Kawai CN22 User Manual

5 (1)

Owner’s Manual

PARTNAMES FUNCTIONSAND

1

 

STARTED

2

GETTING

 

FUNCTION

3

LESSON

 

RECORDER

4

 

MODE

 

FUNCTION

5

 

APPENDICES

6

 

Page

3

THANK YOU FOR PURCHASING A KAWAI DIGITAL PIANO!

This KAWAI digital piano is a revolutionary new keyboard instrument, combining the latest in electronic advances with traditional craftsmanship inherited from KAWAI’s many years of experience building fine pianos. The CN22 keyboard provides the touch response and full dynamic range required for a superb performance of piano, harpsichord, organ, and other instruments. The CN22 digital piano’s Lesson function helps performers to practice the piano with a collection of etudes from Czerny and Burgmüller, or songs from Alfred’s Basic Piano Library lesson book (USA, Canada, Australia and UK only).

In addition, the CN22 digital piano is equipped with industry standard MIDI (Musical Instrument Digital Interface), allowing a number of other electronic instruments to be controlled and played simultaneously, creating a range of musical possibilities.

This Owner’s Manual contains valuable information to help performers make full use of the instrument’s varied capabilities. Please read all sections carefully and keep this manual handy for future reference.

Table of Contents

¡ Important Safety Instructions..............

4

1. PART NAMES AND FUNCTIONS ......

8

CONTROL PANEL .......................................................

8

USING THE ENCLOSED FUNCTION LABEL .............

8

PEDALS .......................................................................

9

2. GETTING STARTED.........................

10

1) BASIC OPERATIONS.....................................................

10

DEMONSTRATION SONGS ......................................

11

SELECTING A SOUND .............................................

12

2) DUAL ..............................................................................

13

3) FOUR HANDS................................................................

14

4) METRONOME................................................................

15

STARTING THE METRONOME.................................

15

CHANGING THE METRONOME TIME SIGNATURE ...

15

ADJUSTING THE METRONOME TEMPO ................

16

5) CONCERT MAGIC .........................................................

17

SELECTING A SONG................................................

17

LISTENING TO THE SONG.......................................

17

PERFORMING A SONG............................................

18

CONCERT MAGIC SONG TYPES ............................

18

CONCERT MAGIC DEMO MODES...........................

19

3. LESSON FUNCTION........................

20

SELECTING A LESSON SONG FROM THE FIRST

 

SONG BOOK.............................................................

20

SELECTING A LESSON SONG FROM THE SECOND

SONG BOOK.............................................................

20

LISTENING TO A LESSON SONG............................

21

EXITING THE LESSON FUNCTION .........................

21

PRACTICING LEFT AND RIGHT HAND PARTS.......

21

ADJUSTING THE TEMPO OF A LESSON SONG ....

22

4. RECORDER .....................................

23

1) RECORDING A SONG...................................................

23

2) PLAYING BACK A SONG...............................................

24

3) ERASING A SONG ........................................................

24

5. FUNCTION MODE............................

25

1) BASIC OPERATION .......................................................

25

2) TOUCH TYPE.................................................................

26

3) TRANSPOSE..................................................................

26

4) TUNING ..........................................................................

27

5) REVERB.........................................................................

27

6) DAMPER EFFECT .........................................................

28

7) CONCERT MAGIC MODE .............................................

28

8) MIDI CHANNEL SELECT...............................................

29

ABOUT MIDI ..............................................................

29

CN22 MIDI FUNCTIONS ...........................................

29

9) MIDI LOCAL CONTROL ON/OFF ..................................

30

10) MULTI-TIMBRAL MODE ON/OFF ................................

31

11) TRANSMIT MIDI PROGRAM CHANGE.......................

32

6. APPENDICES...................................

33

1) CONNECTING TO OTHER DEVICES ...........................

33

2) ASSEMBLY INSTRUCTIONS.........................................

34

3) CONCERT MAGIC SONG LIST .....................................

36

4) LESSON SONG LIST.....................................................

37

ALFRED’S BASIC PIANO LIBRARY .........................

37

BURGMÜLLER & CZERNY ETUDES .......................

38

5) SPECIFICATIONS ..........................................................

39

6) MIDI IMPLEMENTATION CHART...................................

40

Page

4

Important Safety Instructions

SAVE THESE INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

AVIS : RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

Examples of Picture Symbols

denotes that care should be taken.

The example instructs the user to take care not to allow fingers to be trapped.

denotes a prohibited operation.

The example instructs that disassembly of the product is prohibited.

denotes an operation that should be carried out.

