QRG 2680H
NOTE: Use this as a reference guide. For further details on procedures, see the Operator’s Manual provided with the machine.
Quick Reference Guide
Connect Hydraulics
SCV Function
I Rear Roller Lift
II Optional Scraper
Engine Horsepower Requirements
Machine Size Tractor Power
8 ft 150 hp Minimum
10 ft 175 hp Minimum
12 ft 200 hp Minimum
Engine horsepower requirements may vary
depending on soil conditions and digging depth.
In-Field Operation
Adjust operating speed
•
between 10 to 14 mph.
For headland turns, make skip
•
row passes at the desired
operating depth.
Adjust Operating Depth
1. Raise hitch, extend basket cylinders (B), and
set depth using cylinder stops.
2. Level machine by adjusting hitch link (A).
Machine Setting Fall Tillage Spring Tillage
Soil Deflector Storage Position (High Residue) Engaged Position (Low Residue)
B
Depth 3.5—4.5 in 2—3 in
A
Ensure a minimum of 6 to 8
•
inches overlap.
Raise the tool on pass to pass
•
turns using tractor hitch
controls.
IMPORTANT: Do not reverse machine in ground or damage may occur.
Activate tractor 3 pt hitch lock (if equipped) when transporting.
Copyright © 2018 Deere & Company. All Rights Reserved. THIS MATERIAL IS THE PROPERTY OF Deere & Company. ALL USE AND OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY Deere & Company IS PROHIBITED.
All information, illustrations, and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
QRG0812M01R (30NOV18)
Printed in U.S.A.
Soil Deector (Storage Position) Soil Deector (Engaged Position)