Specifications
|
|
|
|
|
|
|
Engine |
444J |
|
|
|
|
Manufacturer and Model . . . . . . . . . . . . . . . . . . . . |
John Deere PowerTech ETM 4045H |
|
|
|
|
Non-Road Emission Standards . . . . . . . . . . . . . . . . |
certified to EPA Tier 3 emissions |
|
|
|
|
Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
|
|
|
|
Valves Per Cylinder. . . . . . . . . . . . . . . . . . . . . . . . . |
2 |
|
|
|
|
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
276 cu. in. (4.5 L) |
|
|
|
|
Net Peak Power (ISO9249) . . . . . . . . . . . . . . . . . . . |
128 hp (95 kW) @ 2,000 rpm |
|
|
|
|
Net Peak Torque (ISO9249). . . . . . . . . . . . . . . . . . . |
380 lb.-ft. (515 Nm) @ 1,400 rpm |
|
|
|
|
Net Torque Rise . . . . . . . . . . . . . . . . . . . . . . . . . . . |
32% |
|
|
|
|
Fuel System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
high-pressure common rail |
|
|
|
|
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
full-flow spin-on filter and integral cooler |
|
|
|
|
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
turbocharged, charge air cooled |
|
|
|
|
Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
dual element dry type, restriction indicator in cab monitor for service |
|
|
|
|
Fan Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
hydraulically driven, proportionally controlled, fan aft of coolers |
|
|
|
|
Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . |
24 volt with 80-amp alternator |
|
|
|
|
Batteries (two 12 volt) . . . . . . . . . . . . . . . . . . . . . . |
950 CCA |
|
|
|
|
Transmission |
|
|
|
|
|
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
countershaft-type PowerShiftTM |
|
|
|
|
Torque Converter . . . . . . . . . . . . . . . . . . . . . . . . . . |
single stage, single phase |
|
|
|
|
Shift Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
electronically modulated, adaptive, load and speed dependent |
|
|
|
|
Operator Interface . . . . . . . . . . . . . . . . . . . . . . . . . |
steering-column or hydraulic joystick-mounted F-N-R and gear-select lever, kick-down button on hydraulic lever |
|||
|
Shift Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
quick-shift button with two selectable modes: auto/manual, auto to 1st or 2nd, kick down or kick down/up, three clutch cutoff settings adjustable |
|||
|
|
on switch pad |
|
|
|
|
Travel Speeds* |
Forward |
Reverse |
|
|
|
Gear 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4.5 mph (7.2 km/h) |
4.7 mph (7.6 km/h) |
|
|
|
Gear 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
7.7 mph (12.4 km/h) |
8.1 mph (13.0 km/h) |
|
|
|
Gear 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
14.9 mph (24.0 km/h) |
15.7 mph (25.3 km/h) |
|
|
|
Gear 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
23.4 mph (37.7 km/h) |
|
|
|
|
*Equipped with 17.5-25 tires. |
|
|
|
|
|
Axles/Brakes |
|
|
|
|
|
Final Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
heavy-duty mid-board planetary |
|
|
|
|
Differentials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
hydraulic locking front, conventional rear — standard; dual locking front and rear — optional |
|
|
|
|
Rear Axle Oscillation, Stop to Stop* . . . . . . . . . . . . |
24 deg. |
|
|
|
|
Brakes (conform to SAE J1473, ISO3450) |
|
|
|
|
|
Service Brakes . . . . . . . . . . . . . . . . . . . . . . . . |
hydraulically actuated, mid-board, self adjusting, wet multi-disc |
|
|
|
|
Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . . |
