SRX210 Services Gateway
Hardware Guide
Published: 2010-10-19
Revision 03
Copyright © 2010, Juniper Networks, Inc.
Juniper Networks, Inc.
1194 North Mathilda Avenue Sunnyvale, California 94089 USA
408-745-2000 www.juniper.net
ThisproductincludestheEnvoySNMPEngine,developedbyEpilogueTechnology,anIntegratedSystemsCompany. Copyright©1986-1997, Epilogue Technology Corporation. All rights reserved. This program and its documentation were developed at private expense, and no part of them is in the public domain.
This product includes memory allocation software developed by Mark Moraes, copyright © 1988, 1989, 1993, University of Toronto.
This product includes FreeBSD software developed by the University of California, Berkeley, and its contributors. All of the documentation and software included in the 4.4BSD and 4.4BSD-Lite Releases is copyrighted by the Regents of the University of California. Copyright © 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994. The Regents of the University of California. All rights reserved.
GateD software copyright © 1995, the Regents of the University. All rights reserved. Gate Daemon was originated and developed through release 3.0 by Cornell University and its collaborators. Gated is based on Kirton’s EGP, UC Berkeley’s routing daemon (routed), and DCN’s HELLO routing protocol. Development of Gated has been supported in part by the National Science Foundation. Portions of the GateD software copyright © 1988, Regents of the University of California. All rights reserved. Portions of the GateD software copyright © 1991, D. L. S. Associates.
This product includes software developed by Maker Communications, Inc., copyright © 1996, 1997, Maker Communications, Inc.
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
SRX210 Services Gateway Hardware Guide
Copyright © 2010, Juniper Networks, Inc.
All rights reserved. Printed in USA.
Revision History
October 2010—Revision 03
The information in this document is current as of the date listed in the revision history.
SOFTWARE LICENSE
The terms and conditions for using this software are described in the software license contained in the acknowledgment to your purchase order or, to the extent applicable, to any reseller agreement or end-user purchase agreement executed between you and Juniper Networks. By using this software, you indicate that you understand and agree to be bound by those terms and conditions.
Generally speaking, the software license restricts the manner in which you are permitted to use the software and may contain prohibitions against certain uses. The software license may state conditions under which the license is automatically terminated. You should consult the license for further details.
For complete product documentation, please see the Juniper Networks Web site at www.juniper.net/techpubs.
ii |
Copyright © 2010, Juniper Networks, Inc. |
END USER LICENSE AGREEMENT
READ THIS END USER LICENSE AGREEMENT (“AGREEMENT”) BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE.
BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TO THE TERMS CONTAINED HEREIN, YOU (AS CUSTOMER OR IF YOU ARE NOT THE CUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TO BINDTHECUSTOMER)CONSENTTOBEBOUNDBYTHISAGREEMENT. IFYOUDONOTORCANNOTAGREETOTHETERMSCONTAINED HEREIN, THEN (A) DO NOT DOWNLOAD, INSTALL, OR USE THE SOFTWARE, AND (B) YOU MAY CONTACT JUNIPER NETWORKS REGARDING LICENSE TERMS.
1.The Parties. The parties to this Agreement are (i) Juniper Networks, Inc. (if the Customer’s principal office is located in the Americas) or JuniperNetworks(Cayman)Limited(iftheCustomer’sprincipalofficeislocatedoutsidetheAmericas)(suchapplicableentitybeingreferred tohereinas“Juniper”),and(ii)thepersonororganizationthatoriginallypurchasedfromJuniperoranauthorizedJuniperresellertheapplicable license(s) for use of the Software (“Customer”) (collectively, the “Parties”).
2.The Software. In this Agreement, “Software” means the program modules and features of the Juniper or Juniper-supplied software, for which Customer has paid the applicable license or support fees to Juniper or an authorized Juniper reseller, or which was embedded by Juniper in equipment which Customer purchased from Juniper or an authorized Juniper reseller. “Software” also includes updates, upgrades and new releases of such software. “Embedded Software” means Software which Juniper has embedded in or loaded onto the Juniper equipment and any updates, upgrades, additions or replacements which are subsequently embedded in or loaded onto the equipment.
3.LicenseGrant. Subjecttopaymentoftheapplicablefeesandthelimitationsandrestrictionssetforthherein,JunipergrantstoCustomer a non-exclusive and non-transferable license, without right to sublicense, to use the Software, in executable form only, subject to the following use restrictions:
a.Customer shall use Embedded Software solely as embedded in, and for execution on, Juniper equipment originally purchased by Customer from Juniper or an authorized Juniper reseller.
b.Customer shall use the Software on a single hardware chassis having a single processing unit, or as many chassis or processing units for which Customer has paid the applicable license fees; provided, however, with respect to the Steel-Belted Radius or Odyssey Access Client software only, Customer shall use such Software on a single computer containing a single physical random access memory space and containing any number of processors. Use of the Steel-Belted Radius or IMS AAA software on multiple computers or virtual machines (e.g., Solaris zones) requires multiple licenses, regardless of whether such computers or virtualizations are physically contained on a single chassis.
c.Product purchase documents, paper or electronic user documentation, and/or the particular licenses purchased by Customer may specifylimitstoCustomer’suseoftheSoftware.Suchlimitsmayrestrictusetoamaximumnumberofseats,registeredendpoints,concurrent users, sessions, calls, connections, subscribers, clusters, nodes, realms, devices, links, ports or transactions, or require the purchase of separate licenses to use particular features, functionalities, services, applications, operations, or capabilities, or provide throughput, performance, configuration, bandwidth, interface, processing, temporal, or geographical limits. In addition, such limits may restrict the use of the Software to managing certain kinds of networks or require the Software to be used only in conjunction with other specific Software. Customer’s use of the Software shall be subject to all such limitations and purchase of all applicable licenses.
d.For any trial copy of the Software, Customer’s right to use the Software expires 30 days after download, installation or use of the Software. Customer may operate the Software after the 30-day trial period only if Customer pays for a license to do so. Customer may not extend or create an additional trial period by re-installing the Software after the 30-day trial period.
e.The Global Enterprise Edition of the Steel-Belted Radius software may be used by Customer only to manage access to Customer’s enterprise network. Specifically, service provider customers are expressly prohibited from using the Global Enterprise Edition of the Steel-Belted Radius software to support any commercial network access services.
The foregoing license is not transferable or assignable by Customer. No license is granted herein to any user who did not originally purchase the applicable license(s) for the Software from Juniper or an authorized Juniper reseller.