The example instructs the user to remove the power cord plug from the AC outlet.

Read all the instructions before using the product.

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or object have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.

Page

5

WARNING - When using electric products, basic precautions should always be followed, including the following.

WARNING Indicates a potential hazard that could result in death or serious injury if the product is handled incorrectly.

The product should be connected to

120V

230V

240V

● If you are going to use an AC power cord,

an AC outlet of the specified voltage.

make sure that its has the correct plug shape

 

 

 

 

 

 

 

and conforms to the specified power voltage.

 

 

 

 

● Failure to do so may result in fire.

Do not insert or disconnect the power

 

 

 

Doing so may cause electric shock.

cord plug with wet hands.

 

 

 

 

When disconnecting the AC power cord's

 

 

 

● Pulling the AC power cord itself may damage

plug, always hold the plug

 

 

 

the cord, causing a fire, electric shock or

and pull it to remove it.

 

 

 

short-circuit.

The product is not completely disconnected from the

 

● Failure to do so may cause fire in case of

power supply even when the power switch is turned

 

lightning.

off. If the product will not be used for a long time,

 

● Failure to do so may over-heat the product,

unplug the AC power cord from the AC outlet.

 

 

resulting in fire.

Do not use the product in wet areas or areas

 

 

Doing so may cause a short circuit, leading to an

close to water.

 

 

 

electric shock, or a fire.

Do not stand on the product or exert

 

 

 

● Doing so may cause the product to become

excessive force.

 

 

 

deformed or fall over, resulting in breakdown

 

 

 

 

or injury.

When using the headphones, do not

Doing so may result in hearing problems.

listen for long periods of

 

time at high volume levels.

 

Do not disassemble, repair or modify

Doing so may result in product breakdown, electric

the product.

shock or short-circuit.

Always follow the assembly instructions carefully.

Failure to do so may result in damage or an accident.

Do not lean against the keyboard.

Doing so may cause the product to fall over, resulting in injury.

This product may be equipped with a polarized line plug (one blade wider than the other). This is a safety feature.

If you are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the plug.

Page

6

Indicates a potential hazard that could result in injury CAUTION or damage to the product or other property if the

product is handled incorrectly.

Do not use the product in the following areas.

Areas, such as those near windows, where the product is exposed to direct sunlight

Extremely hot areas, such as near a heater

Extremely cold areas, such as outside

Extremely humid areas

Areas where a large amount of sand or dust is present

Areas where the product is exposed to excessive vibrations

Areas where the product is unstable.

Using the product in such areas may result in product breakdown.

Use the product only in moderate climates (not in tropical climates).

Do not place the product near electrical appliances such as TVs and

radios.

Use only the AC adaptor included with this instrument to power the instrument.

When connecting the AC power cord and other cords, take care

not to get them tangled.

Doing so may cause the product to generate noise.

If the product generates noise, move the product sufficiently away from the electrical appliance or connect it to another AC outlet.

Do not use other AC adaptors to power this instrument.

Do not use the included AC adaptor or AC power cord to power other equipment.

Failure to do so may damage them, resulting in fire, electric shock or short-circuit.

It is a good practice to have the instrument near the AC outlet and the power cord plug in a position so that it can readily be disconnected in an emergency because electricity is always charging while the plug is in the AC outlet even in a power switch off condition.

Before connecting cords, make sure that the power to this product

and other devices is turned OFF.

Take care not to allow any foreign matter to enter the product.

OFF Failure to do so may cause breakdown of this product and other devices.

Entry of water, needles or hair pins may result in breakdown or short-circuit.

The product shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the product.

Do not wipe the product with benzene or thinner.

Ensure that the ventilation is not impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc.

Do not drag the product on the floor. Take care not to drop the product.

Doing so may result in discoloration or deformation of the product.

When cleaning the product, put a soft cloth in lukewarm water, squeeze it well, then wipe the product.

Failure to do so may over-heat the product, resulting in fire.

Please lift up the product when moving it. Please note that the product is heavy and must be carried by more than two persons. Dropping the product may result in breakdown.

Do not place naked flame, such as lighted candles on the product.

Page

7

Doing so may cause the illumination to fall over, resulting in fire.

The product should be located so that its location or position does not interfere with its proper ventilation. Ensure a minimum distance of 5cm around the product for sufficient ventilation.

The product should be serviced by qualified service personnel when:

The power supply cord or the plug has been damaged.

Objects have fallen, or liquid has been spilled into the product.

The product has been exposed to rain.

The product does not appear to operate normally or exhibits a marked change in performance.

The product has been dropped, or the enclosure damaged.

