DNX6490BT, DNX5190, DNX6190HD, DNX6990HD Instruction Manual

...

0 (0)

GPS NAVIGATION SYSTEM SYSTEME DE NAVIGATION GPS SISTEMA DE NAVEGACIÓN GPS

DNX7190HD DNX6990HD DNX6190HD DNX5190 DNX5060EX

GPS NAVIGATION INSTRUCTION MANUAL

MANUEL D'INSTRUCTIONS DE NAVIGATION DU GPS

MANUAL DE INSTRUCCIONES DE NAVEGACIÓN GPS

Contents

End-User License Agreements 4

Find It and Go! 11

Finding a Restaurant 11 Following Your Route 12 Adding a Via Point 12 Taking a Detour 12 Stopping the Route 12

Where To? 13

Searching Near Another Location 13 Go! Page Options 13 Finding an Address 13 Finding a Place by Spelling the Name 14 Using the On-Screen Keyboard 14 Finding Places in a Different Area 14 Narrowing Your Search 14

Favorites 15

Saving Places You Find 15 Saving Your Current Location 15 Setting a Home Location 15 Viewing Saved Places 16 Editing Saved Places 16 Deleting a Favorite 16

Getting Started 10

Using the Navigation System 10 Help When You Need It 10

The Main Pages 17

Viewing the Map Page 17 Using myTrends 17 Trip Computer 17 Resetting Trip Information 17 Turn List Page 18 Next Turn Page 18 About Junction View 18 GPS Info Page 18

Creating and Editing Routes 19

Creating a New Custom Route 19 Editing Custom Routes 19 Saving and Modifying the Active Route 19 Navigating a Saved Route 19 Deleting All Saved Routes 19 Stopping Your Route 19 Adding a Detour to a Route 20 Taking a Detour Around Specified Areas 20 Adding a Custom Avoidance 20 Using Multiple Route Preview 20 Using trafficTrends 20

Using ecoRoute™ 21

About ecoRoute 21 Creating a Vehicle Profile 21 Resetting Your Vehicle Profile 21 Calibrating Fuel Economy 21 Taking the ecoChallenge 21 About ecoChallenge Scores 21 Hiding Your ecoChallenge Score 22 Resetting Your Score 22 Viewing Your Fuel Economy 22 About the Mileage Report 22 Viewing a Mileage Report 22 Exporting a Mileage Report 22 Setting Routes that Use Less Fuel 22

2 GPS Navigation Instruction Manual

Traffic Information 23

Understanding FM TMC Traffic 23 Traffic in Your Area 23 Traffic on Your Route 23 Viewing the Traffic Map 23 Viewing Traffic Delays 23

Appendix 26

Updating the Software 26 Updating the Map Data 26 Safety Cameras 26 Custom POIs (Points of Interest) 27 Finding Custom POIs 27 Deleting Custom POIs 27 Saving Trip Logs 27

Customizing the Settings 24

Customizing the Navigation System 24 Changing the System Settings 24 Changing the Map Settings 24 Changing the Navigation Settings 24 Adjusting the Display Settings 24 Route Preferences 24 Updating the Time Settings 25 Setting the Languages 25 Adding Security 25

Icons Used in This Manual

Important precautions are described to prevent injuries and potentially dangerous situations.

Special instructions, supplementary explanations, limitations, and reference pages are described.

Manual Conventions

When you are instructed to “touch” something, use your finger to touch an item on the screen.

The small arrows (>) used in the text indicate that you should touch a series of items. For example, if you see “touch Where To? > Favorites” you should touch Where To?, and then touch Favorites.

English 3

End-User License Agreements

Software License Agreement

BY USING THE DNX7190HD / DNX6990HD, DNX6190HD / DNX5190 / DNX5060EX, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY.

Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin and/or its third-party providers.

You acknowledge that the Software is the property of Garmin and/or its third-party providers and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software, for which source code is not provided, are valuable trade secrets of Garmin and/or its third-party providers and that the Software in source code form remains a valuable trade secret of Garmin and/or its thirdparty providers. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America or the export control laws of any other applicable country.

NAVTEQ® End-user License Agreement

The software embedded in your Garmin product (the “Software”) is owned by Garmin Ltd. or its subsidiaries (“Garmin”). The third-party map data embedded in or accompanying your Garmin product (the “Map Data”) is owned by NAVTEQ North America LLC and/or its affiliates (“NAVTEQ”) and is licensed to Garmin. Garmin also licenses information, text, images, graphics, photographs, audio, video and other applications and data from third-party data providers (“Third-Party Content Data”). The Map Data and Third-Party Content Data are collectively the “Data”. Both the Software and Data are protected under copyright laws and international copyright treaties. The Software and Data are licensed, not sold. The Software and Data are provided under the following licence and are subject to the following terms and conditions which are agreed to by the End User (“you” or “your”), on the one hand, and Garmin and its licensors (including their licensors and suppliers) and affiliated companies on the other hand.

IMPORTANT: READ THIS LICENCE CAREFULLY BEFORE USING THIS PRODUCT. INSTALLING, COPYING OR OTHERWISE USING THIS PRODUCT INDICATES YOUR ACKNOWLEDGEMENT THAT YOU HAVE READ THIS LICENCE AND AGREE TO ITS TERMS. IF YOU DO NOT AGREE, RETURN THE COMPLETE PRODUCT WITHIN 7 DAYS OF THE DATE YOU ACQUIRED IT (IF PURCHASED NEW ) FOR A FULL REFUND TO THE DEALER FROM WHICH YOU PURCHASED THIS PRODUCT.

