Jensen JSCR-75 Instruction Manual

CASSETTE PLAYER WITH MP3 ENCODER

INSTRUCTION MANUAL

JSCR-75

PLEASE READ THIS INSTRUCTION MANUAL COMPLETELY

BEFORE OPERATING THIS UNIT AND RETAIN IT FOR

FUTURE REFERENCE.

FEATURES

●

Rediscover your old cassette tapes on the go.

●

Convert your old mix tapes and cassettes to MP3 and play them back on any MP3 player,

or burn them to a CD.

●

The portable design is easy to carry and enables you to play and transfer almost

anywhere.

●

Flexible battery or USB-powered operation.

●

Includes Tape Converter software to guide you through the transfer.

●

Audio output enables you to listen on your stereo, head phones or other speaker

systems.

FUNCTIONS OF CONTROLS

1.

EJECT: Slide this switch to open the cassette door/holder.

2.

VOLUME: Adjusts the volume of the headphones and USB connection.

3.

HEADPHONE JACK: Connect 3.5mm headphones here.

4.

USB port: Use the included USB cable to connect the Cassette Player to your computer

in order to transfer audio. We have provided a software package on the included CD to

aid in this process.

5.

STOP: Press to stop the tape.

6.

FAST FORWARD: Press to fast forward the tape.

7.

REWIND: Press to rewind the tape.

8.

PLAY: Press to play the tape.

2

POWER SOURCE

This Cassette Player is designed to operate on 2 x 1.5V ‘AA’ (UM-3) batteries (not included)

or power up by PC when connected to the USB port of a PC.

BATTERY INSTALLATION

1. Open the Cassette Door by sliding EJECT downwards.

2. Press and lift up the Battery Door in the direction as shown on the Battery Door.

3. Insert 2 ‘AA’ batteries, according to the polarity on Cassette Compartment, into the

battery compartment and replace the Battery Door.

IMPORTANT:

Be sure that the batteries are installed correctly.

Wrong polarity may damage the unit and void the warranty.

For best performance and longer operating time, we recommend the use of

good quality alkaline-type batteries.

CAUTION

1. Do not mix old and new batteries.

2. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

3. If the unit is not to be used for an extended period of time, remove the battery. Old or leaking

battery can cause damage to the unit and may void the warranty.

4. Do not dispose of batteries in fire, batteries may explode or leak.

BATTERY REPLACEMENT

When the output sound of this unit becomes distorted or the CD player operation appears
unstable, the batteries are weak. You need to replace all the exhausted batteries at the same
time as soon as possible to avoid battery leakage.

SOFTWARE INSTALLATION

1.

Insert the Quickstart CD into your computer’s CD-ROM drive.

Note: If a warning message pops up asking you to give permission, click “Yes” or “Allow”. If

nothing pops-up automatically, see the FAQ section.

2.

Click the “Next” button. If you want to change the destination folder, click the “Browse”

button, make a selection and then click “OK”.

3