Notes on Repair

Should an abnormality occur in the product, immediately turn the power OFF, disconnect the power cord plug, and then contact the shop from which the product was purchased.

CAUTION:

To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION:

Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.

Instruction for AC power cord (U.K.)

Do not plug either terminal of the power cord to the ground of the AC outlet on the wall.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a different electrical circuit from the receiver.

Consult the dealer or an experienced radio/TV technician for help.

Canadian Radio Interference Regulations

This instrument complies with the limits for a class B digital apparatus, pursuant to the Radio Interference Regulations, C.R.C., c. 1374.

An information on Disposal for users

If your product is marked with this recycling symbol it means that, at the end of its life, you must dispose of it separately by taking it to an appropriate collection point.

You should not mix it with general household waste. Disposing of this product correctly will prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.

For further details, please contact your local authority. (European Union only)

Kawai CN22 User Manual

Page

8

PARTNAMES

ANDFUNCTIONS

1

 

1. PART NAMES AND FUNCTIONS

This section explains the locations and functions of the panel sliders and buttons.

CONTROL PANEL

zCONCERT MAGIC

The Concert Magic function allows the CN22 digital piano to be enjoyed by those with little or no experience of playing the piano, providing the correct accompaniment and melody by simply pressing a single key on the keyboard. (Page 17)

zRECORDER

The Recorder function allows a performance to be recorded and played back. (Page 23)

zMETRONOME

T h e M e t r o n o m e f u n c t i o n provides a steady rhythm with which to aid piano practice.

The tempo, time signature, and volume of the metronome can be freely adjusted. (Page 15)

zLESSON

The Lesson function provides access to built-in etudes or Alfred lesson books (USA, Canada, UK, AU only), offering an enjoyable piano learning experience. (Page 20)

zSOUND SELECT

The SOUND SELECT button are used to select the sound that will be heard when playing the CN22 digital piano. (Page 12)

Function Label

USING THE ENCLOSED FUNCTION LABEL

A ‘function label’ is included with the CN22 digital piano. Placing this label at the back of the keyboard will prove useful when selecting different sounds or changing values, such as the metronome time signature.

Position the function label so that the left end, marked ‘CONCERT GRAND (off/-)’ is aligned with the lowest key. The underside of the function label has a slight adhesive, allowing this information to be attached to the CN22 digital piano for greater convenience.

zHEADPHONE JACKS

The PHONES jacks located on the left of the CN22 digital piano, are used to connect stereo headphones to the instrument.

Two pairs of headphones can be connected and used simultaneously.

zPOWER

The POWER button is used to turn the CN22 digital piano on and off. Be sure to turn off the instrument after playing. (Page 10)

zMASTER VOLUME

The MASTER VOLUME slider controls the master volume level of the internal speakers and connected headphones. Move the slider upward to increase the volume, and downward to decrease the volume. (Page 10)

Page

9

PART NAMES AND FUNCTIONS

1

PEDALS

The CN22 digital piano features three pedals—just like a grand piano: Damper, Sostenuto and Soft.

Soft pedal

Damper pedal

Sostenuto pedal

¡ Damper pedal

Sustains the sound after hands are lifted from the keyboard. The damper pedal is also capable of responding to half pedaling.

¡ Sostenuto pedal

Depressing this pedal after playing the keyboard and before releasing the keys sustains the sound of only the keys just played. Any keys that are pressed after the Sostenuto pedal is depressed will not be sustained after the keys are released.

¡ Soft pedal

Depressing this pedal softens the sound and reduces its volume.

Page

10

2. GETTING STARTED

2

STARTED

GETTING

 

1) BASIC OPERATIONS

This section provides the basic procedures for turning the power on and playing the CN22 digital piano.

Step 1

Connect one end of the AC power cable to the CN22 digital piano’s power jack and the other end of the cable Backside of the unit

to a wall AC outlet.

Power cable entry point

Step 2

Press the POWER button to turn on the power.

The LED indicator for the SOUND SELECT button will turn on, and the Concert Grand sound will be selected automatically.

Step 3

Adjust the volume level using the MASTER VOLUME slider.

The MASTER VOLUME slider controls the volume level of the speakers and connected headphones. Set the volume to a comfortable listening level - the middle is often a good starting point.

Step 4

Play the piano.

The sound of a Concert Grand piano will be heard as the keys are pressed.

A different sound can be selected by following the procedures described in ‘SELECTING A SOUND’ (page 12).

DEMONSTRATION SONGS

The internal demonstration songs provide an excellent introduction to the capabilities of the CN22 digital piano. Each preset sound is introduced by a different piece of music, as shown below.

