How it Works
Jungheinrich
Loading...
EFG 318k
User Manual
454 pgs18.63 Mb0

Jungheinrich EFG 318k, EFG 318, EFG 220, EFG 216, EFG 216k User Manual

...
EFG 213-320
09.09 -
Operating instructions G
51151902
09.11
EFG 213 EFG 215
EFG 216k EFG 216 EFG 218k EFG 218 EFG 220 EFG 316k EFG 316 EFG 318k EFG 318 EFG 320
Declaration of Conformity
Jungheinrich AG, Am Stadtrand 35, D-22047 Hamburg Manufacturer or agent acting in the European Union
Type Option Serial no. Year of
EFG 213 EFG 215 EFG 216k EFG 216 EFG 218k EFG 218 EFG 220 EFG 316k EFG 316 EFG 318k EFG 318 EFG 320
Additional information
On behalf of
Date
G EU Conformity Declaration
The undersigned hereby declare that the powered industrial truck described below in detail complies with the European Directives 2006/42/EC (Machinery Directive) and 2004/108/EEC (Electromagnetic Compatibility - EMC) including amendments as well as the legislative decree to incorporate the directives in national law. The signatories are in each case individually authorized to compile the technical documents.
manufacture
3
4
EN
WARNING!
Unsuitable batteries that have not been approved by Jungheinrich for the truck can be hazardous
The design, weight and dimensions of the battery have a considerable effect on the operational safety of the truck, in particular its stability and capacity. The use of unsuitable batteries that have not been approved by Jungheinrich for the truck can lead to a deterioration of the braking system during energy recovery operations and also cause considerable damage to the electrical control system. The use of batteries that have not been approved by Jungheinrich can therefore affect the health and safety of personnel.
XOnly manufacturer-approved batteries may be used on the truck. XReplacement of the battery equipment requires the manufacturer's agreement. XWhen replacing/installing the battery make sure the battery is securely located in
the battery compartment of the truck.
XDo not use batteries that have not been approved by the manufacturer.
EN
WARNING!
Unsuitable batteries that have not been approved by Jungheinrich for the truck can be hazardous
The design, weight and dimensions of the battery have a considerable effect on the operational safety of the truck, in particular its stability and capacity. The use of unsuitable batteries that have not been approved by Jungheinrich for the truck can lead to a deterioration of the braking system during energy recovery operations and also cause considerable damage to the electrical control system. The use of batteries that have not been approved by Jungheinrich can therefore affect the health and safety of personnel.
XOnly manufacturer-approved batteries may be used on the truck. XReplacement of the battery equipment requires the manufacturer's agreement. XWhen replacing/installing the battery make sure the battery is securely located in
the battery compartment of the truck.
XDo not use batteries that have not been approved by the manufacturer.
Foreword
Notes on the operating instructions
The present ORIGINAL OPERATING INSTRUCTIONS are designed to provide sufficient instruction for the safe operation of the industrial truck. The information is provided clearly and concisely. The chapters are arranged by letter and the pages are numbered continuously.
The operator manual details different industrial truck models. When operating and servicing the industrial truck, make sure that the particular section applies to your truck model.
Our trucks are subject to ongoing development. Jungheinrich reserves the right to alter the design, equipment and technical features of the system. No guarantee of particular features of the truck should therefore be assumed from the present operating instructions.
Safety notices and text mark-ups
Safety instructions and important explanations are indicated by the following graphics:
DANGER!
Indicates an extremely hazardous situation. Failure to comply with this instruction will result in severe irreparable injury and even death.
WARNING!
Indicates an extremely hazardous situation. Failure to comply with this instruction may result in severe irreparable injury and even death.
CAUTION!
Indicates a hazardous situation. Failure to comply with this instruction may result in slight to medium injury.
NOTE
Indicates a material hazard. Failure to comply with this instruction may result in material damage.
Z Used before notices and explanations.
t Indicates standard equipment o Indicates optional equipment
Copyright
Copyright of these operating instructions remains with JUNGHEINRICH AG.