Licence Terms and Conditions

Garmin (“we” or “us”) provides you with storage media containing the computer Software (the “Software”) and the embedded or accompanying Data, including any “online” or electronic documentation and printed materials (together called the “Product” for purposes of this Licence Agreement), and grants you a limited, nonexclusive licence to use the Product in accordance with the terms of this Agreement. You agree to use this Data together with the Garmin product solely for personal use, or if applicable, for use in your business’ internal operations and not for service bureau, time-sharing, resale or other similar purposes. Accordingly, but subject to the restrictions set forth in the following paragraphs, you may copy this Data only as necessary for your use to (i) view it and (ii) save it, provided that you do not remove any copyright notices that appear and do not modify the Software or Data in any way. You agree not to otherwise reproduce, copy, modify, decompile, disassemble, reverse engineer or create derivative works of any portion of the Product and you may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws. Garmin also reserves the right to discontinue offering any Data supplied by any third-party supplier if such supplier ceases to supply such content or Garmin’s contract with such supplier terminates for any reason.

Restrictions. Except where you have been specifically licensed to do so by Garmin and without limiting the preceding paragraph, you may not use this Data with any products, systems or applications installed or otherwise connected to or in communication with vehicles and which are capable of dispatch, fleet management or similar applications where the Data is used by a central control centre in dispatching a fleet of vehicles. In addition, you are prohibited from renting or leasing the Data or the Garmin products containing the Data to any other person or third party. Only those hire car companies that are specifically authorised by Garmin in writing to rent Garmin products containing the Data to their rental customers are permitted to rent out such products.

4 GPS Navigation Instruction Manual

nüMaps™ Lifetime. If you purchase a nüMaps Lifetime subscription (sold separately), you will receive up to four (4) Map Data updates per year, when and as such updates are made available on Garmin’s website, for one (1) compatible Garmin product until your product’s useful life expires or Garmin no longer receives Map Data from NAVTEQ, whichever is shorter. The updates you receive under the subscription will be updates to the same geographic Map Data originally included with your Garmin product when originally purchased. In some instances, your Garmin product might not have sufficient memory remaining for you to load an update to the same Map Data originally included with your Garmin product, in which case you will need to either (a) select reduced Map Data coverage for your updates or (b) purchase separately a microSD card or an SD card (as applicable to your Garmin product) and load all or a portion of the Map Data coverage for your updates to the card and insert the card into the microSD card or SD card slot contained in your Garmin product. Garmin may terminate your nüMaps Lifetime subscription at any time if you violate any of the terms of this Agreement or your subscription. Your nüMaps Lifetime subscription may not be transferred to another person or another Garmin product.

No warranty. This Product (including the Data) is provided to you “as it is” and you agree to use it at your own risk. Garmin and its licensors (and their licensors and suppliers) make no guarantees, representations or warranties of any kind, express or implied, arising by law or otherwise, including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability, merchantability, fitness for a particular purpose, usefulness, use or results to be obtained from the Product or that the Data or server will be uninterrupted or error-free.

Disclaimer of warranty. GARMIN AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. NO ORAL OR WRITTEN ADVICE OR INFORMATION PROVIDED BY GARMIN OR ITS SUPPLIERS AND LICENSORS SHALL CREATE A WARRANTY AND YOU ARE NOT ENTITLED TO RELY ON ANY SUCH ADVICE OR INFORMATION. THIS DISCLAIMER OF WARRANTIES IS AN ESSENTIAL CONDITION OF THIS AGREEMENT. Some States, Territories and Countries do not allow certain warranty exclusions, so to that extent the above exclusion may not apply to you.

Disclaimer of liability. GARMIN AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFORMATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE DATA OR INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF GARMIN OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. GARMIN’S AND ITS LICENSORS’ TOTAL AGGREGATE LIABILITY WITH RESPECT TO ITS OBLIGATIONS UNDER THIS AGREEMENT OR OTHERWISE WITH RESPECT TO THE GARMIN PRODUCT OR THE DATA SHALL NOT EXCEED $1.00. Some States, Territories and Countries do not allow certain liability exclusions or damages limitations, so to that extent the above may not apply to you.

Disclaimer of endorsement. Reference to any products, services, processes, hypertext links to third parties or other Data by trade name, trademark, manufacturer, supplier or otherwise does not necessarily constitute or imply its endorsement, sponsorship or recommendation by Garmin or its licensors. Product and service information are the sole responsibility of each individual vendor. The NAVTEQ name and logo, the NAVTEQ and NAVTEQ ON BOARD trademarks and logos and other trademarks and trade names owned by NAVTEQ North America LLC may not be used in any commercial manner without the prior written consent of NAVTEQ.

Export control. You agree not to export from anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licences and approvals required under, applicable export laws, rules and regulations.

Indemnity. You agree to indemnify, defend and hold Garmin and its licensors (including their respective licensors, suppliers, assignees, subsidiaries, affiliated companies and the respective officers, directors, employees, shareholders, agents and representatives of each of them) free and harmless from and against any liability, loss, injury (including injuries resulting in death), demand, action, cost, expense or claim of any kind or character, including but not limited to lawyer's

English 5

End-User License Agreements

fees, arising out of or in connection with any use or possession by you of the Product (including the Data).

Canadian map data. The Map Data for Canada may include or reflect data of licensors, including Her Majesty and Canada Post. Such data is licensed on an “as it is” basis. The licensors, including Her Majesty and Canada Post, make no guarantees, representations or warranties respecting such data, either express or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a particular purpose. The licensors, including Her Majesty and Canada Post, shall not be liable in respect of any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action alleging any loss, injury or damages, direct or indirect, which may result from the use or possession of the data or the Map Data. The licensors, including Her Majesty and Canada Post, shall not be liable in any way for loss of revenues or contracts, or any other consequential loss of any kind resulting from any defect in the data or the Map Data. You shall indemnify and save harmless the licensors, including Her Majesty the Queen, the Minister of Natural Resources of Canada and Canada Post and their officers, employees and agents from and against any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action, alleging loss, costs, expenses, damages or injuries (including injuries resulting in death) arising out of the use or possession of the data or the Map Data. The terms contained in this Section are in addition to all of the rights and obligations of the parties under the Agreement. To the extent that any of the provisions of this Section are inconsistent with, or conflict with, any other provisions of the Agreement, the provisions of this Section shall prevail.