4. Use Prohibitions. Notwithstanding the foregoing, the license provided herein does not permit the Customer to, and Customer agrees not to and shall not: (a) modify, unbundle, reverse engineer, or create derivative works based on the Software; (b) make unauthorized copies of the Software (except as necessary for backup purposes); (c) rent, sell, transfer, or grant any rights in and to any copy of the Software,inanyform,toanythirdparty;(d)removeanyproprietarynotices,labels,ormarksonorinanycopyoftheSoftwareoranyproduct in which the Software is embedded; (e) distribute any copy of the Software to any third party, including as may be embedded in Juniper equipmentsoldinthesecondhandmarket;(f)useany‘locked’orkey-restrictedfeature,function,service,application,operation,orcapability without first purchasing the applicable license(s) and obtaining a valid key from Juniper, even if such feature, function, service, application, operation, or capability is enabled without a key; (g) distribute any key for the Software provided by Juniper to any third party; (h) use the
Copyright © 2010, Juniper Networks, Inc. |
iii |
Software in any manner that extends or is broader than the uses purchased by Customer from Juniper or an authorized Juniper reseller; (i) use Embedded Software on non-Juniper equipment; (j) use Embedded Software (or make it available for use) on Juniper equipment that the Customer did not originally purchase from Juniper or an authorized Juniper reseller; (k) disclose the results of testing or benchmarking of the Software to any third party without the prior written consent of Juniper; or (l) use the Software in any manner other than as expressly provided herein.
5.Audit. Customer shall maintain accurate records as necessary to verify compliance with this Agreement. Upon request by Juniper, Customer shall furnish such records to Juniper and certify its compliance with this Agreement.
6.Confidentiality. The Parties agree that aspects of the Software and associated documentation are the confidential property of Juniper. As such, Customer shall exercise all reasonable commercial efforts to maintain the Software and associated documentation in confidence, which at a minimum includes restricting access to the Software to Customer employees and contractors having a need to use the Software for Customer’s internal business purposes.
7.Ownership. Juniper and Juniper’s licensors, respectively, retain ownership of all right, title, and interest (including copyright) in and to the Software, associated documentation, and all copies of the Software. Nothing in this Agreement constitutes a transfer or conveyance of any right, title, or interest in the Software or associated documentation, or a sale of the Software, associated documentation, or copies of the Software.
8.Warranty, Limitation of Liability, Disclaimer of Warranty. The warranty applicable to the Software shall be as set forth in the warranty statementthataccompaniestheSoftware(the“WarrantyStatement”).NothinginthisAgreementshallgiverisetoanyobligationtosupport the Software. Support services may be purchased separately. Any such support shall be governed by a separate, written support services agreement. TO THE MAXIMUM EXTENT PERMITTED BY LAW, JUNIPER SHALL NOT BE LIABLE FOR ANY LOST PROFITS, LOSS OF DATA, ORCOSTSORPROCUREMENTOFSUBSTITUTEGOODSORSERVICES,ORFORANYSPECIAL,INDIRECT,ORCONSEQUENTIALDAMAGES ARISINGOUTOFTHISAGREEMENT,THESOFTWARE,ORANYJUNIPERORJUNIPER-SUPPLIEDSOFTWARE.INNOEVENTSHALLJUNIPER BE LIABLE FOR DAMAGES ARISING FROM UNAUTHORIZED OR IMPROPER USE OF ANY JUNIPER OR JUNIPER-SUPPLIED SOFTWARE.
EXCEPT AS EXPRESSLY PROVIDED IN THE WARRANTY STATEMENT TO THE EXTENT PERMITTED BY LAW, JUNIPER DISCLAIMS ANY AND ALL WARRANTIES IN AND TO THE SOFTWARE (WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE), INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT DOES JUNIPER WARRANT THAT THE SOFTWARE, OR ANY EQUIPMENT OR NETWORK RUNNING THE SOFTWARE, WILL OPERATE WITHOUT ERROR OR INTERRUPTION, OR WILL BE FREE OF VULNERABILITY TO INTRUSION OR ATTACK. In no event shall Juniper’s or its suppliers’ or licensors’ liability to Customer, whether in contract, tort (including negligence), breach of warranty, or otherwise, exceed the price paid by Customer for the Software that gave rise to the claim, or if the Software is embedded in another Juniper product, the price paid by Customer for such other product. Customer acknowledges and agrees that Juniper has set its prices and entered into this Agreement in reliance upon the disclaimers of warranty and the limitations of liability set forth herein, that the same reflect an allocation of risk between the Parties (including the risk that a contract remedy may fail of its essential purpose and cause consequential loss), and that the same form an essential basis of the bargain between the Parties.
9.Termination. Any breach of this Agreement or failure by Customer to pay any applicable fees due shall result in automatic termination of the license granted herein. Upon such termination, Customer shall destroy or return to Juniper all copies of the Software and related documentation in Customer’s possession or control.
10.Taxes. All license fees payable under this agreement are exclusive of tax. Customer shall be responsible for paying Taxes arising from the purchase of the license, or importation or use of the Software. If applicable, valid exemption documentation for each taxing jurisdiction shall be provided to Juniper prior to invoicing, and Customer shall promptly notify Juniper if their exemption is revoked or modified. All payments made by Customer shall be net of any applicable withholding tax. Customer will provide reasonable assistance to Juniper in connection with such withholding taxes by promptly: providing Juniper with valid tax receipts and other required documentation showing Customer’s payment of any withholding taxes; completing appropriate applications that would reduce the amount of withholding tax to be paid; and notifying and assisting Juniper in any audit or tax proceeding related to transactions hereunder. Customer shall comply with all applicable tax laws and regulations, and Customer will promptly pay or reimburse Juniper for all costs and damages related to any liability incurred by Juniper as a result of Customer’s non-compliance or delay with its responsibilities herein. Customer’s obligations under this Section shall survive termination or expiration of this Agreement.
11.Export. Customer agrees to comply with all applicable export laws and restrictions and regulations of any United States and any applicable foreign agency or authority, and not to export or re-export the Software or any direct product thereof in violation of any such restrictions, laws or regulations, or without all necessary approvals. Customer shall be liable for any such violations. The version of the Software supplied to Customer may contain encryption or other capabilities restricting Customer’s ability to export the Software without an export license.
iv |
Copyright © 2010, Juniper Networks, Inc. |
12.Commercial Computer Software. The Software is “commercial computer software” and is provided with restricted rights. Use, duplication, or disclosure by the United States government is subject to restrictions set forth in this Agreement and as provided in DFARS 227.7201 through 227.7202-4, FAR 12.212, FAR 27.405(b)(2), FAR 52.227-19, or FAR 52.227-14(ALT III) as applicable.