5
Jungheinrich Aktiengesellschaft
Am Stadtrand 35 22047 Hamburg - Germany
Tel: +49 (0) 40/6948-0
www.jungheinrich.com
6
Table of Contents
A Correct Use and Application ................................................... 11
1General....................................................................................................11
2Correct application...................................................................................11
3Approved application conditions..............................................................12
4Proprietor responsibilities........................................................................13
5Adding attachments and/or accessories..................................................13
BTruck Description....................................................................15
1Application...............................................................................................15
1.1 Truck models and rated capacity............................................................. 15
2Assemblies and Functional Description...................................................16
2.1 Assembly Overview ................................................................................. 16
2.2 Functional Description ............................................................................. 17
3Technical Specifications..........................................................................18
3.1 Performance data .................................................................................... 19
3.2 Dimensions.............................................................................................. 21
3.3 Weights.................................................................................................... 27
3.4 Mast versions .......................................................................................... 28
3.5 Tyre type.................................................................................................. 29
3.6 Engine Data............................................................................................. 30
3.7 EN norms................................................................................................. 31
3.8 Conditions of use..................................................................................... 32
3.9 Electrical requirements ............................................................................ 32
4 Identification points and data plates ........................................................ 33
4.1 Indication Points ...................................................................................... 33
4.2 Data plate ................................................................................................ 35
4.3 Truck capacity plate................................................................................. 36
4.4 Attachment capacity plate ....................................................................... 37
5Stability....................................................................................................37
CTransport and Commissioning................................................39
1Transport.................................................................................................39
2Truck laden..............................................................................................39
2.1 Centre of gravity of the truck ................................................................... 39
2.2 Lifting the truck by crane ......................................................................... 40
2.3 Loading with another industrial truck ....................................................... 41
3 Securing the truck during transport ......................................................... 42
4Using the Truck for the First Time...........................................................44
7
DBattery - Servicing, Recharging, Replacement.......................45
1 Safety Regulations Governing the Handling of Lead-Acid Batteries ....... 45
1.1 General notes on handling batteries........................................................ 47
2Battery types............................................................................................48
2.1 Battery dimensions .................................................................................. 49
3 Exposing the battery................................................................................ 50
4 Charging the battery ................................................................................ 51
4.1 Charging the battery with a stationary charger........................................ 51
4.2 Charging the battery with an on-board charger ....................................... 52
5Battery removal and installation..............................................................56
5.1 Battery holder assembly .......................................................................... 57
5.2 Removal and installation using an EJE pallet truck with Snapfit battery
holder (o) ................................................................................................. 59
5.3 Removal and installation using a hand pallet truck with Snapfit battery
holder (o) ................................................................................................. 62
5.4 Removal and installation using a multi-adapter (o) ................................. 65
5.5 Removal and installation using a worktable for crane loading (o) ........... 67
5.6 Removal and installation using a fork shoe (o)........................................ 69
5.7 Removal and installation using a roller conveyor (o)............................... 71
5.8 Hook-on battery door removal and installation (o)................................... 72
EOperation................................................................................73
1 Safety Regulations for the Operation of the Forklift Truck....................... 73
2Displays and Controls..............................................................................75
2.1 Control panel with display unit................................................................. 79
2.2 Armrest control panel switch (o) .............................................................. 82
2.3 Side compartment control panel switch (o) ............................................. 83
2.4 Display..................................................................................................... 84
3 Preparing the Truck for Operation ........................................................... 87
3.1 Checks and operations to be performed before starting daily operation . 87
3.2 Entry and exit........................................................................................... 89
3.3 Trucks with reduced headroom X (o) ...................................................... 89
3.4 Setting up the operator position............................................................... 90
3.5 Seat Belt .................................................................................................. 94
4 Industrial Truck Operation ....................................................................... 95
4.1 Safety regulations for truck operation...................................................... 95
4.2 Preparing the truck for operation ............................................................. 97
4.3 Setting the time........................................................................................ 98
4.4 Parking the truck securely ....................................................................... 99
4.5 Emergency Disconnect............................................................................ 100
4.6 Travel....................................................................................................... 101
4.7 Steering ................................................................................................... 102
4.8 Brakes ..................................................................................................... 103