United States Map Data. NAVTEQ holds a nonexclusive licence from the United States Postal Service® to publish and sell ZIP+4® information. ©United States Postal Service® 2010. Prices are not established, controlled or approved by the United States Postal Service®. The following trademarks and registrations are owned by the USPS: United States Postal Service, USPS and ZIP+4.

Canadian Map Data. Map Data for Canada includes information taken with permission from Canadian authorities, including ©Her Majesty, ©Queen's Printer for Ontario, ©Canada Post, GeoBase®, ©Department of Natural Resources Canada. All rights reserved.

Australian Map Data. Map Data for Australia is based on data NAVTEQ has licensed from PSMA

6 GPS Navigation Instruction Manual

Australia Limited (www.psma.com.au). In addition, the Product incorporates data which is ©2010 Telstra Corporation Limited, GM Holden Limited, Intelematics Australia Pty Ltd, Sentinel Content Pty Limited and Continental Pty Ltd. If your Product uses RDS-TMC Codes contained in the Map Data, the traffic location codes are ©2010 Telstra Corporation Limited and its licensors.

Term. This Agreement is effective until such time as (i) if applicable, your subscription term is either terminated (by you or by Garmin) or expires, or (ii) Garmin terminates this Agreement for any reason, including, but not limited to, if Garmin finds that you have violated any of the terms of this Agreement. In addition, this Agreement shall terminate immediately upon the termination of an agreement between Garmin and any third party from whom Garmin licenses the Data.

Entire agreement. These terms and conditions constitute the entire agreement between Garmin (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter.

Governing law.

(a) For European Union NAVTEQ Data The above terms and conditions shall be governed

by the laws of the Netherlands, without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the Netherlands for any and all disputes, claims and actions arising from or in connection with the NAVTEQ Data provided to you hereunder.

(b) For North American NAVTEQ Data and other non-European Union NAVTEQ Data

The above terms and conditions shall be governed by the laws of Illinois, without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of Illinois for any and all disputes, claims and actions arising from or in connection with the NAVTEQ Data provided to you hereunder.

The above terms and conditions shall be governed by the laws of Kansas, without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of Kansas for any

and all disputes, claims and actions arising from or in connection with the Data provided to you hereunder.

Government end users. If the End User is an agency, department or other entity of the United States Government, or funded in whole or in part by the U.S. Government, then use, duplication, reproduction, release, modification, disclosure or transfer of the Product and accompanying documentation is subject to restrictions as set forth in DFARS 252.227-7014(a)(1) (JUN 1995) (DOD commercial computer software definition), DFARS

27.7202-1 (DOD policy on commercial computer software), FAR 52.227-19 (JUN 1987) (commercial computer software clause for civilian agencies), DFARS 252.227-7015 (NOV 1995) (DOD technical data – commercial items clause); FAR 52.227-14 Alternates I, II and III (JUN 1987) (civilian agency technical data and non-commercial computer software clause); and/or FAR 12.211 and FAR 12.212 (commercial item acquisitions), as applicable. In case of conflict between any of the FAR and DFARS provisions listed herein and this Licence, the construction that provides greater limitations on the Government’s rights shall control. The contractor/manufacturer is Garmin International, Inc., 1200 East 151st Street, Olathe, KS 66062, USA and NAVTEQ North America LLC, 425 West Randolph Street, Chicago, Illinois 60606 USA.

Garmin® is a trademark of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin.

NAVTEQ is a trademark in the U.S. and other countries. All other company names and trademarks mentioned or referenced in this documentation are the properties of their respective owners. All rights reserved.

DMTI Spatial, Inc. End User License Agreement

The software embedded in your Garmin product is owned by Garmin Ltd. or its subsidiaries (“Garmin”). The third-party postal code data (the “Licensed Product”) embedded in or accompanying your Garmin product is owned by DMTI Spatial, Inc. and is licensed to Garmin. Both the software and Licensed Product are protected under copyright laws and international copyright treaties.

THIS is a legal Agreement between you, the end user, and DMTI Spatial, Inc. BY LOADING THE PRODUCT(S) WITH THIS AGREEMENT YOU ARE AGREEING TO BE BOUND BY THE TERMS OF

THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY (within 7 days of purchase) RETURN THE PRODUCTS AND ANY ACCOMPANYING ITEMS (including written materials) TO Garmin INTERNATIONAL, INC. CUSTOMER SERVICE, 1200 EAST 151ST STREET, OLATHE, KANSAS 66062, FOR A REFUND.

DMTI Spatial hereby grants to you a non-exclusive, non-transferable license to use the data contained on the media in this package (the “Licensed Product”) solely for personal non-commercial use or internal use in your business, on a single computer, Pocket PC, or Palm device in conjunction with Garmin software, and with compatible Garmin products that you personally own. Your use of the data is subject to the following terms and conditions:

You acknowledge that the Licensed Product(s) belong to DMTI Spatial and its third party supplier, and that the Licensed Product(s) are copyrighted. Unauthorized copying of the Licensed Product(s), is expressly forbidden and you may be held legally responsible for copyright infringement which is caused or encouraged by your failure to abide by the terms of this agreement. You may make one archival copy of the Licensed Product(s), solely for your own use, subject to the following restrictions: (1) The archival copy must be treated in the same way as the original copy; (2) No copy may be used while any other copy is in use. If you make an archival copy of the Licensed Product(s), you must include on it the copyright notice that is on the original media.

You may not reproduce, sell, rent, lease, loan, distribute or sublicense the Licensed Product(s) or otherwise transfer the Licensed Product(s) to any third party, use the Licensed Product for commercial purposes except for internal use in your business, decompile, disassemble, reverseengineer the Licensed Product(s), or use the Licensed Product to create any derived product for any of these prohibited purposes. You may not place the Licensed Product(s) on the Internet without a prior written agreement with DMTI Spatial.

In no event shall DMTI Spatial or its third party supplier(s) be liable to you or your organization for any indirect damages including any lost profits, lost savings, interruption of business, loss of business opportunities or other incidental or consequential damages, arising out of your possession, use of, or inability to use the Licensed Product(s), even if DMTI Spatial, its third party supplier(s), or any authorized dealer, has been advised of the possibility of the damages, or for any claim by any other party. In no event shall DMTI Spatial have any

English 7

End-User License Agreements

liability for damage in excess of the license fee paid for the Licensed Product(s).