13.Interface Information. To the extent required by applicable law, and at Customer's written request, Juniper shall provide Customer with the interface information needed to achieve interoperability between the Software and another independently created program, on payment of applicable fee, if any. Customer shall observe strict obligations of confidentiality with respect to such information and shall use such information in compliance with any applicable terms and conditions upon which Juniper makes such information available.
14.ThirdPartySoftware. Any licensor of Juniper whose software is embedded in the Software and any supplier of Juniper whose products or technology are embedded in (or services are accessed by) the Software shall be a third party beneficiary with respect to this Agreement, and such licensor or vendor shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party software may be provided with the Software and is subject to the accompanying license(s), if any, of its respective owner(s). To the extent portions of the Software are distributed under and subject to open source licenses obligating Juniper to make the source code for such portions publicly available (such as the GNU General Public License (“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper will make such source code portions (including Juniper modifications, as appropriate) available upon request for a period of up to three years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194 N. Mathilda Ave., Sunnyvale, CA 94089, ATTN: General Counsel. You may obtain a copy of the GPL at http://www.gnu.org/licenses/gpl.html, and a copy of the LGPL at http://www.gnu.org/licenses/lgpl.html .
15.Miscellaneous. This Agreement shall be governed by the laws of the State of California without reference to its conflicts of laws principles. The provisions of the U.N. Convention for the International Sale of Goods shall not apply to this Agreement. For any disputes arising under this Agreement, the Parties hereby consent to the personal and exclusive jurisdiction of, and venue in, the state and federal courts within Santa Clara County, California. This Agreement constitutes the entire and sole agreement between Juniper and the Customer with respect to the Software, and supersedes all prior and contemporaneous agreements relating to the Software, whether oral or written (including any inconsistent terms contained in a purchase order), except that the terms of a separate written agreement executed by an authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict with terms contained herein. No modification to this Agreement nor any waiver of any rights hereunder shall be effective unless expressly assented to in writing by the party to be charged. If any portion of this Agreement is held invalid, the Parties agree that such invalidity shall not affect the validity of the remainder of this Agreement. This Agreement and associated documentation has been written in the English language, and the Parties agree that the English version will govern. (For Canada: Les parties aux présentés confirment leur volonté que cette convention de même que tous les documents y compris tout avis qui s'y rattaché, soient redigés en langue anglaise. (Translation: The parties confirm that this Agreement and all related documentation is and will be in the English language)).
Copyright © 2010, Juniper Networks, Inc. |
v |
vi |
Copyright © 2010, Juniper Networks, Inc. |
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Documentation Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
SRX Series Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Obtaining Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Documentation Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Part 1 |
SRX210 Services Gateway Overview |
|
Chapter 1 |
Introduction to the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . |
. 3 |
|
SRX210 Services Gateway Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 3 |
|
About the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 3 |
|
SRX210 Services Gateway Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 3 |
|
Accessing the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 4 |
|
SRX210 Services Gateway Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 4 |
Chapter 2 |
SRX210 Services Gateway Hardware Components and Specifications . . . |
. 7 |
|
SRX210 Services Gateway Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 7 |
|
SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, |
|
|
High Memory, and PoE Versions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
10 |
|
SRX210 Services Gateway Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
10 |
|
SRX210 Services Gateway Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 11 |
|
SRX210 Services Gateway with Integrated Convergence Services Front Panel |
|
|
and Back Panel Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
12 |
|
SRX210 Services Gateway with Integrated Convergence Services Front |
|
|
Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
12 |
|
SRX210 Services Gateway with Integrated Convergence Services Back |
|
|
Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
13 |
|
SRX210 Services Gateway Built-In Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
14 |
|
SRX210 Services Gateway LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
18 |
|
Front Panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
18 |
|
Ethernet Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
20 |
|
Voice Interface Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
21 |
|
SRX210 Services Gateway Boot Devices and Dual-Root Partitioning Scheme . . . |
22 |
|
Boot Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
22 |
|
Dual-Root Partitioning Scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
23 |
|
SRX210 Services Gateway Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
23 |
|
SRX210 Services Gateway Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
25 |
Copyright © 2010, Juniper Networks, Inc. |
vii |
SRX210 Services Gateway Hardware Guide
Chapter 3 |
SRX210 Services Gateway 3G ExpressCard . . . . . . . . . . . . . . . . . . . . . . . . . . . |
29 |
|
SRX210 Services Gateway 3G ExpressCard Overview . . . . . . . . . . . . . . . . . . . . . . |
29 |
|
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
29 |
|
Supported Modem Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
29 |
|
Using the 3G ExpressCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
30 |
|
Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
30 |
|
Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 31 |
|
Installing the 3G ExpressCard in the SRX210 Services Gateway ExpressCard |
|
|
Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
32 |
|
SRX210 Services Gateway 3G ExpressCard Basic CLI Commands . . . . . . . . . . . . |
33 |
Chapter 4 |
SRX210 Services Gateway Power over Ethernet Support . . . . . . . . . . . . . . . |
35 |
|
SRX210 Services Gateway PoE Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
35 |
|
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
35 |
|
PoE Classes and Power Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
36 |
|
Configuring PoE Functionality on the SRX210 Services Gateway . . . . . . . . . . . . . . |
37 |
Chapter 5 |
SRX210 Services Gateway with Integrated Convergence Services . . . . . . . |
39 |
|
About the SRX210 Services Gateway with Integrated Convergence Services . . . . |
39 |
|
Basic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
40 |
|
Supported Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
40 |
|
Common Deployment Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
41 |
|
Understanding the Functions of the SRX210 Services Gateway with Integrated |
|
|
Convergence Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
41 |
|