automatic spring applied, hydraulically released, oil cooled, multi-disc |
|
|
|
|
*Equipped with 17.5-25 tires. |
|
|
|
|
|
Tires |
|
|
|
|
|
Choice of (with three-piece rims) |
Tread Width |
Width Over Tires |
Change In Vertical Height |
|
|
17.5 R 25, L-3T. . . . . . . . . . . . . . . . . . . . . . . . |
74.8 in. (1900 mm) |
92.4 in. (2348 mm) |
0 in. (0 mm) |
|
|
17.5 R 25, L-2. . . . . . . . . . . . . . . . . . . . . . . . . |
74.8 in. (1900 mm) |
92.9 in. (2360 mm) |
– 0.1 in. (– 3 mm) |
|
|
17.5-25, 12 PR L-3 . . . . . . . . . . . . . . . . . . . . . |
74.8 in. (1900 mm) |
92.8 in. (2357 mm) |
+ 0.1 in. (+ 3 mm) |
|
|
17.5-25, L-2* . . . . . . . . . . . . . . . . . . . . . . . . . |
74.8 in. (1900 mm) |
92.8 in. (2357 mm) |
+ 0.1 in. (+ 3 mm) |
|
|
17.5-25, L-2 . . . . . . . . . . . . . . . . . . . . . . . . . . |
74.8 in. (1900 mm) |
92.8 in. (2357 mm) |
+ 0.1 in. (+ 3 mm) |
|
|
20.5-25, 12 PR L-2 . . . . . . . . . . . . . . . . . . . . . |
76.8 in. (1950 mm) |
98.1 in. (2492 mm) |
+ 3.6 in. (+ 91 mm) |
|
|
20.5-25, 1 Star L-2 Radial. . . . . . . . . . . . . . . . |
76.8 in. (1950 mm) |
97.7 in. (2482 mm) |
+ 2.6 in. (+ 67 mm) |
|
|
550/65 R 25, 1 Star L-2 . . . . . . . . . . . . . . . . . |
76.8 in. (1950 mm) |
98.0 in. (2490 mm) |
+ 1.0 in. (+ 27 mm) |
|
|
*Equipped with one-piece rims. |
|
|
|
|
Refill Capacities (U.S.)
Fuel Tank (with ground-level fueling) . . . . . . . . . . . 65 gal. (246 L)
Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 qt. (19 L)
Engine Oil with Vertical Spin-On Filter. . . . . . . . . . . 18.5 qt. (17.5 L)
PAGES
14–15
Refill Capacities (U.S.) (continued) |
444J |
|
PowerShift Transmission, Including Filter . . . . . . . . |
19.5 qt. (18.5 L) |
|
Differential (front and rear, each axle). . . . . . . . . . . |
23 qt. (22 L) |
|
Hydraulic Reservoir and Filters . . . . . . . . . . . . . . . . |
25.5 gal. (96.5 L) |
|
Wet-Disc Parking Brake . . . . . . . . . . . . . . . . . . . . . |
10 oz. (0.3 L) |
|
Hydraulic System/Steering |
|
|
Pump (loader and steering). . . . . . . . . . . . . . . . . . . |
variable-displacement, axial-piston pump; closed-center, pressure-compensating system |
|
Maximum Rated Flow . . . . . . . . . . . . . . . . . . . |
37 gpm (140 L/m) @ 1,000 psi (6895 kPa) |
|
System Relief Pressure (loader and |
|
|
steering) . . . . . . . . . . . . . . . . . . . . . . . . . . |
3,600 psi (24 821 kPa) |
|
Loader Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . |
two-function valve; singleor dual-lever controls; control lever lockout feature; optional thirdand fourth-function valve with auxiliary lever |
|
Steering (conforms to SAE J1511) |
|
|
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
power, fully hydraulic |
|
Articulation Angle . . . . . . . . . . . . . . . . . . . . . . |
80-deg. arc (40 deg. each direction) |
|
Hydraulic Cycle Times |
Standard Z-Bar |
High-Lift Z-Bar |
Raise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
5.6 sec. |
5.6 sec. |
Dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
1.0 sec. |
1.7 sec. |
Lower (float down) . . . . . . . . . . . . . . . . . . . . . |
2.4 sec. |
2.4 sec. |
Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
9.0 sec. |
9.7 sec. |
Maximum Lift Capacity. . . . . . . . . . . . . . . . . . . . . . |
with 2.0-cu.-yd. (1.5 m3) bucket with bolt-on edge |
|
Lift at Ground Level . . . . . . . . . . . . . . . . . . . . . |
22,403 lb. (10 162 kg) |
18,912 lb. (8578 kg) |