4.9 Adjusting the forks ................................................................................... 105
4.10 Replacing the forks .................................................................................. 106
4.11 Lifting, transporting and depositing loads ................................................ 107
4.12 Operating the lift mechanism and integrated attachments ...................... 109
4.13 Safety instructions for operating additional attachments ......................... 116
4.14 Operating additional attachments for the SOLO-PILOT .......................... 120
8
4.15 Operating additional attachments for the Multi Pilot ................................ 122
4.16 Fitting additional attachments .................................................................. 124
5Towing trailers.........................................................................................126
6Optional equipment.................................................................................128
6.1 CanCode keypad..................................................................................... 128
6.2 Assistance systems ................................................................................. 132
6.3 Steel cab.................................................................................................. 134
6.4 Sliding windows ....................................................................................... 134
6.5 Automatic / mechanical folding gate........................................................ 135
6.6 Panel door ............................................................................................... 136
6.7 Operator position extension..................................................................... 136
6.8 Adjusting the driver’s seat ....................................................................... 137
6.9 Heating .................................................................................................... 138
6.10 Removable load backrest ........................................................................ 139
6.11 Lift cutout override ................................................................................... 139
6.12 Fire extinguisher ...................................................................................... 140
6.13 Tilt angle display ...................................................................................... 140
6.14 Rockinger coupling with hand lever or remote control............................. 141
6.15 Camera system ....................................................................................... 142
6.16 Control layout “N” .................................................................................... 143
7Troubleshooting.......................................................................................144
7.1 Troubleshooting....................................................................................... 144
7.2 Operating the truck without its own drive system .................................... 146
7.3 Emergency lowering ................................................................................ 149
FIndustrial Truck Maintenance..................................................151
1 Operational Safety and Environmental Protection................................... 151
2Maintenance Safety Regulations.............................................................152
3Servicing and Inspection.........................................................................157
4Maintenance checklist EFG 213-220.......................................................158
4.1 Owner ...................................................................................................... 158
4.2 Customer Service .................................................................................... 161
5Maintenance checklist EFG 316-320.......................................................170
5.1 Owner ...................................................................................................... 170
5.2 Customer Service .................................................................................... 173
6 Lubricants and Lubrication Schedule ...................................................... 182
6.1 Handling consumables safely.................................................................. 182
6.2 Lubrication Schedule ............................................................................... 184
6.3 Consumables........................................................................................... 185
7Maintenance and repairs.........................................................................187
7.1 Preparing the truck for maintenance and repairs .................................... 187
7.2 Opening the rear panel............................................................................ 187
7.3 Checking the wheel attachments............................................................. 188
7.4 Hydraulic system ..................................................................................... 189
7.5 Check the gear oil level ........................................................................... 192
7.6 Heating .................................................................................................... 193
7.7 Adding window washer system fluid........................................................ 193
7.8 Checking electrical fuses......................................................................... 194
7.9 Seat belt maintenance............................................................................. 198
7.10 Restoring the truck to service after maintenance and repairs ................. 199
8Decommissioning the industrial truck......................................................200
9
8.1 Prior to decommissioning ........................................................................ 201
8.2 During decommissioning ......................................................................... 201
8.3 Restoring the truck to service after decommissioning ............................. 202
9Safety tests to be performed at intervals and after unusual incidents.....203
10 Final de-commissioning, disposal............................................................ 204
11 Human vibration measurement ............................................................... 204
10
Appendix
JH Traction Battery Operating Instructions
These operating instructions apply only to Jungheinrich battery models. If using
Z
another brand, refer to the manufacturer's operating instructions.
If using a battery with closed EPzV and EPzV ironclad plates, this must first be
M
discussed with the manufacturer.
0506.GB
1
0506.GB
2
ACorrect Use and Application
1General
The industrial truck described in the present operating instructions is designed for lifting, lowering and transporting load units. It must be used, operated and serviced in accordance with the present instructions. Any other type of use is beyond the scope of application and can result in damage to personnel, the industrial truck or property.
2 Correct application
NOTE
The maximum load and load distance are indicated on the load chart and must not be exceeded. The load must rest on the load handler or be lifted by an attachment approved by the manufacturer. The load must rest on the back of the fork carriage and centrally between the forks.
–Lifting and lowering loads. –Transporting lowered loads over short distances. –Do not travel with a raised load (>30 cm). – Do not carry or lift passengers. –Do push or pull load units. – Occasional towing of trailer loads. –When towing trailer loads the load must be secured on the trailer. – The permissible trailer load must not be exceeded.
09.11 EN
11
3Approved application conditions
DANGER!
Do not exceed the permissible surface and spot load limits on the travel routes. At blind spots get a second person to assist. The driver must ensure that the loading dock / ramp cannot move or come loose during loading / unloading.