You shall indemnify and hold DMTI Spatial, its third party supplier(s) and their officers, employees and agents, harmless from and against any claim, demand or action, irrespective of the nature of the claim, demand or action, alleging loss, costs, damages, expenses, or injury (including injury from death) resulting from your authorized or unauthorized, use, possession, modification, or alteration of the Licensed Product(s).

THE LICENSED PRODUCT(S) AND THE ASSOCIATED WRITTEN MATERIALS IN CONNECTION THEREWITH ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO WARRANTIES OF EFFECTIVENESS, COMPLETENESS, ACCURACY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LICENSED PRODUCT(S) IS WITH YOU, THE END USER. NO ORAL OR WRITTEN ADVICE GIVEN BY DMTI SPATIAL OR ITS DEALERS, DISTRIBUTORS, AGENTS OR EMPLOYEES CREATES A WARRANTY OR IN NAY WAY INCREASES DMTI SPATIAL’S LIABILITY AND YOU MAY NOT RELY ON ANY SUCH INFORMATION OR ADVICE.

No statement or recommendation made or assistance given by DMTI Spatial or by its representatives or employees shall constitute a waiver by DMTI Spatial or any of the provisions herein. Nor does or will DMTI Spatial warrant any services it may provide in connection with the use of the Licensed product(s), to include any assistance, training, or other consultation with you.

This license is effective until terminated. This license will terminate automatically without notice from DMTI Spatial if you fail to comply with any provision of this License Agreement. Upon termination, you shall destroy or return the Licensed Product(s) including any written materials and all copies of the Licensed Product(s) and any written materials in connection therewith have been destroyed or returned to DMTI Spatial.

This Agreement shall be governed by the laws of the Province of Ontario.

DMTI Spatial is an authorized user and distributor of selected Statistics Canada Computer files under Licensing Agreement 6230.

Digital Topographic Data produced under license

8 GPS Navigation Instruction Manual

from Her Majesty the Queen in Right of Canada, with permission of Natural Resources Canada.

NAVTEQ Traffic™ End User License Agreement

Your Garmin product may be equipped to receive traffic data. If it is so equipped, the following terms and conditions apply to your use of your Garmin product.

NAVTEQ North America LLC and/or its affiliates including Traffic.com (“NAVTEQ”) holds the rights to the traffic event data (“Traffic Data”) and, if you receive RDS/TMC or HD RadioTM Traffic Data, the RDS/TMC or HD Radio networks through which it is delivered to your Garmin product. By subscribing to, receiving or otherwise accessing the Traffic Data, you acknowledge that you have read this Agreement, that you understand it, that your agree to be bound by the terms and conditions of this Agreement, and that you are at least 18 years of age. If you do not agree to the terms and conditions of this Agreement, decline the subscription or, if the subscription is bundled as part of your Garmin product, return the product within 7 days for a full refund to the dealer from which you purchased the product.

You agree to use the Traffic Data together with your Garmin product solely for personal, noncommercial purposes, and not for service bureau, time-sharing or other similar purposes. You may not modify, copy, scan, decompile, disassemble or reverse engineer any portion of the Traffic Data, or use any other method to reproduce, duplicate, republish, transmit, or distribute in any way any portion of the Traffic Data. You agree to indemnify, defend, and hold harmless NAVTEQ (and its affiliates) and Garmin Ltd. (and its subsidiaries) against any and all claims, damages, costs, or other expenses that arise directly or indirectly out of (a) your unauthorized use of the Traffic Data or the RDS/TMC or HD Radio networks, (b) your violation of this Agreement, and/or (c) any unauthorized or unlawful activities by you in connection herewith.

The Traffic Data is informational only. You assume all risk of use. NAVTEQ (and its affiliates), Garmin Ltd. (and its subsidiaries), and their suppliers make no representations about content, traffic and road conditions, route usability, or speed.

The Traffic Data is provided to you “as is,” and you agree to use it at your own risk. NAVTEQ (and its affiliates) and Garmin Ltd. (and its subsidiaries) make no warranty of fitness or compatibility of the Traffic Data with the Garmin product and no warranty that the Traffic Data will operate properly as integrated and interfaced with the

Garmin product. In addition, NAVTEQ (and its affiliates) and Garmin Ltd. (and its subsidiaries) make no warranty with regard to the reliability, accuracy, exhaustiveness, and completeness of the Traffic Data, which may contain inaccuracies and/or errors from time to time. To the maximum extent permitted by applicable law, any and all warranties of any kind whatsoever with regard to the Traffic Data are hereby expressly waived and excluded, including, but not limited to, those of merchantability, fitness for a particular purpose, accuracy or completeness of the Traffic Data, and/ or a lack of viruses.

NAVTEQ (and its affiliates), Garmin Ltd. (and its subsidiaries), and their suppliers disclaim all liability for any loss, injury, or damage resulting from use of or inability to use the Garmin product and the Traffic Data as a result of weather difficulties, the destruction of transmitters and/or broadcasting infrastructures, a natural disaster, and/or a lack of reliability, completeness, or accuracy of the Traffic Data. In no event shall NAVTEQ (and its affiliates), Garmin Ltd. (and its subsidiaries), and their suppliers be liable to you or any other party for any compensatory, direct, indirect, incidental, special, or consequential damages (including, without limitation, indirect, direct, special, punitive, or exemplary damages for loss of business, loss of profits, business interruption, or loss of business information) arising out of the use of or inability to use the Garmin product or the Traffic Data, even if NAVTEQ or Garmin have been advised of the possibility of such damages.

Traffic. If you purchase or your Garmin product is pre-loaded with “lifetime” or “one-time” traffic, you will receive Traffic Data for the useful life of your Garmin traffic receiver (as long as you own a compatible Garmin GPS) or as long as Garmin receives Traffic Data from its third party content supplier, whichever is shorter. Garmin may terminate your traffic subscription immediately if you violate any of the terms of this Agreement. Your traffic subscription may not be transferred to another person or another Garmin product.