Lift at Maximum Height . . . . . . . . . . . . . . . . . . |
10,719 lb. (4862 kg) |
10,575 lb. (4797 kg) |
Turning Radius (measured to centerline of |
|
|
outside tire) . . . . . . . . . . . . . . . . . . . . . . . . . . . |
15 ft. 5 in. (4.70 m) |
15 ft. 5 in. (4.70 m) |
Dimensions with Pin-On Bucket |
|
|
|
Standard Z-Bar |
High-Lift Z-Bar |
A |
Height to Top of Cab and Canopy. . . . . . |
. . . . . . 10 ft. 5 in. (3.15 m) |
10 ft. 5 in. (3.15 m) |
B |
Height to Top of Exhaust . . . . . . . . . . . . |
. . . . . . 10 ft. 4 in. (3.14 m) |
10 ft. 4 in. (3.14 m) |
C |
Ground Clearance . . . . . . . . . . . . . . . . . |
. . . . . . 15.6 in. (396 mm) |
15.6 in. (396 mm) |
D |
Length from Centerline to Front Axle . . . |
. . . . . . 4 ft. 6 in. (1.37 m) |
4 ft. 6 in. (1.37 m) |
E |
Wheelbase . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . 9 ft. 0 in. (2.75 m) |
9 ft. 0 in. (2.75 m) |
F |
Dump Clearance . . . . . . . . . . . . . . . . . . |
. . . . . . ▲ (see page 17) |
▲ (see page 18) |
G |
Height to Hinge Pin, Fully Raised . . . . . . |
. . . . . . 11 ft. 10 in. (3.61 m) |
13 ft. 0 in. (3.96 m) |
H |
Dump Reach . . . . . . . . . . . . . . . . . . . . . |
. . . . . . ▲▲ (see page 17) |
▲▲ (see page 18) |
I |
Maximum Digging Depth. . . . . . . . . . . . |
. . . . . . 3.4 in. (86 mm) |
4.1 in. (104 mm) |
J |
Overall Length. . . . . . . . . . . . . . . . . . . . |
. . . . . . ▲▲▲ (see page 17) |
▲▲▲ (see page 18) |
K |
Maximum Rollback at Ground Level . . . |
. . . . . . 39 deg. |
39 deg. |
L |
Maximum Rollback, Boom Fully Raised . |
. . . . . . 55 deg. |
55 deg. |
M Maximum Bucket Angle, Fully Raised . . |
. . . . . . 50 deg. |
50 deg. |
|
|
L |
|
|
|
45˚ |
|
|
|
M |
|
|
|
|
H |
|
|
G |
|
|
|
F |
|
|
|
K |
|
|
|
I |
D |
C |
|
|
E |
Cab and Canopy
B A
J
444J LOADER WITH QUICK-COUPLER AND HOOK-ON BUCKET
444J LOADER WITH QUICK-COUPLER |
AND HOOK-ON CONSTRUCTION FORK |
PAGES |
16–17 |
Standard Z-Bar Pin-On |
|
Type Bucket Information |
444J |
|
General Purpose |
Bucket Type/Size |
w/Bolt-On Edge |
Capacity, Heaped SAE . . . . . . . . . . . . . . . . . . . |
2.5 cu. yd. (1.9 m3) |
Capacity, Struck SAE . . . . . . . . . . . . . . . . . . . . |
2.1 cu. yd. (1.6 m3) |
Bucket Weight . . . . . . . . . . . . . . . . . . . . . . . . . |
1,973 lb. (895 kg) |
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 ft. 4 in. (2.55 m) |
Breakout Force, SAE J732C . . . . . . . . . . . . . . . |
18,104 lb. (8212 kg) |
Tipping Load, Straight . . . . . . . . . . . . . . . . . . . |
20,554 lb. (9323 kg) |
Tipping Load, 40-Deg. Full Turn . . . . . . . . . . . . |
18,263 lb. (8284 kg) |
Reach, 45-Deg. Dump, 7-ft. (2.13 m) |
|
Clearance . . . . . . . . . . . . . . . . . . . . . . . . . |
4 ft. 8 in. (1.42 m) |
▲▲ Reach, 45-Deg. Dump, Full Height. . . . . . . . . . |
3 ft. 4 in. (1.02 m) |
▲ Dump Clearance, 45 Deg., Full Height . . . . . . . |
8 ft. 9 in. (2.67 m) |
▲▲▲ Overall Length, Bucket on Ground . . . . . . . . . . |
22 ft. 2 in. (6.76 m) |
Loader Clearance Circle, Bucket In Carry |
|
Position . . . . . . . . . . . . . . . . . . . . . . . . . . |
36 ft. 3 in. (11.05 m) |
Operating Weight. . . . . . . . . . . . . . . . . . . . . . . |
24,561 lb. (11 141 kg) |
Loader operating information is based on machine with standard equipment; cab; rear cast bumper/counterweight; 17.5 R 25 tires; ROPS cab; 175-lb. (79 kg) operator; and full fuel tank. This information is affected by tire size, ballast, and different attachments.