SRX210 Services Gateway with Integrated Convergence Services |
|
|
Interoperability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
42 |
|
Configuring the SRX210 Services Gateway with Integrated Convergence |
|
|
Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
43 |
Chapter 6 |
SRX210 Services Gateway Mini-Physical Interface Modules . . . . . . . . . . . . |
45 |
|
SRX210 Services Gateway Mini-Physical Interface Modules . . . . . . . . . . . . . . . . . |
45 |
Part 2 |
Setting Up the SRX210 Services Gateway |
|
Chapter 7 |
Preparing the Site for the SRX210 Services Gateway Installation . . . . . . . . |
49 |
|
Site Preparation Checklist for the SRX210 Services Gateway . . . . . . . . . . . . . . . . |
49 |
|
General Site Guidelines for Installing the SRX210 Services Gateway . . . . . . . . . . . |
51 |
|
SRX210 Services Gateway Cabinet Requirements . . . . . . . . . . . . . . . . . . . . . . . . . |
51 |
|
SRX210 Services Gateway Rack Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . |
52 |
|
Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 |
|
|
Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
53 |
|
SRX210 Services Gateway Electrical and Power Requirements . . . . . . . . . . . . . . |
54 |
Chapter 8 |
Installation Overview for the SRX210 Services Gateway . . . . . . . . . . . . . . . . |
57 |
|
Installation Overview for the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . |
57 |
Chapter 9 |
Required Tools and Parts for Installing and Maintaining the SRX210 |
|
|
Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
59 |
|
Required Tools and Parts for Installing and Maintaining the SRX210 Services |
|
|
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
59 |
viii |
Copyright © 2010, Juniper Networks, Inc. |
Table of Contents
Chapter 10 |
Unpacking the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 61 |
|
Unpacking the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 61 |
|
Verifying Parts Received with the SRX210 Services Gateway . . . . . . . . . . . . . . . . . |
61 |
Chapter 11 |
Preparing the SRX210 Services Gateway for Installation . . . . . . . . . . . . . . . |
65 |
|
Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and |
|
|
Wall-Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
65 |
|
Preparing the SRX210 Services Gateway for Rack-Mount Installation . . . . . . . . . |
65 |
|
Preparing the SRX210 Services Gateway for Desk-Mount Installation . . . . . . . . . |
67 |
|
Preparing the SRX210 Services Gateway for Wall-Mount Installation . . . . . . . . . |
68 |
Chapter 12 |
Installing the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
69 |
|
SRX210 Services Gateway Safety Requirements, Warnings, and Guidelines . . . . |
69 |
|
SRX210 Services Gateway Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
69 |
|
Adjusting the Power Supply Adapter Tray for the SRX210 Services Gateway |
|
|
for Rack-Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
70 |
|
Installing the SRX210 Services Gateway in a Rack . . . . . . . . . . . . . . . . . . . . . . |
71 |
|
Installing the SRX210 Services Gateway on a Desk . . . . . . . . . . . . . . . . . . . . . |
74 |
|
Installing the SRX210 Services Gateway on a Wall . . . . . . . . . . . . . . . . . . . . . |
76 |
|
Replacing or Installing Mini-Physical Interface Modules in the SRX210 Services |
|
|
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
78 |
Chapter 13 |
Connecting, Grounding, and Powering On the SRX210 Services |
|
|
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
79 |
|
Connecting the SRX210 Services Gateway to the Power Supply . . . . . . . . . . . . . . |
79 |
|
Connecting and Organizing Interface Cables for the SRX210 Services |
|
|
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
80 |
|
Grounding the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
82 |
|
Powering On and Powering Off the SRX210 Services Gateway . . . . . . . . . . . . . . . |
83 |
|
Powering On the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . |
83 |
|
Powering Off the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . |
84 |
|
Resetting the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
85 |
Chapter 14 |
SRX210 Services Gateway Autoinstallation . . . . . . . . . . . . . . . . . . . . . . . . . . |
87 |
|
SRX210 Services Gateway Autoinstallation Overview . . . . . . . . . . . . . . . . . . . . . . |
87 |
Chapter 15 |
Connecting the SRX210 Services Gateway to Management Devices . . . . . |
89 |
|
Connecting an SRX210 Services Gateway to the J-Web Interface . . . . . . . . . . . . |
89 |
|
Connecting an SRX210 Services Gateway to the CLI Locally . . . . . . . . . . . . . . . . . |
91 |
|
Connecting an SRX210 Services Gateway to the CLI Remotely . . . . . . . . . . . . . . . |
93 |
|
Connecting the Modem at the SRX210 Services Gateway End . . . . . . . . . . . . . . . |
93 |
|
Connecting the Modem to the Console Port on the SRX210 Services |
|
|
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
94 |
|
Connecting to the CLI at the User End for the SRX210 Services Gateway . . . . . . . |
95 |
Chapter 16 |
Performing Initial Software Configuration on the SRX210 Services |
|
|
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
97 |
|
SRX210 Services Gateway Software Configuration Overview . . . . . . . . . . . . . . . . |
97 |
|
Preparing the SRX210 Services Gateway for Configuration . . . . . . . . . . . . . . |
97 |
|
Understanding Built-In Ethernet Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
98 |
|
Mapping the Chassis Cluster Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
98 |
Copyright © 2010, Juniper Networks, Inc. |
ix |
SRX210 Services Gateway Hardware Guide
|
Understanding Management Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 99 |
|
Performing Initial Software Configuration on the SRX210 Services Gateway |
|
|
Using the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
100 |
|
Performing Initial Software Configuration on the SRX210 Services Gateway |
|
|
Using the J-Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
103 |
|
Establishing Basic Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
103 |
|
Configuring Basic System Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
104 |
|
SRX210 Services Gateway Secure Web Access Overview . . . . . . . . . . . . . . . . . . |
106 |
Part 3 |
Maintaining and Monitoring the SRX210 Services Gateway |
|
|
Hardware |
|
Chapter 17 |
Maintaining the SRX210 Services Gateway Hardware Components . . . . . |
. 111 |
|
Maintaining the SRX210 Services Gateway Hardware Components . . . . . . . . . . |
. 111 |
Chapter 18 |
Monitoring the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
113 |
|
Monitoring Hardware Components on the SRX210 Services Gateway . . . . . . . . . |
113 |
|
Monitoring the SRX210 Services Gateway Chassis Using the CLI . . . . . . . . . . |
113 |
|
Monitoring the SRX210 Services Gateway Components Using LEDs . . . . . . . |
115 |
|
Monitoring the SRX210 Services Gateway Using Chassis Alarm |
|
|
Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
118 |
|
Monitoring the SRX210 Services Gateway Power System . . . . . . . . . . . . . . . |
119 |
|
Resetting the Configuration File When the SRX210 Services Gateway Is |
|
|
Inaccessible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
120 |
|
Using the Reset Config Button on the SRX210 Services Gateway . . . . . . . . . |
121 |
|
Changing the Reset Config Button Behavior on the SRX210 Services |
|
|
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
121 |
|
Juniper Networks Technical Assistance Center . . . . . . . . . . . . . . . . . . . . . . . . . . . |
122 |
Part 4 |
Appendixes |
|
Appendix A |
Safety and Regulatory Compliance Information . . . . . . . . . . . . . . . . . . . . . . |
125 |
|
SRX210 Services Gateway Definition of Safety Warning Levels . . . . . . . . . . . . . . |
