Jensen KT4098 User Manual

OPTIC A L M O U S E

©1976, 2009 Sanrio Co.,Ltd.

COMPLIANCE WITH FCC REGULATIONS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may
cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

and

KT4098

USER MANUAL

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE
OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE
REFERENCE

FUNCTIONS AND CONTROLS

Scroll wh eel

Left ke y

cord le ng th about 54 in ches

Rig ht k ey

Optic al s ensor

USB plug

USB to PS/2 adaptor

LED ON/O FF BUT TON

Slide to ON position,
the cheek’s LED of the
Hello Kitty will light

ON OF F

OPERATING INSTRUCTIONS

A.Installation

1. Insert the USB Plug of the Optical Mouse directly into a USB port of your computer
running on either Windows or Mac OS.

2. Your mouse will be automatically installed by the plug and play function of Windows
or Mac OS.

3. If you want to use the mouse on the PS/2 port of your PC instead, please make sure
you have turned off your PC before doing so. Then use the included USB to PS/2
adaptor to make the correct connection. After turning on your PC again, the mouse
driver will be automatically installed and ready to use.

4. Compatible OS: Windows ME/2000/XP/Vista and Mac OS X 10.5 or below.

B.Scroll Wheel Operation

1. Under normal operation, turn the Scroll Wheel for fast browsing up/down on the Internet
and in Windows documents.

2. To enable smooth auto scrolling, press
the Scroll Wheel Button. A double arrow
icon showing the anchor point and a
floating arrow icon showing the current
mouse position will appear.

3. To scroll up/down, move the mouse until
the floating arrow icon becomes an up/down
arrow. The farther away the floating arrow
from the anchor point, the faster is the scrolling speed.

C.Cleaning Your Mouse

1. Turn off your computer and unplug your mouse from the PS2 or USB port.

2. Turn it upside down. Clean the Optical Sensor carefully with a lint-free cloth. Dust or
dirt may affect its performance.

3. Also clean out dust or dirt accumulated inside the scroll wheel compartment to assure
smooth rotation of the Scroll Wheel.

4. Clean the connecting cable and top cabinet of your mouse with a damp (never wet)
cloth. Mild cleaning agent specially formulated for cleaning mouse or keyboard may be
used. However, solvent or detergent should never be used.

90 Day Limited Warranty and Service
(Valid in the U.S.A. Only)

SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from

defective materials or factory workmanship for a period of 90 days from the date of original

customer purchase and provided the product is utilized within the U.S.A. This warranty is
not assignable or transferable. Our obligation under this warranty is the repair or
replacement of the defective unit or any part thereof, except batteries, when it is returned
to the SPECTRA Service Department, accompanied by proof of the date of original
consumer purchase, such as a duplicated copy of a sales receipt.

You must pay all shipping charges required to ship the product to SPECTRA for warranty

service. If the product is repaired or replaced under warranty, the return charges will be
at SPECTRA's expense. There are no other express warranties other than those stated
herein.

This warranty is valid only in accordance with the conditions set forth below:

1.The warranty applies to the SPECTRA product only while:
a. It remains in the possession of the original purchaser and proof of purchase is
demonstrated.
b. It has not been subjected to accident, misuse, abuse, improper service, usage outside
the descriptions and warnings covered within the user manual or non-SPECTRA
approved modifications.
c. Claims are made within the warranty period.

2.This warranty does not cover damage or equipment failure caused by electrical wiring
not in compliance with electrical codes or SPECTRA user manual specifications, or
failure to provide reasonable care and necessary maintenance as outlined in the user
manual.

3.Warranty of all SPECTRA products applies to residential use only and is void when
products are used in a nonresidential environment or installed outside the United States.

This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. TO OBTAIN SERVICE please remove all batteries (if any) and
pack the unit carefully and send it prepaid by insured parcel post or UPS to SPECTRA
at the address shown below. IF THE UNIT IS RETURNED WITHIN THE WARRANTY
PERIOD shown above, please include a proof of purchase (dated cash register receipt)
so that we may establish your eligibility for warranty service and repair of the unit without

cost. Also include a note with a description explaining how the unit is defective. A customer

service representative may need to contact you regarding the status of your repair, so
include your name, address, phone number and e-mail address to speed the process.

IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for

$10.00 to cover the cost of repair, handling and return postage. All out of warranty returns

must be sent prepaid.

It is recommended that you contact SPECTRA first at 1-800-777-5331 or by e-mail at
[e-mail] for updated information on the unit requiring service. In some
cases the model you have may be discontinued and SPECTRA reserves the right to
offer alternative options for repair or replacement.

SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North Normandy Avenue,
Chicago, IL 60634, USA.
1-800-777-5331

To register your product, visit the link below to enter your information.
http://www.spectraintl.com/wform.htm

Printed in China