Governing Law. The above terms and conditions shall be governed by the laws of the State of Illinois, without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the State of Illinois for any and all disputes, claims and actions arising from or in connection with the Traffic Data provided to you hereunder.

Government End Users. If the Traffic Data is being acquired by or on behalf of the United

States government or any other entity seeking or applying rights similar to those customarily claimed by the United States government, this Data is a “commercial item” as that term is defined at 48 C.F.R. (“FAR”) 2.101, is licensed in accordance with this Agreement, and the Traffic Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following “Notice of Use,” and shall be treated in accordance with such Notice:

Notice of Use

Contractor (Manufacturer/ Supplier) Name: NAVTEQ Contractor (Manufacturer/supplier) Address: 425 West

Randolph Street, Chicago, Illinois 60606 This Data is a commercial item as defined in FAR 2.101

and is subject to the NAVTEQ Traffic™ End User License Agreement under which this Data was provided.

If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify NAVTEQ prior to seeking additional or alternative rights in the Traffic Data.

HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and "Arc" logos are proprietary trademarks of iBiquity Digital Corp.

Garmin® is a trademark of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. This trademark may not be used without the express permission of Garmin. All other company names and trademarks mentioned or referenced in this documentation are the properties of their respective owners. All rights reserved.

English 9

Getting Started

The first time you use your Kenwood Navigation System, you need to set up your system. The Help menu provides additional information.

WARNING

See "Safety Precautions and Important Information" in the Quick Start Guide for product warnings and other important information.

⁄

• The screenshots shown in this manual may not exactly match the screens on your navigation system. The images used in this manual are intended for reference only.

Using the Navigation System

For complete audio system information, see the other Kenwood system manuals.

DNX7190HD

➊

➋

Touch to access the navigation system.

➊ ➋

When navigating, this displays Kenwood

audio. When using audio, this displays navigation information.

Help When You Need It

Touch Tools > Help to get more information about using your navigation system. Touch a category to view information about a topic.

1 Touch Tools > Help.

2 To search the Help topics for a keyword,

touch Search.

⁄

• The hands-free phone feature is only available if your mobile phone has Bluetooth® wireless technology and has been paired to the navigation system. See the other Kenwood manuals and your phone manual for setup and pairing instructions.

10 GPS Navigation Instruction Manual

Find It and Go!

The Where To? page provides several different categories for you to use when searching for addresses, cities, and other locations. The detailed map loaded in your navigation system contains millions of points of interest, such as restaurants, hotels, and auto services.

Finding a Restaurant

1 Touch Where To?.

2 Select a category.

3 Select a subcategory.

5 Select a place.

6 Select Press for More to see the Review

page.

7 Touch Go!.

4 Select a type.

English 11

Find It and Go!

Following Your Route

As you travel, your navigation system guides you to your destination with voice prompts, arrows on the map, and directions at the top of the map. The upper-left corner indicates the distance to your next maneuver. If you depart from the original route, your navigation system recalculates the route and provides new directions.

Your route is marked with a highlighted line.

Follow the arrows.

Adding a Via Point

You can add a stop (Via Point) to your route. The navigation system gives you directions to the stop and to your final destination.

1 With a route active, touch

Where To?.

2 Search for the extra stop.

3 Touch Go!.

4 Touch Add As a Via Point to add this stop

before your destination.

If you want to add more than one stop to the route, edit the current route. See page 19.

(back icon) >

Taking a Detour

If a road on your route is closed, you can take a detour.

1 With a route active, touch .

2 Touch Detour.

The navigation system attempts to get you back on your original route as quickly as possible. If the route you are currently taking is the only reasonable option, the navigation system might not calculate a detour.

A checkered flag marks your destination.

12 GPS Navigation Instruction Manual

Stopping the Route

1 With a route active, touch .

2 Touch Stop.

Where To?

The Where To? page provides several different categories you can use to search for locations.

➎

Searching Near Another Location

Your navigation system automatically searches for places near your current location.

1 Touch Where To? > Near.

2 Select an option:

• Where I Am Now—search near your current location.

• A Different City—search near the city you enter.

• A Recent Destination—search near a recent

destination.

• A Favorite Destination—search near a favorite

destination.

• My Current Route—search along your route.

• My Destination—search near your current destination.

3 Touch OK.

Go! Page Options

Touch an item in the search results list to view the Go! page.

➊

➋ ➌

➎

➏ ➐

➍

Touch to call this location, if a mobile

➊

phone with Bluetooth wireless technology is connected.

Touch to save this location to your Favorites.

➋

Touch to create a turn-by-turn route to this

➌

location.

Touch to return to the previous page.

➍

Touch to view more information about the

location.

Touch to switch between a 3D

➏

(three-dimensional) map and a 2D (twodimensional) map.

➐

Touch to rotate the viewing angle in

3D view.

Finding an Address

The steps to find an address can vary depending on the maps that are loaded on your navigation system. Not all map data provides postal-code searching.

1 Touch Where To? > Address.

2 Touch Change State/Country, if necessary.

3 Touch Search All.

Touch Spell City. Enter the city using the

keyboard, and touch Done. Select the city.

4 Enter the number of the address, and

touch Done.

5 Enter the street name, and touch Done.

6 Select the correct street in the list, if

necessary.

7 Touch the address, if necessary.

English 13

Where To?

Finding a Place by Spelling the Name

If you know the name of the location you are looking for, you can spell it using the on-screen keyboard. You can also enter letters contained in the name to narrow the search.

1 Touch Where To? > Points of Interest >

Spell Name.

2 Using the on-screen keyboard, enter

letters in the name.

3 Touch Done.

Using the On-Screen Keyboard

When an on-screen keyboard appears, touch a letter or a number to enter it.

• Touch to add a space.

• Touch

• Touch &?% to enter special characters.

and to move the cursor. to delete the character, or touch and hold to

delete the entire entry.

to change the keyboard language mode.