Adjustments to Operating Weights with Standard Z-Bar Pin-On Buckets
Adjustments to operating weights and tipping loads for 2.5-cu.-yd. (1.9 m3) general-purpose bucket with bolt-on cutting edge and optional rear cast bumper/counterweight
Add (+) or deduct (–) lb. (kg) as indicated for |
|
|
Tipping Load, 40- |
|
loaders with three-piece rims and |
Operating Weight |
Tipping Load, Straight |
Deg. Full Turn, SAE |
|
17.5 |
R 25, L-3T tires . . . . . . . . . . . . . . . . . . . . |
0 lb. (0 kg) |
0 lb. (0 kg) |
0 lb. (0 kg) |
17.5 |
R 25, L-2 tires . . . . . . . . . . . . . . . . . . . . . |
– 196 lb. (– 89 kg) |
– 141 lb. (– 64 kg) |
– 138 lb. (– 63 kg) |
17.5 |
R 25, 12 PR L-3 tires. . . . . . . . . . . . . . . . |
– 426 lb. (– 193 kg) |
– 302 lb. (– 137 kg) |
– 300 lb. (– 136 kg) |
17.5-25, L-2 tires* . . . . . . . . . . . . . . . . . . . . . |
– 625 lb. (– 283 kg) |
– 445 lb. (– 202 kg) |
– 441 lb. (– 200 kg) |
|
17.5-25, L-2 tires . . . . . . . . . . . . . . . . . . . . . . |
– 364 lb. (– 165 kg) |
– 258 lb. (– 117 kg) |
– 256 lb. (– 116 kg) |
|
20.5-25, 12 PR L-2 tires**. . . . . . . . . . . . . . . . |
+ 328 lb. (+ 149 kg) |
+ 256 lb. (+ 116 kg) |
+ 251 lb. (+ 114 kg) |
|
20.5-25, 1 Star L-2 Radial tires** . . . . . . . . . . |
+ 514 lb. (+ 240 kg) |
+ 388 lb. (+ 176 kg) |
+ 381 lb. (+ 173 kg) |
|
550/65 R 25, 1 Star L-2 tires** . . . . . . . . . . . . |
+ 443 lb. (+ 201 kg) |
+ 337 lb. (+ 153 kg) |
+ 333 lb. (+ 151 kg) |
|
CaCl2 in 17.5-25 rear tires** . . . . . . . . . . . . . . |
+ 1,184 lb. (+ 537 kg) |
+ 1,684 lb. (+ 764 kg) |
+ 1,486 lb. (+ 674 kg) |
|
Optional rear cast bumper/counterweight |
|
|
|
|
|
(removed) . . . . . . . . . . . . . . . . . . . . . . . . . |
– 229 lb. (– 104 kg) |
– 461 lb. (– 209 kg) |
– 368 lb. (– 176 kg) |
*Equipped with one-piece rims. |
|
|
|
**CaCl2 not recommended with 20.5 R2 5, 20.5-25, and 65 R 25 tires.
Standard Z-Bar Information with Quick-Coupler and Hook-On Bucket
|
General Purpose |
General Purpose |
Bucket Type/Size |
w/Bolt-On Edge |
w/Bolt-On Edge |
Capacity, Heaped SAE . . . . . . . . . . . . . . . . . . . |
2.5 cu. yd. (1.9 m3) |
2.0 cu. yd. (1.5 m3) |
Capacity, Struck SAE . . . . . . . . . . . . . . . . . . . . |
2.1 cu. yd. (1.6 m3) |
1.6 cu. yd. (1.2 m3) |
Bucket Weight (with coupler) . . . . . . . . . . . . . . |
2,756 lb. (1250 kg) |
2,654 lb. (1204 kg) |
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 ft. 4 in. (2.55 m) |
8 ft. 4 in. (2.55 m) |
Breakout Force, SAE J732C . . . . . . . . . . . . . . . |
14,762 lb. (6696 kg) |
15,765 lb. (7151 kg) |
Tipping Load, Straight . . . . . . . . . . . . . . . . . . . |
18,541 lb. (8410 kg) |
18,309 lb. (8305 kg) |
Tipping Load, 40-Deg. Full Turn, SAE . . . . . . . . |
16,395 lb. (7437 kg) |
16,398 lb. (7348 kg) |
Reach, 45-Deg. Dump, 7-ft. (2.13 m) |
|
|
Clearance . . . . . . . . . . . . . . . . . . . . . . . . . |
4 ft. 11 in. (1.49 m) |
4 ft. 10 in. (1.46 m) |
▲▲ Reach, 45-Deg. Dump, Full Height. . . . . . . . . . |
3 ft. 10 in. (1.16 m) |
3 ft. 8 in. (1.11 m) |
▲ Dump Clearance, 45 Deg., Full Height . . . . . . . |
8 ft. 4 in. (2.54 m) |
8 ft. 6 in. (2.58 m) |
▲▲▲ Overall Length, Bucket on Ground . . . . . . . . . . |