125 |
|
SRX210 Services Gateway General Safety Guidelines and Warnings . . . . . . . . . . |
127 |
|
General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
127 |
|
Qualified Personnel Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
128 |
|
Restricted Access Area Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
129 |
|
Preventing Electrostatic Discharge Damage to the Services Gateway . . . . . |
130 |
|
SRX210 Services Gateway Fire Safety Requirements . . . . . . . . . . . . . . . . . . . . . . |
131 |
|
SRX210 Services Gateway Installation Safety Guidelines and Warnings . . . . . . . |
132 |
|
SRX210 Services Gateway Laser and LED Safety Guidelines and Warnings . . . . |
136 |
|
Laser and LED Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . |
136 |
|
General Laser Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
136 |
|
Class 1 Laser Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
137 |
|
Class 1 LED Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
137 |
|
Laser Beam Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
138 |
|
Radiation from Open Port Apertures Warning . . . . . . . . . . . . . . . . . . . . |
138 |
x |
Copyright © 2010, Juniper Networks, Inc. |
Table of Contents
|
SRX210 Services Gateway Maintenance and Operational Safety Guidelines and |
|
|
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
139 |
|
Safety Guidelines and Wanrnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
139 |
|
Battery Handling Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
139 |
|
Jewelry Removal Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
140 |
|
Lightning Activity Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
142 |
|
Operating Temperature Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
142 |
|
Product Disposal Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
143 |
|
SRX210 Services Gateway Electrical Safety Guidelines and Warnings . . . . . . . . |
144 |
|
SRX210 Services Gateway Agency Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
145 |
|
SRX210 Services Gateway Compliance Statements for EMC Requirements . . . . |
147 |
|
SRX210 Services Gateway Compliance Statements for Environmental |
|
|
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
148 |
|
SRX210 Services Gateway Compliance Statements for Acoustic Noise . . . . . . . |
149 |
Appendix B |
SRX210 Services Gateway Power Guidelines, Requirements, and |
|
|
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
151 |
|
SRX210 Services Gateway Site Electrical Wiring Guidelines . . . . . . . . . . . . . . . . . |
151 |
|
SRX210 Services Gateway Power Specifications and Requirements . . . . . . . . . . |
153 |
|
SRX210 Services Gateway Grounding Specifications . . . . . . . . . . . . . . . . . . . . . . |
153 |
Appendix C |
SRX210 Services Gateway Interface Cable Specifications and Connector |
|
|
Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
155 |
|
Interface Cable and Wire Specifications for the SRX210 Services Gateway . . . . |
155 |
|
RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet Port . . . . . |
156 |
|
RJ-45 Connector Pinouts for the SRX210 Services Gateway Console Port . . . . . |
157 |
|
RJ-11 Connector Pinouts for the SRX210 Services Gateway with Integrated |
|
|
Convergence Services FXO and FXS Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . |
158 |
Appendix D |
Contacting Customer Support and Returning the SRX210 Services |
|
|
Gateway Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
159 |
|
Return Procedure for the SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . . . . |
159 |
|
Locating an SRX210 Services Gateway Component Serial Number and Agency |
|
|
Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
160 |
|
Listing the SRX210 Services Gateway and Component Details with the |
|
|
CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
160 |
|
SRX210 Services Gateway Chassis Serial Number and Agency Labels . . . . . |
161 |
|
SRX210 Services Gateway Mini-Physical Interface Module Serial Number |
|
|
Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
161 |
|
Contacting Customer Support to Obtain Return Materials Authorization . . . . . . |
162 |
|
Information You Might Need to Supply to Juniper Networks Technical |
|
|
Assistance Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
162 |
|
Contacting Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
162 |
|
Packing the SRX210 Services Gateway and Components for Shipment . . . . . . . |
163 |
|
Packing the Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
163 |
|
Packing the Components for Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
164 |
Part 5 |
Index |
|
|
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
167 |
Copyright © 2010, Juniper Networks, Inc. |
xi |
SRX210 Services Gateway Hardware Guide
xii |
Copyright © 2010, Juniper Networks, Inc. |
This preface includes the following topics:
•Objectives on page xiii
•Audience on page xiii
•Documentation Conventions on page xiii
•SRX Series Documentation and Release Notes on page xv
•Obtaining Documentation on page xv
•Documentation Feedback on page xvi
•Requesting Technical Support on page xvi
This guide describes hardware components and installation, basic configuration, and basic troubleshooting procedures for the Juniper Networks SRX210 Services Gateway. It explains how to prepare your site for services gateway installation, unpack and install the hardware, power on the services gateway, perform initial software configuration, and perform routine maintenance. After completing the installation and basic configuration procedures covered in this guide, see the Junos OS configuration guides for information about further Junos OS configuration.
This guide is designed for network administrators who are installing and maintaining a Juniper Networks SRX210 Services Gateway or preparing a site for device installation. Tousethisguide,youneedabroadunderstandingofnetworksingeneralandtheInternet in particular, networking principles, and network configuration. Any detailed discussion of these concepts is beyond the scope of this guide.
Table 1 on page xiv defines the notice icons used in this guide.
Copyright © 2010, Juniper Networks, Inc. |
xiii |
SRX210 Services Gateway Hardware Guide
Table 1: Notice Icons
Icon |
Meaning |
Description |
|
Informational note |
Indicates important features or instructions. |
|
Caution |
Indicates a situation that might result in loss of data or hardware damage. |
|
Warning |
Alerts you to the risk of personal injury or death. |
|
Laser warning |
Alerts you to the risk of personal injury from a laser. |
Table 2 on page xiv defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
Convention |
Description |
Bold text like this |
Represents text that you type. |
Fixed-width text like this |
Represents output that appears on the |
|
|
terminal screen. |
|
Italic text like this |
• |
Introduces important new terms. |
|
• |
Identifies book names. |
|
• |
IdentifiesRFCandInternetdrafttitles. |
Italic text like this |
Represents variables (options for which |
|
you substitute a value) in commands or |
|
configuration statements. |
Examples
To enter configuration mode, type the configure command:
user@host> configure
user@host> show chassis alarms
No alarms currently active
•A policy term is a named structure that defines match conditions and actions.
•Junos System Basics Configuration Guide
•RFC1997, BGPCommunitiesAttribute
Configure the machine’s domain name:
[edit]
root@# set system domain-name domain-name
Text like this |
Represents names of configuration |
|
statements, commands, files, and |
|
directories; IP addresses; configuration |
|
hierarchy levels; or labels on routing |
|
platform components. |
•To configure a stub area, include the stub statement at the [edit protocols ospf area area-id] hierarchy level.