Finding Places in a Different Area

You can search for locations in a different area, such as a different city or near your destination.

1 From the subcategories list, touch Near.

2 Select one of the search options.

Narrowing Your Search

To narrow your search, you can search near a different city.

1 Touch Where To? > Near.

2 Touch A Different City.

3 Enter part of the name, and touch Done.

14 GPS Navigation Instruction Manual

Favorites

You can save all of your favorite places in Favorites. You can also save your home location in Favorites.

Saving Places You Find

1 After you have found a place you want to

save, touch Save on the Go! page.

2 Touch OK. The place is saved in Favorites.

Saving Your Current Location

1 Touch View Map.

2 Touch the vehicle icon

3 Touch Save Location.

Setting a Home Location

You can set a Home Location for the place you return to most often.

1 Touch Where To? > Go Home.

2 Select an option.

• Enter My Address—enter an address for the location

using the on-screen keyboard.

• Use My current location—set your current location as

your Home Location.

• Choose from Recently Found—select a location from

your recently found locations.

After you set your Home Location, touch Tools > My Data > Set Home Location.

English 15

Favorites

Viewing Saved Places

1 Touch Where To?.

2 Touch Favorites.

3 Touch a category.

Editing Saved Places

1 Touch Where To? > Favorites.

2 Touch the location you want to edit.

3 Touch Press for More.

4 Touch Edit.

5 Touch the item you want to edit.

• Change Name—enter a new name for the location using the on-screen keyboard.

• Change Map Symbol—touch a new symbol.

• Change Phone Number—enter a phone number.

• Change Categories—create or change the category in which this location is saved.

Deleting a Favorite

1 Touch Tools > My Data.

2 Touch Delete Favorite(s).

3 Select the Favorite to delete.

4 Touch Delete.

16 GPS Navigation Instruction Manual

The Main Pages

This section provides details about the Map page, the Trip Computer, myTrends™, the Turn List, Lane assist, and the GPS Info page.

Viewing the Map Page

Touch View Map to open the map. Touch an area of the map to see additional information, as shown below. The vehicle icon shows your current location.

➋

➊

➌ ➍

➏ ➐➎

➊ Distance to the next turn. Touch to view

and hear next turn details. Lane assistance also displays in this area.

➋ While navigating a route, touch the text bar

to open the Turn List. See page 18.

➌ Touch to zoom in. ➍ Touch to zoom out. ➎ Touch to change the data field. ➏ Touch to view the Where Am I? page. ➐ Touch the Speed data field to open the Trip

Computer.

⁄

• A speed limit icon may appear as you travel on major roadways. This icon displays the current speed limit of the roadway.

Using myTrends

The myTrends™ feature senses when you are driving to a common destination and displays the destination and estimated time of travel in the navigation bar on the map.

3 Drive to the Favorite several times.

4 When myTrends information appears in

the navigation bar, touch it to view route information.

⁄

• myTrends does not work when you first begin using your navigation system. To effectively use the myTrends feature, your frequent destinations must be marked as favorites, and a regular pattern of driving habits must be established with three days of regular driving usage.

Trip Computer

The Trip Computer displays your current speed and provides helpful statistics about your trip. To view the Trip Computer, touch the Speed field on the Map page.

Resetting Trip Information

If you want current and up-to-date trip information, reset the trip information before beginning a trip.

From the Trip Computer, touch Reset to

reset the information.

1 From the Main page, touch Settings >

Navigation > myTrends > Enabled.

2 Save a common destination, like your

home or workplace, as a Favorite (page

15).

English 17

The Main Pages

Turn List Page

When you are navigating a route, the Turn List page displays turn-by-turn instructions for your entire route and the distance between turns. Touch the text bar on the top of the Map page to view the Turn List page. Touch a turn on the list to view the Next Turn page for that turn. Touch

Show Map to view the entire route on the map.

Next Turn Page

When you are navigating a route, the Next Turn page shows the turn on the map and the distance and time left before you reach the turn. To view an upcoming turn on the map, touch the upperleft corner of the Map page, or touch any turn on the Turn List page.

About Junction View

When available, the Lane Assist page may display a view of the upcoming junction and in which lane you should be driving. You must be navigating a route before you can view the junction.

⁄

• You can also view junctions from the Turn List page.

• When available, junctions appear on a split screen.

• The Lane Assist page with Junction View is not available on the DNX6190HD, DNX5190HD, and DNX5060EX.

GPS Info Page

From the Nav Menu page, touch in the upper left corner to view the GPS Info page.

➊

➋

18 GPS Navigation Instruction Manual

➊ Sky view ➋ Satellite signal-strength bars

The sky view shows the satellites you are receiving. The satellite signal-strength bars indicate the strength of each satellite you are receiving. A solid bar indicates that the GPS satellite is ready for use.

Creating and Editing Routes

This section describes how to create and customize your routes.

Creating a New Custom Route

1 Touch Where To? (or Tools) > Routes > New.

2 Touch Add New Start Point.

3 Find a location for your starting point, and

touch Select.

4 Touch Add New End Point.

5 Find a location for your ending point, and

touch Select.

6 Touch + to add another location to your

route. Touch – to remove a location.

7 Touch Next to calculate your route and

view it on the map. Touch Save to save your changes.

Editing Custom Routes

1 Touch Where To? (or Tools) > Routes.

2 Select the route you want to edit.

3 Touch Edit.

4 Touch the item to edit.

• Change Name—enter a new name.

• Add or Remove Points—add or remove points from

the route.

• Manually Reorder Points—change the order of points

along your route.

• Optimally Reorder Points—automatically order the

points.

• Recalculate—recalculate the route.

• Delete—remove this route.

Your changes are saved automatically when you exit any of the route edit pages.

Saving and Modifying the Active Route

1 Touch Where To? (or Tools) > Routes.

2 Touch Active Route.

3 Touch Add or Remove Points.

4 Add, remove, or reorder the points.

5 Touch Next.

6 Touch Save.

Navigating a Saved Route

1 From the Main page, touch Where To? (or

Tools) > Routes.