22 ft. 10 in. (6.96 m) |
22 ft. 7 in. (6.88 m) |
Loader Clearance Circle, Bucket In Carry |
|
|
Position . . . . . . . . . . . . . . . . . . . . . . . . . . |
39 ft. 9 in. (12.12 m) |
36 ft. 6 in. (11.13 m) |
Operating Weight. . . . . . . . . . . . . . . . . . . . . . . |
25,386 lb. (11 515 kg) |
25,283 lb. (11 486 kg) |
Loader operating information is based on machine with standard equipment; cab; rear cast bumper/counterweight; 17.5 R 25 tires; ROPS cab; 175-lb. (79 kg) operator; and full fuel tank. This information is affected by tire size, ballast, and different attachments.
Standard Z-Bar Information with Quick- |
|
|
Coupler and Hook-On Construction Fork |
444J |
|
▲ Tine Length . . . . . . . . . . . . . . . . . . . . . . . . . . . |
48 in. (1.22 m) |
60 in. (1.52 m) |
▲▲ Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . |
24 ft. 4 in. (7.42 m) |
25 ft. 4 in. (7.72 m) |
Tipping Load, Straight (fork level, load |
|
|
centered 24 in. [610 mm] forward |
|
|
on tine). . . . . . . . . . . . . . . . . . . . . . . . . . . |
13,693 lb. (6211 kg) |
12,696 lb. (5759 kg) |
Tipping Load, 40-Deg. Full Turn (fork |
|
|
level, load centered 24 in. [610 mm] |
|
|
forward on tine) . . . . . . . . . . . . . . . . . . . . |
12,144 lb. (5508 kg) |
11,228 lb. (5093 kg) |
Operating Weight. . . . . . . . . . . . . . . . . . . . . . . |
24,787 lb. (11 243 kg) |
25,122 lb. (11 395 kg) |
High-Lift Z-Bar Pin-On-Type Bucket Information |
|
|
|
General Purpose |
|
Bucket Type/Size |
w/Bolt-On Edge |
|
Capacity, Heaped SAE . . . . . . . . . . . . . . . . . . . |
2.5 cu. yd. (1.9 m3) |
|
Capacity, Struck SAE . . . . . . . . . . . . . . . . . . . . |
2.1 cu. yd. (1.6 m3) |
|
Bucket Weight . . . . . . . . . . . . . . . . . . . . . . . . . |
1,973 lb. (894 kg) |
|
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 ft. 4 in. (2.55 m) |
|
Breakout Force, SAE J732C . . . . . . . . . . . . . . . |
16,655 lb. (7555 kg) |
|
Tipping Load, Straight . . . . . . . . . . . . . . . . . . . |
17,469 lb. (7924 kg) |
|
Tipping Load, 40-Deg. Full Turn, SAE . . . . . . . . |
15,483 lb. (7023 kg) |
|
Reach, 45-Deg. Dump, 7-ft. (2.13 m) |
|
|
Clearance . . . . . . . . . . . . . . . . . . . . . . . . . |
5 ft. 9 in. (1.76 m) |
|
▲▲ Reach, 45-Deg. Dump, Full Height. . . . . . . . . . |
3 ft. 5 in. (1.05 m) |
|
▲ Dump Clearance, 45 Deg., Full Height . . . . . . . |
10 ft. 0 in. (3.05 m) |
|
▲▲▲ Overall Length, Bucket on Ground . . . . . . . . . . |
23 ft. 5 in. (7.14 m) |
|
Loader Clearance Circle, Bucket In Carry |
|
|
Position . . . . . . . . . . . . . . . . . . . . . . . . . . |
37 ft. 5 in. (11.40 m) |
|
Operating Weight. . . . . . . . . . . . . . . . . . . . . . . |
24,809 lb. (11 253 kg) |
|
Loader operating information is based on machine with standard equipment; cab; rear cast bumper/counterweight; 17.5 R 25 tires; ROPS cab; 175-lb. (79 kg) operator; and full fuel tank. This information is affected by tire size, ballast, and different attachments.
Adjustments to Operating Weights with High-Lift Z-Bar Pin-On Buckets
Adjustments to operating weights and tipping loads for 2.5-cu.-yd. (1.9 m3) general-purpose bucket with bolt-on cutting edge and optional rear cast bumper/counterweight