–Operation in industrial and commercial environments. –Permissible temperature range -20°C to 40°C. –Operation only on secure, level surfaces with sufficient capacity. –Operation only on routes that are visible and approved by the proprietor. –Negotiating inclines up to a maximum of 15 %. –Do not negotiate inclines crosswise or at an angle. Transporting loads downhill. –Operation in partially public traffic.
WARNING!
Extreme conditions
XSpecial equipment and authorisation are required if the truck is to be constantly
used in extreme conditions, especially in dusty or corrosive atmospheres.
XThe truck is not authorised for use in areas at risk of explosion. XIn adverse weather conditions (thunder, lightning) the industrial truck must not be
operated outside or in endangered areas.
12
4Proprietor responsibilities
For the purposes of the present operating instructions the “proprietor” is defined as any natural or legal person who either uses the industrial truck himself, or on whose behalf it is used. In special cases (e.g. leasing or renting) the proprietor is considered the person who, in accordance with existing contractual agreements between the owner and user of the industrial truck, is charged with operational duties. The proprietor must ensure that the industrial truck is used only for the purpose for which it is intended and that there is no danger to life and limb of the user and third parties. Furthermore, accident prevention regulations, safety regulations and operating, servicing and repair guidelines must be followed. The proprietor must ensure that all users have read and understood these operating instructions.
NOTE
Failure to comply with the operating instructions shall invalidate the warranty. The same applies if improper work is carried out on the truck by the customer or third parties without the permission of the manufacturer.
5 Adding attachments and/or accessories
Adding accessories
The mounting or installation of additional equipment which affects or enhances the performance of the forklift truck requires the written permission of the manufacturer. Local authority approval may also need to be obtained. Local authority approval does not however constitute the manufacturer’s approval.
09.11 EN
13
14
B Truck Description
1 Application
The EFG 213-320 is a three- or four-wheel electric sit-down counterbalanced truck. It is a cantilever counterbalanced truck which can lift, transport and deposit loads using the load handler attached in front. Closed bottom pallets can also be lifted.
1.1 Truck models and rated capacity
The rated capacity depends on the model. The rated capacity can be derived from the model description.
EFG 213-220213
EFG 213-
Model name
220
2Series
13 Rated capacity x 100 kg
The rated capacity does not generally match the permissible capacity. The capacity can be found on the load chart attached to the rack.
09.11 EN
15
2Assemblies and Functional Description
2.1 Assembly Overview
12
12
13
14
3
4
5
6
7
8
9
10
11
Item Description Item Description
1 t Driver's seat 8 t Fork tines 2 t Overhead guard 9 t Fork carriage 3 t Mast 10 t Power 4 t Steeri ng w heel 11 t Battery door 5 t Lift mechanism control 12 t Steer ax le 6 t Control / display unit 13 t Trailer coupling 7 t Emergency Disconnect
switch
t Standard equipment o Optional equipment
16
14 t Counterweight
2.2 Functional Description
Chassis
The chassis, in conjunction with the counterweight, forms the supporting base structure of the truck. It is used to support the main components.
Operator position and overhead guard
The overhead guard (2) comes in a range of models and protects the driver from falling objects and other external influences. All the controls are ergonomically arranged. The steering column and driver's seat can be adjusted individually.
The controls and warnings on the control and display unit (6) enable the system to be monitored during operation, thereby ensuring a very high level of safety.
Steering system
The electric steering offers a high level of efficiency and ergonomics. The height and tilt angle of the steering column are adjustable and can be set to suit all drivers. The low cross-section means the driver has maximum legroom at all times. The steering is particularly smooth, offering a high level of efficiency. This significantly reduces the overall energy consumption. The steer angle is shown in the display.
Wheels
There is a choice of super elastic or fully rubber tyres as well as optional pneumatic tyres.
Drive system and brakes
The 2-motor front drive provides maximum traction to the drive wheels at all times. When cornering, the exact speed required for the wheel on the inside or outside of the bend respectively is set in proportion to the steer angle.
The service brake is a maintenance-free disk brake. The truck also brakes regeneratively via the drive motors. The energy recovered in the process is fed back to the battery.
The parking brake automatically applies as soon as the truck comes to a halt. A warning indicator appears when the parking brake is applied. Brake system faults are shown on the control and display unit (6).