2 Touch the route you want to navigate, and

touch Go!.

Deleting All Saved Routes

Touch Tools > My Data > Delete Selected

Route(s) > Select All > Delete.

Stopping Your Route

With a route active, touch > Stop.

English 19

Creating and Editing Routes

Adding a Detour to a Route

If a road on your route is closed or congested with traffic, you can take a detour.

1 With a route active on the Main Map,

touch

2 Touch Detour.

Taking a Detour Around Specified Areas

Before you can take a detour around a specified area, you must enable advanced detours in the Navigation settings (page 24).

You can take a detour for a specified distance along your route or detour around specific roads. This is useful if you encounter construction zones, closed roads, or poor road conditions.

1 While navigating a route, from the main

menu, select Detour.

2 Select an option:

• Select Next 1/2 mile (0.5 km) on Route.

• Select Next 2 miles (2 km) on Route.

• Select Next 5 miles (5 km) on Route.

• Select Detour by Roads on Route, and select a road.

Using Multiple Route Preview

⁄

• See page 24 to enable multiple route preview with Route Preferences.

1 Select a point of interest (page 11).

A map appears with Faster Time, Shorter

Distance, and Less Fuel routes highlighted.

2 Select a route, and touch Go!.

Using trafficTrends

When the trafficTrends™ feature is enabled, your navigation system uses historic traffic information to calculate more-efficient routes. Different routes may be calculated based on traffic trends for the day of the week or based on the time of day.

Touch Settings > Navigation >

trafficTrends > Enabled.

Adding a Custom Avoidance

Custom avoidances allow you to avoid specific areas and sections of road. You can enable and disable custom avoidances as needed.

1 Select Settings > Navigation > Custom

Avoidances.

2 If necessary, select Add New Custom

Avoidance.

3 Select Add Avoid Area or Add Avoid Road.

4 Follow the on-screen instructions.

20 GPS Navigation Instruction Manual

Using ecoRoute™

The ecoRoute feature calculates your vehicle fuel economy, carbon footprint, and the fuel price of navigating to a destination, and offers tools for improving fuel efficiency.

About ecoRoute

The data provided by the ecoRoute feature is only an estimate. The data is not actually read from your vehicle. To receive more-accurate fuel reports for your specific vehicle and driving habits, calibrate the fuel economy.

Creating a Vehicle Profile

The vehicle profile provides a basis for ecoRoute to calculate your vehicle fuel economy.

1 Touch Tools > ecoRoute.

2 Enter the required information, and touch

Next.

3 Touch Done.

Resetting Your Vehicle Profile

1 Touch Tools > ecoRoute > Vehicle Profile.

2 Touch Reset.

Calibrating Fuel Economy

Use this feature when you refuel to maintain an accurate fuel economy.

1 Touch Tools > ecoRoute > At the Pump.

4 Enter the distance you have traveled since

the last fill up.

5 Touch Next.

Taking the ecoChallenge

The ecoChallenge helps you maximize your fuel economy by scoring your driving habits. The higher your ecoChallenge scores, the more fuel you save. The ecoChallenge collects data and calculates a score whenever you are moving.

The ecoChallenge score on the map.

Touch Tools > ecoRoute > ecoChallenge.

icon displays your current

⁄

• To view detailed ecoChallenge scores, touch the icon. The leaf color on the driving challenge icon changes

depending on your performance in the challenge.

About ecoChallenge Scores

• Overall—a combination of the speed, acceleration, and

braking score.

• Speed—gain points for driving at your vehicle optimal

speed for conserving fuel (45–60 mph for most vehicles).

• Acceleration—gain points for smooth acceleration; lose

points for rapid acceleration.

• Braking—gain points for smooth braking; lose points for

hard braking.

• Fuel Economy—Gain points for driving at the optimal

fuel economy for your vehicle.

2 Enter the current fuel price.

3 Enter how much fuel your vehicle has used

since the last fill up.

English 21

Using ecoRoute

Hiding Your ecoChallenge Score

1 Touch Tools > ecoRoute > ecoChallenge.

2 Touch Settings > Hide.

3 Touch OK.

Resetting Your Score

You can restart your current ecoChallenge.

While viewing the current ecoChallenge

details, touch Reset > Yes.

Viewing Your Fuel Economy

1 Touch Tools > ecoRoute > Fuel Economy.

The graph along the bottom shows your

average fuel economy for a period of driving time.

2 Touch a section of the graph to zoom in.

3 Touch Reset to clear the fuel economy

data.

Viewing a Mileage Report

You can view the 20 most-recent mileage reports.

1 Touch Tools > ecoRoute > Mileage Report.

2 Select a report.

• To reset all report data, touch Reset.

Exporting a Mileage Report

1 Connect a USB mass storage device to your

Kenwood unit.

2 Touch Tools > ecoRoute > Mileage Report.

3 Touch Export to export and save the

reports to the USB mass storage device.

Setting Routes that Use Less Fuel

1 Touch Settings > Navigation > Route

Preference.

2 Select Less Fuel.

About the Mileage Report

A mileage report tracks the distance, the time, the average fuel economy, and the fuel cost of navigating to a destination.

A mileage report is created for every route that you drive. If you stop a route on the device, a mileage report is created for the distance you traveled.

Mileage reports are created automatically when you stop or complete routes.

22 GPS Navigation Instruction Manual

Traffic Information

Using the built-in FM traffic receiver, the navigation system can receive and use traffic information. When a traffic message is received, you can see the event on the map and change your route to avoid the traffic incident. The DNX5190 / DNX5060EX does not have an FM traffic receiver. Traffic information is not available in all areas.

Understanding FM TMC Traffic

FM TMC traffic receivers receive traffic information that is broadcast over the FM Radio Data System. The FM TMC subscription activates automatically after your navigation system acquires satellite signals while receiving traffic signals from the service provider. You can add other FM TMC subscriptions at any time. Check the Garmin Web site at www.garmin.com/kenwood for other available services.