Add (+) or deduct (–) lb. (kg) as indicated for |
|
|
Tipping Load, 40- |
|
loaders with three-piece rims and |
Operating Weight |
Tipping Load, Straight |
Deg. Full Turn, SAE |
|
17.5 |
R 25, L-3T tires . . . . . . . . . . . . . . . . . . . . |
0 lb. (0 kg) |
0 lb. (0 kg) |
0 lb. (0 kg) |
17.5 |
R 25, L-2 tires . . . . . . . . . . . . . . . . . . . . . |
– 196 lb. (– 89 kg) |
– 121 lb. (– 55 kg) |
– 119 lb. (– 54 kg) |
17.5 |
R 25, L-3 tires . . . . . . . . . . . . . . . . . . . . . |
– 425 lb. (– 193 kg) |
– 262 lb. (– 119 kg) |
– 260 lb. (– 118 kg) |
17.5-25, L-2 tires* . . . . . . . . . . . . . . . . . . . . . |
– 624 lb. (– 283 kg) |
– 386 lb. (– 175 kg) |
– 384 lb. (– 174 kg) |
|
17.5-25, L-2 tires . . . . . . . . . . . . . . . . . . . . . . |
– 362 lb. (– 164 kg) |
– 223 lb. (– 101 kg) |
– 220 lb. (– 100 kg) |
|
20.5-25, 12 PR L-2 tires**. . . . . . . . . . . . . . . . |
+ 331 lb. (+ 150 kg) |
+ 223 lb. (+ 101 kg) |
+ 218 lb. (+ 99 kg) |
|
20.5-25, 1 Star L-2 Radial tires** . . . . . . . . . . |
+ 516 lb. (+ 234 kg) |
+ 337 lb. (+ 153 kg) |
+ 331 lb. (+ 150 kg) |
|
550/65 R 25, 1 Star L-2 tires** . . . . . . . . . . . . |
+ 443 lb. (+ 201 kg) |
+ 293 lb. (+ 133 kg) |
+ 289 lb. (+ 131 kg) |
|
CaCl2 in 17.5-25 rear tires** . . . . . . . . . . . . . . |
+ 1,183 lb. (+ 537 kg) |
+ 1,462 lb. (+ 663 kg) |
+ 1,291 lb. (+ 586 kg) |
|
Optional rear cast bumper/counterweight |
|
|
|
|
|
(removed) . . . . . . . . . . . . . . . . . . . . . . . . . |
– 229 lb. (– 104 kg) |
– 461 lb. (– 209 kg) |
– 368 lb. (– 176 kg) |
*Equipped with one-piece rims. |
|
|
|
**CaCl2 not recommended with 20.5 R 25, 20.5-25, and 65 R 25 tires.
PAGES
18–19
High-Lift Z-Bar Information with |
|
|
Quick-Coupler and Hook-On Bucket |
444J |
|
|
General Purpose |
General Purpose |
Bucket Type/Size |
w/Bolt-On Edge |
w/Bolt-On Edge |
Capacity, Heaped SAE . . . . . . . . . . . . . . . . . . . |
2.5 cu. yd. (1.9 m3) |
2.0 cu. yd. (1.5 m3) |
Capacity, Struck SAE . . . . . . . . . . . . . . . . . . . . |
2.1 cu. yd. (1.6 m3) |
1.6 cu. yd. (1.2 m3) |
Bucket Weight (with coupler) . . . . . . . . . . . . . . |
2,756 lb. (1250 kg) |
2,575 lb. (1168 kg) |
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 ft. 4 in. (2.55 m) |
8 ft. 4 in. (2.55 m) |
Breakout Force, SAE J732C . . . . . . . . . . . . . . . |
13,552 lb. (6147 kg) |
14,502 lb. (6578 kg) |
Tipping Load, Straight . . . . . . . . . . . . . . . . . . . |