09.11 EN
17
Emergency Stop safety feature
If the system recognises a fault in the steering, an emergency stop is automatically introduced. The truck brakes to a halt, the travel direction does not change. An event message is shown in the control and display unit. The truck performs a self­test whenever it is switched on. Travel is only enabled again when the truck is operational and the parking brake (= emergency stop) released.
Hydraulic system
A multi-pilot valve allows for sensitive operation of the functions via the controls. A speed-controlled hydraulic pump ensures a proportionate and efficient supply to the hydraulic functions.
Mast
Two or three-stage masts, optionally with free lift function; narrow mast sections ensure excellent visibility of the forks and attachments. Fork carriage and mast run on permanently lubricated and hence maintenance-free support rollers.
Attachments
The trucks can be optionally fitted with mechanical and hydraulic attachments.
3Technical Specifications
All technical details refer to standard trucks. Values indicated with *) may vary, depending on the types of equipment used (e.g. mast, cabin, tyres etc.).
Z Technical data specified in accordance with VDI 2198.
Technical modifications and additions reserved.
18
3.1 Performance data
EFG 213-220
Description EFG
213 215
QRated capacity
(where C=500mm)
1
1300 1500 1600 1800 2000 kg
)
C Load centre 500 500 500 500 500 mm
Travel speed
Lift speed with / without load
Lowering speed with / without load
16/16 16/16 16/16 16/16 16/16
0.48/0.60 0.46/0.60 0.49/0.60 0.44/0.55 0.40/0.55 m/s
0.55/0.55 0.55/0.55 0.55/0.55 0.55/0.55 0.55/0.55 m/s
Gradeability (30 min)
7.6/12.5 7.3/12.3
with / without load
Max. gradeability
2
) (5 min)
28.0/35.0 27.0/35.0 27.0/35.0
with / without load
Acceleration (10 m)
3.6/3.2 3.8/3.4 3.8/3.4 3.9/3.5 4.0/3.5 s
with / without load
Max. operating pressure
Oil flow for attachments
1)
for vertical mast.
2)
The values shown represent the maximum gradeability to overcome short
200 200 200 200 200 bar
25 25 25 25 25
differences in height and surface unevenness (surface edges). The truck must not operate on inclines of more than 15%.
216k 218k
216 218
7.3/12.3 6.2/10.7
7.0/11.5 5.9/10.5
26.0/35.0
25.0/35.0
220
km/
h
5.7/10.4 %
24.0/35.0 %
l/
min
09.11 EN
19
EFG 316-320
Description EFG
316k 316 318k 318 320
QRated
capacity (where
1600 1600 1800 1800 2000 kg
C = 500 mm)1)
C Load centre 500 500 500 500 500 mm
Travel Speed *
Lift speed w / w.o. load
Lowering speed w / w.o. load
17/17 17/17 17/17 17/17 17/17
0.49/0.60 0.49/0.60 0.44/0.55 0.44/0.55 0.40/0.55 m/s
0.55/0.55 0.55/0.55 0.55/0.55 0.55/0.55 0.55/0.55 m/s
km/
h
Gradeability (30 min)
7.3/12.3 7.0/11.5 6.2/10.7 5.9/10.5 5.7/10.4 %
w./w.o. load
Max. gradeability
2) (5 min)
27.0/35.0 27.0/35.0 26.0/35.0 25.0/35.0 24.0/35.0 %
w./w.o. load
Acceleration (10 m)
3.8/3.4 3.8/3.4 3.9/3.5 3.9/3.5 4.0/3.5 s
w./w.o. load
Max. operating pressure
Oil flow for attachments
1)
for vertical mast.
2)
The values shown represent the maximum gradeability to overcome short
200 200 200 200 200 bar
25 25 25 25 25
l/
min
differences in height and surface unevenness (surface edges). The truck must not operate on inclines of more than 15%.