Concert Grand .........

Golliwogg’s cake-walk / Debussy

Concert Grand 2 ......

Valse du Petit Chien / Chopin

Studio Grand ...........

KAWAI original

Modern Piano ..........

KAWAI original

Classic E.Piano .......

KAWAI original

Modern E.Piano.......

KAWAI original

Jazz Organ ..............

KAWAI original

Church Organ ..........

Toccata / Eugene Gigout

Harpsichord .............

French Suite No.6 / Bach

Vibraphone ..............

KAWAI original

String Ensemble ......

Le quattoro stagioni ‘La Primavera’ / Vivaldi

Slow Strings.............

KAWAI original

Choir ........................

KAWAI original

New Age Pad...........

KAWAI original

Atmosphere .............

KAWAI original

KAWAI regret that sheet music for KAWAI original demo songs is not available.

Step 1

Press the CONCERT MAGIC and LESSON buttons simultaneously.

The LED indicators for the CONCERT MAGIC and LESSON buttons will start to flash, and the demo song for the Concert Grand sound will start to play.

When the Concert Grand demo song has finished, another demo song will be selected

Press both buttons

at random. This process will continue until all of the demo songs have been played.

Step 2

While listening to a demo song, press the SOUND SELECT button to skip to the next demo song.

To listen to the demo song for a particular sound, press and hold the SOUND SELECT button, then press one of the lowest 15 keys assigned to the desired sound.

Hold down the button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Grand Concert

2 Grand Concert

Grand Studio

Piano Modern

Piano.E Classic

Piano.E Modern

Organ Jazz

Organ Church

Harpsichord

Vibraphone

Ensemble String

Strings Slow

Choir

Pad Age New

Atmosphere

 

 

 

 

 

 

 

 

 

 

Press a white key

Step 3

To stop the demo, press either the CONCERT MAGIC button or the LESSON button.

The LED indicators for the CONCERT MAGIC and LESSON buttons will turn off,

and the demo song will stop playing.

Page

11

GETTING STARTED

2

Press one of buttons

Page

12

2

STARTED

GETTING

 

SELECTING A SOUND

When power is turned on, the Concert Grand sound will be selected automatically.

There are 15 sound types and three methods to select different sounds.

¡ Method 1

Press the SOUND SELECT button repeatedly to cycle through the 15 sounds until the desired sound is selected.

Power-on

Concert Grand (indicator ON)

When pressed once

 

Concert Grand 2 (indicator flashes)

When pressed twice

 

Studio Grand (indicator flashes)

:

:

:

:

:

:

When pressed 7 times

 

Church Organ (indicator flashes)

:

:

:

:

:

:

When pressed 12 times

 

Choir (indicator flashes)

:

:

:

:

:

:

When pressed 15 times

 

Concert Grand (indicator ON)

¡ Method 2

Press and hold the SOUND SELECT button, then press one of the lowest 15 white keys to select a specific

sound.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use the enclosed ‘function label’

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(page 8) for your convenience.

Hold down the button

2GrandConcert

GrandStudio

PianoModern

Piano.EClassic

Piano.EModern

OrganJazz

OrganChurch

Harpsichord

Vibraphone

EnsembleString

StringsSlow

Choir

PadAgeNew

Atmosphere

 

GrandConcert

Press a white key

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The LED indicator for the SOUND SELECT button will turn on when Concert Grand is selected. When a sound other than Concert Grand is selected, the LED indicator for the SOUND SELECT button will start to flash.

¡Method 3

Press and hold the SOUND SELECT button for more than one second to return to the Concert

Grand sound.

The LED indicator for the SOUND SELECT button will turn on once again.

Page

13

2) DUAL

The DUAL function allows two preset sounds to be layered together, creating a more complex sound. For example, a piano can be layered with strings, or a church organ with a choir sound.

Step 1

Press and hold the SOUND SELECT button, then, from the lowest 15 white keys, press the two keys assigned to the two desired sounds simultaneously.

Hold down the button

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Press two keys

Please refer to the enclosed function label, or the sound allocation diagram on page 12.

¡Example: To layer Concert Grand and Jazz Organ sounds together.

Press and hold the SOUND SELECT button, then press the lowest white key (A) and the 7th key (G)

simultaneously.

Hold down the button

Grand Concert

Organ Jazz

The sound of both a Concert Grand and Jazz Organ will be heard simultaneously as the keys are pressed.

Press the SOUND SELECT button once to reset the sound type to Concert Grand.

GETTING STARTED

2

Loading...
+ 29 hidden pages