15,652 lb. (7100 kg) |
16,071 lb. (7290 kg) |
Tipping Load, 40-Deg. Full Turn, SAE . . . . . . . . |
13,785 lb. (6253 kg) |
14,118 lb. (6404 kg) |
Reach, 45-Deg. Dump, 7-ft. (2.13 m) |
|
|
Clearance . . . . . . . . . . . . . . . . . . . . . . . . . |
5 ft. 11.5 in. (1.82 m) |
5 ft. 11 in. (1.80 m) |
▲▲ Reach, 45-Deg. Dump, Full Height. . . . . . . . . . |
3 ft. 10 in. (1.18 m) |
3 ft. 9 in. (1.14 m) |
▲ Dump Clearance, 45 Deg., Full Height . . . . . . . |
9 ft. 7 in. (2.91 m) |
9 ft. 9 in. (2.96 m) |
▲▲▲ Overall Length, Bucket on Ground . . . . . . . . . . |
24 ft. 1 in. (7.34 m) |
23 ft. 10 in. (7.26 m) |
Loader Clearance Circle, Bucket In Carry |
|
|
Position . . . . . . . . . . . . . . . . . . . . . . . . . . |
37 ft. 11 in. (11.56 m) |
37 ft. 8 in. (11.48 m) |
Operating Weight. . . . . . . . . . . . . . . . . . . . . . . |
25,635 lb. (11 628 kg) |
25,474 lb. (11 555 kg) |
Loader operating information is based on machine with standard equipment; cab; rear cast bumper/counterweight; 20.5R25 tires; ROPS cab; 175-lb. (79 kg) operator; and full fuel tank. This information is affected by tire size, ballast, and different attachments.
High-Lift Z-Bar Information with Quick-Coupler and Hook-On Construction Fork
. . . . . . . . . . . . . . . . . . . . . . . . . . .▲ Tine Length |
48 in. (1.22 m) |
60 in. (1.52 m) |
▲▲ Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . |
25 ft. 5 in. (7.75 m) |
26 ft. 5 in. (8.05 m) |
Tipping Load, Straight (fork level, load |
|
|
centered24 in. [610 mm] forward |
|
|
on tine). . . . . . . . . . . . . . . . . . . . . . . . . . . |
12,238 lb. (5551 kg) |
11,949 lb. (5420 kg) |
Tipping Load, 40-Deg. Full Turn (fork |
|
|
level, load centered 24 in. [610 mm] |
|
|
forward on tine) . . . . . . . . . . . . . . . . . . . . |
10,822 lb. (4909 kg) |
10,533 lb. (4778 kg) |
Operating Weight. . . . . . . . . . . . . . . . . . . . . . . |
25,037 lb. (11 357 kg) |
25,363 lb. (11 504 kg) |
Standard Z-Bar Pin-On Bucket Selection Guide*
|
5.00 |
|
|
|
|
|
|
|
|
|
|
|
(3.8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
N |
|
|
|
|
|
|
|
|
|
|
C |
o |
|
|
|
|
|
|
|
|
|
|
r |
|
M |
|
|
|
|
|||
|
|
o |
m |
|
|
|
|
||||
|
|
|
a |
|
|
|
|
||||
|
|
n |
|
a |
|
|
|
|
|
||
|
|
s |
|
|
x |
|
|
|
|
||
|
4.00 |
|
|
l |
|
i |
|
|
|
|
|
|
e |
|
|
L |
m |
|
|
|
|||
|
r |
|
o |
|
|
|
|||||
|
v |
|
|
u |
|
|
|
