KB Electronics KBDA Series Connection Diagram
General Connection Diagram
Drive is set for Reverse Direction.
D-1015
4-Digit Display
Drive is in Stop Mode.
Drive is set for Forward Direction.
Drive is in Overload.
Drive is in Jog Operation
or Remote Signal Operation.
Up Key: Increases Output Frequency, Set Frequency,
Function Number Value, and Code Setting.
Starts or Stops the drive.
Changes motor direction.
Down Key: Decreases Output Frequency, Set Frequency,
Function Number Value, and Code Setting.
Potentiometer: Sets Drive Output Frequency.
TB2
NC
COM
NO
Multi-Function
Output Relay
CON1
Indicates JOG-LCL/REM Key is set for
Local/Remote Signal Operation.
Drive is in Program Mode.
Drive Frequency displayed.
Left Shift / Reset Key: Moves the changeable
digit or Resets the drive after a fault has cleared.
Used to enter the Program Mode
or Display Mode.
Displays or enters a Function Value or Code Setting.
Sets the drive to Jog Mode or changes between
Local (Keypad) or Remote Signal Operation.
TB1
U V W
MOT OR
KB ELECTRONICS, INC.
(954) 346-4900 • Fax (954) 346-3377
Outside Florida Call Toll Free (800) 221-6570
info@kbelectronics.com • www.kbelectronics.com
Motor
Represented by:
L2
L1
AC LINE
AC Line Input
(varies by model)
L3
Ground (Earth)Ground (Earth)
A42151 – Rev. G – 12/2012
Loading...