Traffic in Your Area

When you are receiving traffic information, a traffic icon appears in the upper-left corner of the Map page. The traffic icon changes color to indicate the severity of traffic conditions on your route or on the road you are currently traveling.

Color Description Meaning

Green Low severity Traffic is flowing

normally.

Yellow Medium

severity

Red High severity Traffic is heavily

Gray No data Traffic data has

Traffic is slightly congested.

congested or stopped.

not updated.

If a non-severe traffic delay occurs on your route, the traffic icon shows how much time the delay has added to your route. This time is already included in your estimated arrival time.

To manually avoid traffic on your route:

1 On the Map page, touch the traffic icon.

2 Touch Traffic On Route.

3 Touch the arrows to view other traffic

delays on your route, if necessary.

4 Touch Avoid to avoid the traffic delay.

Viewing the Traffic Map

The traffic map shows color-coded traffic flow and delays on nearby roads.

1 On the Map page, touch the traffic icon.

2 Touch Show Traffic Map to view the traffic

incidents on a map.

⁄

• To return to the normal map from the traffic map, touch

the traffic icon, and touch Show Normal Map.

Viewing Traffic Delays

Traffic on Your Route

When calculating your route, the navigation system examines the current traffic and automatically optimizes the route for the shortest time. If a severe traffic delay occurs on your route while you are navigating, the navigation system automatically recalculates the route. You might still be routed through traffic if no better alternative routes exist.

1 On the Map page, touch the traffic icon.

2 Touch Traffic Search to view a list of traffic

delays.

3 Touch an item in the list to view the delay

on a map and details about the delay. If there is more than one delay, touch the arrows to view the additional delays.

English 23

Customizing the Settings

You can customize the settings of your GPS navigation system.

Customizing the Navigation System

1 Touch Settings.

2 Touch the setting you want to change.

3 Touch the button below the setting name

to change it.

Changing the System Settings

Touch Settings > System.

• GPS Simulator—enable the simulator to turn off the

GPS mode and simulate navigation.

• Units—change the units of measure.

• Keyboard Layout—select keyboard layout.

• About—display the software version number, the unit

number, and the unit ID number.

• Restore—restore the original system settings.

Changing the Map Settings

Touch Settings > Map.

• Map Detail—adjust the amount of detail shown on the

map. More detail may cause the map to redraw slower.

• Map View—select a map perspective.

• Vehicle—touch Change to change the icon used to

display your position on the map. Touch the icon you want to use, and touch OK.

• Trip Log—show or hide the log of your travels. To clear your trip log, touch Tools > My Data > Clear Trip Log. See page 27 to save trip logs.

• Map Data Layout—changes the layout of the main map.

• Map Info—view the maps loaded on your navigation system and their version. Touch a map to enable (check mark) or disable (no check mark) that map.

• Restore—restore the original map settings.

Changing the Navigation Settings

Touch Settings > Navigation.

• Route Preference—select a preference for calculating

your route.

• Avoidances—select the road types you want to avoid or

you would prefer to use on your routes.

• Restore—restore the original navigation settings.

• Voice Prompts—turn voice prompts on or off.

• Custom Avoidance—select a specific area on a specific

road to avoid.

• Advanced Detours—select a specific section of your

trip to detour around while navigating.

• myTrends—senses when you are driving to a common,

saved destination and displays the route information.

• trafficTrends—records historic traffic data to calculate

more-efficient routes.

Adjusting the Display Settings

Touch Settings > Display.

• Color Mode—select Day for a light background, Night for a dark background, or Auto to automatically switch between the two.

• Restore—restore the original display settings.

Route Preferences

From the main menu, touch Settings >

Navigation > Route Preference.

The route calculation is based on road speeds and vehicle acceleration data for a given route.

• Faster Time—calculates routes that are faster to drive but can be longer in distance.

• Shorter Distance—calculates routes that are shorter in distance but can take more time to drive.

• Less Fuel—calculates routes that could use less fuel than other routes.

• Prompted—prompts you to select a route calculation mode before navigating (multiple route preview, page

20).

• Off Road—calculates a direct line from your location to your destination.

24 GPS Navigation Instruction Manual

Updating the Time Settings

Touch Settings > Time.

• Time Format—select a 12-hour, 24-hour, or UTC time

format.

• Current Time—select Automatic to update the time

automatically. When Automatic is not selected, you can adjust the time in 15-minute increments.

• Restore—restore the original time settings.

Setting the Languages

Touch Settings > Language.

• Voice Language—select a voice.

• Keyboard—select the keyboard for your language. You

can also change the keyboard language mode from any keyboard by touching the Mode button.

• Restore—restore the original languages.

Adding Security

Touch Settings > Security.

• Safe Mode—turn safe mode on or off. When your

vehicle is moving, safe mode disables all functions that require significant operator attention and could become a distraction while driving.

• Restore—restore the original security settings.

English 25

Appendix

This appendix provides additional information about your navigation system, such as how to update the software and map data.

Updating the Software

To update the navigation system software, you must have a USB mass storage device and an Internet connection.

1 Go to www.garmin.com/Kenwood.

2 Find your model and select Software

Updates > Download.

3 Read and accept the terms of the Software

License Agreement.

4 Follow the instructions on the Web site to

complete the installation of the software update.

Updating the Map Data

You can purchase updated map data from Garmin or ask your Kenwood dealer or Kenwood service center for details.

1 Go to www.garmin.com/Kenwood.

2 Select Order Map Updates for your

Kenwood unit.

Safety Cameras

WARNING

Garmin and Kenwood are not responsible for the accuracy of, or the consequences of using, a safety camera database.

Safety camera information is available in some locations. Go to http://my.garmin.com for availability. For these locations, the navigation system includes the locations of hundreds of safety cameras. Your navigation system alerts you when you are approaching a safety camera and can warn you if you are driving too fast. The data is updated at least weekly, so you always have access to the most up-to-date information.

You can purchase a new region or extend an existing subscription at any time. Each region that you purchase has an expiration date.

3 Follow the Web site instructions to update

your map.

26 GPS Navigation Instruction Manual

+ 58 hidden pages