•TheconsoleportislabeledCONSOLE.
< > (angle brackets) |
Enclose optional keywords or variables. |
stub <default-metric metric>; |
xiv |
Copyright © 2010, Juniper Networks, Inc. |
About This Guide
Table 2: Text and Syntax Conventions (continued)
Convention |
Description |
Examples |
| (pipe symbol) |
Indicates a choice between the mutually |
broadcast | multicast |
|
exclusive keywords or variables on either |
|
|
side of the symbol. The set of choices is |
(string1 | string2 | string3) |
|
often enclosed in parentheses for clarity. |
|
# (pound sign) |
Indicates a comment specified on the |
rsvp { # Required for dynamic MPLS only |
|
samelineastheconfigurationstatement |
|
|
to which it applies. |
|
[ ] (square brackets) |
Enclose a variable for which you can |
|
substitute one or more values. |
Indention and braces ( { } ) |
Identify a level in the configuration |
|
hierarchy. |
; (semicolon) |
Identifies a leaf statement at a |
|
configuration hierarchy level. |
J-Web GUI Conventions
Bold text like this |
Represents J-Web graphical user |
|
interface (GUI) items you click or select. |
> (bold right angle bracket) |
Separates levels in a hierarchy of J-Web |
|
selections. |
community name members [ community-ids ]
[edit] routing-options {
static {
route default { nexthop address; retain;
}
}
}
•In the Logical Interfaces box, select
All Interfaces.
•To cancel the configuration, click
Cancel.
In the configuration editor hierarchy, select Protocols>Ospf.
For a list of related SRX Series documentation, see
http://www.juniper.net/techpubs/hardware/srx-series-main.html.
If the information in the latest SRX Series Release Notes differs from the information in the documentation, follow the SRX Series Release Notes.
To obtain the most current version of all Juniper Networks technical documentation, see the products documentation page on the Juniper Networks web site at http://www.juniper.net/techpubs.
To order printed copies of this guide and other Juniper Networks technical documents, or to order a documentation CD, which contains this guide, contact your sales representative.
Copyright © 2010, Juniper Networks, Inc. |
xv |
SRX210 Services Gateway Hardware Guide
Copies of the Management Information Bases (MIBs) available in a software release are included on the documentation CDs and at http://www.juniper.net/.
We encourage you to provide feedback, comments, and suggestions so that we can improve the documentation. You can send your comments to techpubs-comments@juniper.net, or fill out the documentation feedback form at http://www.juniper.net/techpubs/docbug/docbugreport.html. If you are using e-mail, be sure to include the following information with your comments:
•Document name
•Document part number
•Page number
•Software release version (not required for Network Operations Guides [NOGs])
TechnicalproductsupportisavailablethroughtheJuniperNetworksTechnicalAssistance Center (JTAC). If you are a customer with an active J-Care or JNASC support contract, or are covered under warranty, and need postsales technical support, you can access our tools and resources online or open a case with JTAC.
•JTAC policiesFor a complete understanding of our JTAC procedures and policies, review the JTAC User Guide located at http://www.juniper.net/customers/support/downloads/710059.pdf.
•Product warrantiesFor product warranty information, visit http://www.juniper.net/support/warranty/.
•JTAC Hours of OperationThe JTAC centers have resources available 24 hours a day, 7 days a week, 365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features:
•Find CSC offerings: http://www.juniper.net/customers/support/
•Search for known bugs: http://www2.juniper.net/kb/
•Find product documentation: http://www.juniper.net/techpubs/
•Find solutions and answer questions using our Knowledge Base: http://kb.juniper.net/
•Download the latest versions of software and review release notes: http://www.juniper.net/customers/csc/software/
•Search technical bulletins for relevant hardware and software notifications: https://www.juniper.net/alerts/
xvi |
Copyright © 2010, Juniper Networks, Inc. |
About This Guide
•Join and participate in the Juniper Networks Community Forum: http://www.juniper.net/company/communities/
•Open a case online in the CSC Case Manager: http://www.juniper.net/cm/
Toverifyserviceentitlementbyproductserialnumber,useourSerialNumberEntitlement (SNE) tool located at https://tools.juniper.net/SerialNumberEntitlementSearch/.
Opening a Case with JTAC
You can open a case with JTAC on the Web or by telephone.
•Use the Case Manager tool in the CSC at http://www.juniper.net/cm/.
•Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
For international or direct-dial options in countries without toll-free numbers, visit us at http://www.juniper.net/support/requesting-support.html.
Copyright © 2010, Juniper Networks, Inc. |
xvii |
SRX210 Services Gateway Hardware Guide
xviii |
Copyright © 2010, Juniper Networks, Inc. |
PART 1
SRX210 Services Gateway Overview
•Introduction to the SRX210 Services Gateway on page 3
•SRX210 Services Gateway Hardware Components and Specifications on page 7
•SRX210 Services Gateway 3G ExpressCard on page 29
•SRX210 Services Gateway Power over Ethernet Support on page 35
•SRX210 Services Gateway with Integrated Convergence Services on page 39
•SRX210 Services Gateway Mini-Physical Interface Modules on page 45
Copyright © 2010, Juniper Networks, Inc. |
1 |
SRX210 Services Gateway Hardware Guide
2 |
Copyright © 2010, Juniper Networks, Inc. |
CHAPTER 1
Introduction to the SRX210 Services Gateway
This chapter includes the following topics:
•SRX210 Services Gateway Description on page 3
•SRX210 Services Gateway Hardware Features on page 4
This topic includes the following sections:
•About the SRX210 Services Gateway on page 3
•SRX210 Services Gateway Models on page 3
•Accessing the SRX210 Services Gateway on page 4
The Juniper Networks SRX210 Services Gateway offers complete functionality and flexibilityfordeliveringsecure,reliabledataandvoiceservicesoverIP,alongwithmultiple interfaces that support WAN and LAN connectivity. Features include SIP/analog voice support, flexible data/voice T1/E1, and Power over Ethernet (PoE).
TheSRX210ServicesGatewayprovidesInternetProtocolSecurity(IPsec),virtualprivate network (VPN), and firewall services for small-sized and medium-sized companies and enterprise branch and remote offices. Additional security features also include Unified ThreatManagement(UTM),whichconsistsofIPSantispam,antivirus,andWebfiltering.
The SRX210 Services Gateway runs the Junos operating system.
The SRX210 Services Gateway is available in six models, which are listed in Table 3 on page 3.
