Page 1
DVD PLAYER WITH
DELUXE SOUND
–If Equipped
The DVD player is a selectable
function of the multi-featured audio
system. The player unit contains DVD/
CD/MP3/AM-FM stereo radio. It also
accepts portable audio player inputs and
it also functions as an alarm clock.
The DVD player is connected
directly to the TV (on Model 25R) or
connected to an A/V distribution system
(on Model 25T) and can output sound to
either the stereo speakers in the TV or to
the Deluxe Sound speakers in the lounge
area of the coach.
NOTE: The coach must have 120-volt
power (power cord, generator,
or inverter) to power A/C
distribution system to be able to
use the DVD player.
See the audio player manufacturer’s
information in your InfoCase for
complete feature descriptions and
operating instructions.
Connect Deluxe Sound
Speakers
• Press the Speaker
switch to TV position
to connect speakers to
TV and DVD. Speaker
switch is located near
the DVD player.
Set TV Video Input
• Turn TV and DVD player On.
• Press the MODE button on the TV or
the SOURCE button on the remote to
select “INPUT 1.”
• The TV screen
will display
the DVD
player logo
when the
correct input is selected.
Play DVD
• Insert a DVD “face up” into slot on
lower face of the player.
• The DVD will begin to “load”
automatically. The TV screen will
typically display “READING” or
“LOADING.”
• The DVD may load directly
to the main title/menu screen
or it may begin to play
previews. Y ou may be able to
skip previews if desired by
pressing the “NEXT” button on the
DVD remote until you see the main
menu screen.
• When the main
menu screen
appears, press
the ENTER
button on the
remote or
“Play/Pause”
button on
DVD player to begin playing the
main feature. Use the arrow buttons
on the DVD remote to select another
feature to play .
• Volume is adjusted with the DVD
remote.
TV Sound through Deluxe
Sound Speakers
When watching TV programs alone,
the TV normally plays sound through its
own built-in stereo speakers. If you wish
to connect TV stereo sound output to the
Deluxe Sound speakers for a richer
sound quality, follow these steps:
• Press the Speaker switch to TV
position to connect speakers to DVD
player.
• Turn the TV On.
• Press the AUX input
selection button just
below the display on
the face of the DVD
player. This will route the TV stereo
Continued—
Page 2
Audio-Video System
Basic Operation
Guide
Part No. 161501-10-009
Rev. 1002091005
Copyright 2009 Winnebago Industries, Inc.
All rights reserved.
NOTE: See your InfoCase for specific
operating guides for audio and
video components.
sound output through the DVD
player and out to the Deluxe Sound
speakers.
• Select TV channels and adjust
volume using the TV remote.
Loading...