20
3.2 Dimensions
EFG 213-220
Description EFG
213 215
a/2 Safety distance 100 100 100 100 100 mm
Mast height
h
1
retracted
2000 2000 2000 2000 2000 mm
h2Free lift 150 150 150 150 150 mm
h3Lift 3000 3000 3000 3000 3000 mm
h4Mast height
extended
h6Overhead guard
height
3560 3560 3560 3587 3587 mm
2040 2040 2040 2040 2040 mm
h7Seat height 920 920 920 920 920 mm
h10Coupling height 560 560 560 560 560 mm
Į Mast tilt, fwd. 7 7 7 7 7 °
ȕ Mast tilt, back 7 7 7 7 7 °
L1Length including
forks
L2Headlength
2924 2924
1774 1774
216k 218k
216 218
3037 3037
3145 3145 mm
1887 1887
1995 1995
220
3145
mm
1995 mm
09.11 EN
21
c
h
4
h
3
h
Q
h
1
h
2
h
10
m
m
x
1
l
L
1
y
L
2
2
6
h
7
22
a 2
l
6
a
2
e
b
12
W
R
A
st
a
b
EFG 213-220
Description EFG
213 215
216k 218k
216 218
220
bOverall width 1060 1060 1060 1120 1120mm
eFork width 100 100 100 100 100mm
m
Ground clearance
1
with load below
80 80 80 80 80 mm
mast
m2Centre wheel
base ground
100 100 100 100 100 mm
clearance
Ast Working aisle
width for pallet 800x1200
3226 3226
3339 3339
3446 3446
3446 mm
longit.
Ast Aisle width for
pallet 1000x1200 diag.
Wa Turning radius
3104 3104
1440 1440
3216 3216
3323 3323
1548 1548
1655 1655
3323 mm
1655 mm
xLoad distance 335 335 340 340 340mm
yWheel distance
1249 1249
1357 1357
1465 1465
1465 mm
09.11 EN
23
c
h
4
h
3
h
Q
h
1
h
2
h
10
m
m
x
1
l
L
1
y
L
2
2
6
h
7
24
a 2
l
6
a
2
e
b
12
W
R
A
st
a
b
EFG 316-320
Description EFG
316k 316 318k 318 320
a/2 Safety distance 100 100 100 100 100 mm
h
Mast height
1
retracted
2000 2000 2000 2000 2000 mm
h2Free lift 150 150 150 150 150 mm
h3Lift 3000 3000 3000 3000 3000 mm
h
Mast height
4
extended
Overhead guard
h
6
height
3560 3560 3587 3587 3587 mm
2040 2040 2040 2040 2040 mm
h7Seat height 920 920 920 920 920 mm
h10Coupling height 410/580 410/580 410/580 410/580 410/580 mm
Į Mast tilt, fwd. 7 7 7 7 7 °
ȕ Mast tilt, back 7 7 7 7 7 °
L1Length including
forks
3140 3248 3140 3248 3248 mm
L2Headlength 1990 2098 1990 2098 2098 mm
bOverall width 1060 1060 1120 1120 1120mm
eFork width 100 100 100 100 100mm
m1Ground clearance
with load below
80 80 80 80 80 mm
mast
m2Centre wheel
base ground
100 100 100 100 100 mm
clearance
Ast Working aisle
width for pallet 800x1200
3599 3725 3599 3725 3725 mm
longit.
Ast Aisle width for
pallet 1000x1200
3403 3526 3403 3526 3526 mm
transv.
Wa Turning radius 1859 1985 1859 1985 1985 mm
xLoad distance 340 340 340 340 340mm
yWheel distance 1400 1508 1400 1508 1508mm
09.11 EN
25
c
h
4
h
3
h
Q
h
1
h
2
h
10
6
h
7
s
m
x
1
l
L
a 2
l
6
L
1
m
y
2
2
a 2
e
b
12
b
13
R
A
st
W
a
b
26
3.3 Weights
Z All dimensions in kg.
EFG 213-220
Description EFG
Net weight (including battery)
Front axle load (without lifting load)
Front axle load (with lifting load)
Rear axle load (without lifting load)
Rear axle load (with lifting load)
EFG 316-320
Description EFG
Net weight (including battery)
Front axle load (without lifting load)
Front axle load (with lifting load)
Rear axle load (without lifting load)
Rear axle load (with lifting load)
213 215
2733 2978
1326 1310
3545 3870
1407 1668
488 608
316k 316 318k 318 320
3035 3001 3175 3141 3306
1380 1493 1385 1499 1489
4004 4043 4336 4367 4676
1655 1508 1790 1642 1817
631 558 638 574 630
216k 218k
216 218
3000 3256
3057 3207
1411 1409
1496 1520
4052 4380
4060 4405
1589 1846
1561 1686
548 675
597 602
220
3382
1501
4706
1881
676
09.11 EN
27
Loading...
+ 424 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use