Table 3: SRX210 Services Gateway Models
Product Name |
Device Type |
Model Number |
SRX210 Services Gateway |
Low Memory |
SRX210B |
Copyright © 2010, Juniper Networks, Inc. |
3 |
SRX210 Services Gateway Hardware Guide
Table 3: SRX210 Services Gateway Models (continued)
Product Name |
Device Type |
Model Number |
SRX210 Services Gateway |
High Memory |
SRX210H |
SRX210ServicesGateway(TAA |
High Memory (TAA Compliant |
SRX210H-TAA |
Compliant) |
) |
|
SRX210 Services Gateway with |
High Memory with Power over |
SRX210H-POE |
PoE |
Ethernet (PoE) |
|
SRX210 Services Gateway with |
High Memory with PoE (TAA |
SRX210H-POE-TAA |
PoE (TAA Compliant ) |
Compliant ) |
|
SRX210 Services Gateway with |
High Memory, PoE, and Voice |
SRX210H-P-MGW |
integratedconvergenceservices |
|
|
All SRX210 Services Gateways run the Junos operating system.
Two user interfaces are available for monitoring, configuring, troubleshooting, and managing the SRX210 Services Gateway:
•J-Web interface: Web-based graphical interface that allows you to operate a services gateway without commands. The J-Web interface provides access to all Junos functionality and features.
•Junos OS command-line interface (CLI): Juniper Networks command shell that runs ontopofaUNIX-basedoperatingsystemkernel.TheCLIisastraightforwardcommand interface. On a single line, you type commands that are executed when you press the Enter key. The CLI provides command Help and command completion.
Related |
• |
SRX210 Services Gateway Specifications on page 7 |
Documentation |
• |
SRX210 Services Gateway Hardware Features on page 4 |
Table 4 on page 4 lists the hardware features supported on the SRX210 Services
Gateway.
Table 4: SRX210 Services Gateway Hardware Features
|
|
|
|
SRX210 |
|
|
|
|
Services |
|
SRX210 |
SRX210 |
SRX210 |
Gateway with |
|
Services |
Services |
Services |
Integrated |
|
Gateway Low |
Gateway High |
GatewayPower |
Convergence |
Feature |
Memory |
Memory |
over Ethernet |
Services |
DDR memory |
512 MB |
1 GB |
1 GB |
1 GB |
4 |
Copyright © 2010, Juniper Networks, Inc. |
Chapter 1: Introduction to the SRX210 Services Gateway
Table 4: SRX210 Services Gateway Hardware Features (continued)
|
|
|
|
SRX210 |
|
|
|
|
Services |
|
SRX210 |
SRX210 |
SRX210 |
Gateway with |
|
Services |
Services |
Services |
Integrated |
|
Gateway Low |
Gateway High |
GatewayPower |
Convergence |
Feature |
Memory |
Memory |
over Ethernet |
Services |
SIP/analog voice |
No |
No |
No |
Yes |
support |
|
|
|
|
PoE support |
No |
No |
Yes |
Yes |
Power supply |
60 watts |
60 watts |
150 watts |
150 watts |
adapter |
|
|
|
|
AC input voltage |
100 to 240 VAC |
100 to 240 VAC |
100 to 240 VAC |
100 to 240 VAC |
Gigabit Ethernet |
2 |
2 |
2 |
2 |
ports |
|
|
|
|
Fast Ethernet |
6 |
6 |
6 |
6 |
ports |
|
|
|
|
Console port |
1 |
1 |
1 |
1 |
USB ports |
2 |
2 |
2 |
2 |
ForeignExchange |
None |
None |
None |
Two FXS ports |
Station (FXS) |
|
|
|
and two FXO |
and Foreign |
|
|
|
ports |
Exchange Office |
|
|
|
|
(FXO) interface |
|
|
|
|
Mini-PIM slots |
1 |
1 |
1 |
1 |
LEDs |
Status, Alarm, |
Status, Alarm, |
Status, Alarm, |
Status, Alarm, |
|
HA, Power, |
HA, Power, |
HA, Power, |
HA, Power, |
|
Mini-PIMs, 3G |
Mini-PIMs, 3G |
Mini-PIMs, 3G |
Mini-PIMs, 3G |
|
ExpressCard, |
ExpressCard, |
ExpressCard, |
ExpressCard, |
|
Port (TX/RX and |
Port (TX/RX |
Port (TX/RX and |
Port(TX/RXand |
|
PoE) |
and PoE) |
PoE) |
PoE), and Voice |
|
|
|
|
Interface |
NAND flash |
1 GB |
1 GB |
1 GB |
2 GB |
Fans |
1 |
1 |
1 |
2 |
NOTE: ThePoELEDisenabledonlyonthePoEmodeloftheSRX210Services Gateway. For non-PoE services gateways, the PoE LED remains off.
Copyright © 2010, Juniper Networks, Inc. |
5 |
SRX210 Services Gateway Hardware Guide
For more details on the SRX210 Services Gateway software features and licenses, see the Junos OS Administration Guide.
Related • SRX210 Services Gateway Description on page 3
Documentation • SRX210 Services Gateway Specifications on page 7
6 |
Copyright © 2010, Juniper Networks, Inc. |
CHAPTER 2
SRX210 Services Gateway Hardware
Components and Specifications
This chapter includes the following topics:
•SRX210 Services Gateway Specifications on page 7
•SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High Memory, and PoE Versions) on page 10
•SRX210ServicesGatewaywithIntegratedConvergenceServicesFrontPanelandBack Panel Views on page 12
•SRX210 Services Gateway Built-In Interfaces on page 14
•SRX210 Services Gateway LEDs on page 18
•SRX210ServicesGatewayBootDevicesandDual-RootPartitioningSchemeonpage22
•SRX210 Services Gateway Cooling System on page 23
•SRX210 Services Gateway Power Supply on page 25
The SRX210 Services Gateway chassis is a rigid sheet metal structure of 1 rack unit (U) height that houses all the other hardware components.
Figure 1 on page 8 shows the SRX210 Services Gateway with Integrated Convergence
Services chassis.
Copyright © 2010, Juniper Networks, Inc. |
7 |
SRX210 Services Gateway Hardware Guide
Figure1:SRX210ServicesGatewaywithIntegratedConvergenceServices
Figure 2 on page 8 shows the SRX210 Services Gateway chassis (for low memory, high memory, and PoE models).
Figure 2: SRX210 Services Gateway
Table 5 on page 8 provides information on the physical specifications of the device.