||||
|
(3.0) |
|
a |
|
|
a |
m |
|
|
|
|
|
|
|
|
d |
|
|
|
||||
|
|
t |
|
|
|
|
|
|
|||
|
|
i |
|
|
|
|
L |
|
|
|
|
|
|
v |
|
|
|
|
|
|
|
||
3) |
|
|
e |
|
|
o |
|
|
|
||
|
|
|
L |
|
|
a |
|
|
|
||
(m |
|
|
|
|
|
d |
|
|
|
||
|
|
|
|
o |
|
|
|
|
|
|
|
|
|
|
|
a |
|
|
|
|
|
|
|
|
|
|
|
d |
|
|
|
|
|
||
cu. yd. |
3.00 |
|
|
|
|
|
|
|
|
|
|
SIZE |
(2.3) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Deere 2.5-cu.-yd. (1.9 m3) |
|
|
|
||||
BUCKET |
|
|
|
|
|
|
|
||||
|
|
|
|
General-Purpose Bucket |
|
|
|
||||
2.00 |
|
|
|
|
|
|
|
|
|
|
|
|
(1.5) |
|
|
|
|
|
|
|
|
|
|
|
lb./cu. yd. |
1,500 |
|
|
2,000 |
2,500 |
3,000 |
3,500 |
|||
|
kg/m3 |
600 |
|
|
900 |
|
1200 |
1500 |
1800 |
2100 |
MATERIAL (Loose weight) |
lb./cu. yd. |
kg/m3 |
Caliche |
2,100 |
1250 |
Cinders |
1,000 |
590 |
Clay and gravel, dry |
2,400 |
1420 |
Clay and gravel, wet |
2,600 |
1540 |
Clay,dry |
2,500 |
1480 |
Clay,natural bed |
2,800 |
1660 |
Clay,wet |
2,800 |
1660 |
Coal, anthracite, broken |
1,850 |
1100 |
Coal, bituminous, broken |
1,400 |
830 |
Earth, dry, packed |
2,550 |
1510 |
Earth, loam |
2,100 |
1250 |
Earth, wet, excavated |
2,700 |
1600 |
Granite, broken or large crushed |
2,800 |
1660 |
Gravel, dry |
2,550 |
1510 |
Gravel, dry 1/2" to 2" (13 to 50 mm) |
2,850 |
1690 |
Gravel, pit run (graveled sand) |
3,250 |
1930 |
Gravel, wet 1/2" to 2" (13 to 50 mm) |
3,400 |
2020 |
Gypsum, crushed |
2,700 |
1600 |
Limestone, broken or crushed |
2,600 |
1540 |
Magnetite, iron ore |
4,700 |
2790 |
Phosphate rock |
2,160 |
1280 |
Pyrite, iron ore |
4,350 |
2580 |
Sand and gravel, dry |
2,900 |
1720 |
Sand and gravel, wet |
3,400 |
2020 |
Sand, dry |
2,400 |
1420 |
Sand, wet |
3,100 |
1840 |
Sandstone, broken |
2,550 |
1510 |
Shale |
2,100 |
1250 |
Slag, broken |
2,950 |
1750 |
Stone, crushed |
2,700 |
1600 |
Topsoil |
1,600 |
950 |
*This guide, representing bucket sizes not necessarily manufactured by Deere, will help you in selecting proper bucket size for material density, loader configuration, and operating conditions. Optimum bucket size is determined after adding or subtracting all tipping load changes due to optional equipment. The “conservative load” line on this guide is recommended when operating in conditions such as soft ground and unlevel surfaces. The “maximum
load” condition on this guide is sometimes utilized when operating on firm ground and level surfaces.