Table 5: SRX210 Services Gateway Specifications
Specification |
Value |
|
Chassis height |
1 unit (U) |
|
Chassis width |
11.02 in. (28 cm) |
|
Chassis depth |
7.04 in. (17.9 cm) |
|
Chassis weight |
• |
3.43lb(1.56kg)forSRX210ServicesGatewayLow |
|
|
Memory and High Memory models |
|
• |
3.50lb(1.59kg)forSRX210ServicesGatewaywith |
|
|
PoE |
|
• |
3.76lb.(1.70kg)forSRX210ServicesGatewaywith |
|
|
Integrated Convergence Services |
8 |
Copyright © 2010, Juniper Networks, Inc. |
Chapter 2: SRX210 Services Gateway Hardware Components and Specifications
Table 5: SRX210 Services Gateway Specifications (continued)
Specification |
Value |
Average power consumption |
• SRX210 Services Gateway Low Memory model: 27 |
|
watts |
|
• SRX210ServicesGatewayHighMemorymodel:28 |
|
watts |
|
• SRX210 Services Gateway PoE model: 34 watts |
|
(excluding PoE load) |
|
• SRX210 Services Gateway with Integrated |
|
Convergence Services model: 43 watts (excluding |
|
PoE load) |
Altitude |
• Noperformancedegradationupto10,000ft(3048 |
|
m) for SRX210 Services Gateway Low Memory, |
|
High Memory, and PoE models |
|
• No performance degradation up to 6561 ft (2000 |
|
m) for SRX210 Services Gateway with Integrated |
|
Convergence Services) |
Relative humidity |
5% to 90%, noncondensing |
Temperature |
Normal operation ensured in temperature range of |
|
32°F (0°C) to 104°F (+40°C) |
|
Nonoperating storage temperature in shipping |
|
container: –40°F (–40°C) to 158°F (70°C) |
Maximum thermal output |
NOTE: Thesespecificationsareestimatesandsubject |
|
to change. |
|
• SRX210 Services Gateway Low Memory: 120 |
|
BTU/hour |
|
• SRX210 Services Gateway High Memory: 126 |
|
BTU/hour |
|
• SRX210ServicesGatewaywithPoE:164BTU/hour |
|
(Excluding PoE load) |
|
• SRX210 Services Gateway with Integrated |
|
Convergence Services: 232 BTU/hour (Excluding |
|
PoE load) |
Noise level |
70 dB(A) or less per EN ISO 7779 |
CAUTION: Beforeremovingorinstallingcomponentsofafunctioningservices gateway, attach an electrostatic discharge (ESD) strap to an ESD point and placetheotherendofthestraparoundyourbarewrist. FailuretouseanESD strap could result in damage to the services gateway.
Related • SRX210 Services Gateway Description on page 3
Documentation • SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High Memory, and PoE Versions) on page 10
Copyright © 2010, Juniper Networks, Inc. |
9 |
SRX210 Services Gateway Hardware Guide
•Monitoring the SRX210 Services Gateway Components Using LEDs on page 115
•SRX210 Services Gateway Electrical Safety Guidelines and Warnings on page 144
This topic contains views of the front panel and back panel of the SRX210 Services Gateway high memory, low memory, and Power over Ethernet (PoE) versions. This topic includes the following sections:
•SRX210 Services Gateway Front Panel on page 10
•SRX210 Services Gateway Back Panel on page 11
Figure 3 on page 10 shows the front panel of the SRX210 Services Gateway.
Figure 3: SRX210 Services Gateway Front Panel
Table 6 on page 10 lists the front panel components of the services gateway.
NOTE: The numbers in Figure 3 on page 10 correspond to the numbers in
Table 6 on page 10.
Table 6: SRX210 Services Gateway Front Panel Components
Number |
Component |
1 |
Mini-PIM slot |
2 |
Power button |
3 |
LEDs: Status, Alarm, Power, 3G ExpressCard, Mini-PIM, HA |
4 |
Reset Config button |
5 |
Universal Serial Bus (USB) ports |
6 |
Console port |
10 |
Copyright © 2010, Juniper Networks, Inc. |
Chapter 2: SRX210 Services Gateway Hardware Components and Specifications
Table6:SRX210ServicesGatewayFrontPanelComponents(continued)
Number |
Component |
7 |
Gigabit Ethernet ports and Fast Ethernet ports |
For more information on the front panel components, see the following topics:
•SRX210 Services Gateway Built-In Interfaces on page 14
•SRX210 Services Gateway LEDs on page 18
•SRX210ServicesGatewayBootDevicesandDual-RootPartitioningSchemeonpage22
Figure 4 on page 11 illustrates the back panel of the SRX210 Services Gateway.
Figure 4: SRX210 Services Gateway Back Panel
g031113
Table 7 on page 11 lists the back panel components of the SRX210 Services Gateway.
NOTE: The numbers in Figure 4 on page 11 correspond to the numbers in
Table 7 on page 11.
Table 7: SRX210 Services Gateway Back Panel Components
Number |
Component |
1 |
Power supply point |
2 |
Cable tie holder |
3 |
Grounding point |
4 |
Lock |
5 |
ExpressCard slot |
Copyright © 2010, Juniper Networks, Inc. |
11 |
SRX210 Services Gateway Hardware Guide
NOTE: The cable tie holder provides support to hold the power cord on to the power supply point.
The lock provides the capability to lock and secure the device to the installation site.
Related • SRX210 Services Gateway Specifications on page 7
Documentation • SRX210 Services Gateway Built-In Interfaces on page 14
•SRX210 Services Gateway LEDs on page 18
•SRX210ServicesGatewayBootDevicesandDual-RootPartitioningSchemeonpage22
•SRX210 Services Gateway Cooling System on page 23
•SRX210 Services Gateway Power Supply on page 25
SRX210ServicesGatewaywithIntegratedConvergenceServicesFrontPanelandBack
Panel Views
This topic contains views of the front panel and back panel of the SRX210 Services GatewaywithIntegratedConvergenceServices.Thistopicincludesthefollowingsections:
•SRX210ServicesGatewaywithIntegratedConvergenceServicesFrontPanelonpage12
•SRX210ServicesGatewaywithIntegratedConvergenceServicesBackPanelonpage13
Figure5onpage12showsthefrontpaneloftheSRX210ServicesGatewaywithIntegrated
Convergence Services.
Figure5:SRX210ServicesGatewaywithIntegratedConvergenceServices
Front Panel
Table 8 on page 13 lists the front panel components of the services gateway.
NOTE: The numbers in Table 8 on page 13 correspond to the numbers in
Figure 5 on page 12.
12 |
Copyright © 2010, Juniper Networks, Inc. |