Jensen JiPS-310i User Manual

DOCKING SPEAKER STATION

for

iPod, iPhone and iPad

JiPS-310i

USER MANUAL

(iPod/iPhone/iPad not Included)

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING
THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

DEAR JENSEN® CUSTOMER

Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical
enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers.
This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get
the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of soun d. So what
sounds "normal" can actually be loud and harmful to your hearing. Guard against this by setting your
equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

 Start your volume control at a low setting.
 Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.

We Want You Listening For a Lifetime

Used wisely, your new sound equipment will provide a lifetime of
fun and enjoyment. Since hearing damage from loud noise is often
undetectable until it is too late, this manufacturer and the
Electronic Industries Association's Consumer Electronics Group
recommend you avoid prolonged exposure to excessive noise.

Customer's Record:

The serial number of this product is found on its bottom. You should note the serial number of this unit in the
space provided as a permanent record of your purchase to aid in identification in the event of theft of loss.

Model Number: JiPS-310i Serial Number: ____________________

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to e nsure your personal
safety. However, improper use can result in potential electrical shock or fire hazards. Please read all
safety and operating instructions carefully before installation and use, and k eep these instructions han dy for
future reference. Take special note of all warnings listed in these instructions and on the unit.

1. Read these instructions – All the safety and operating instructions should be read before the applianc e
is operated.

2. Keep these instructions – The safety and operating instructions should be kept for future reference.

3. Heed all warnings – All warnings on the appliance and in the operating instructions sh ould be adhered
to.

4. Follow all instructions – All operation and use instructions should be followed.

5. Do not use this apparatus near water – The appliance should not be used near water; for example, near
a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

6. Clean only with dry cloth – The appliance should be cleaned only as recommended by the
manufacturer.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The
appliance should be situated so that its location or position does not interfere with its proper ventilation.
For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block
the ventilation openings; or placed in a built-in install ation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenien ce recept acles,
and the point where they exit from the apparatus.

10. Only use attachments / accessories specified by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to qualified service personnel. Servicing is require d when the apparatus has been
damaged in any way, such as power-supply cord or plug is dama ged, liqu id has been sp illed or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

13. T his appliance shall not be exposed to drippi ng or splashing water and that no object filled with liquids
such as vases shall be placed on the apparatus.

JiPS-310i User Manual (English), P.1

14. Power Sources – The appliance should be connect ed to a power supply only of the type described in
the operating instructions or as marked on the appliance. Do not overload wall outlet.

15. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

16. Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, seek advice from your
local qualified service technician or contact the distributor via the te lephone number at the back of this
instruction manual.

17. Caution marking and nameplate are located on bottom of product.

COMPLIANCE WITH FCC REGULATIONS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired

operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to prov ide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

PROTECT YOUR FURNITURE

This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the
controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any
marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives,
or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture.
To prevent any damage to your furniture we strongly recom mend that you purch ase small self-adhesive felt
pads, available at hardware stores and home improvement centers everywhere, and appl y th ese pads to the
bottom of the rubber 'feet' before you place the product on fine wooden furniture.

PRECAUTIONS AND IMPORTANT NOTES

PRECAUTIONS

 Do not connect the AC Adaptor to the unit and mains before checking the mains voltage.
 Do not cover any vents and make sure that there is a space of several inches around the unit for

ventilation.

 This unit is not magnetically shielded and may cause color distortion on the screen of some CRT TVs or

video monitors. To avoid this, you may need to move the unit further away from the TV or monitor if
abnormal color shifts or image distortion occurs.

IMPORTANT NOTES

 For best iPad display clarity, avoid operating the unit in direct sunlight or under bright lights.

Avoid installing the unit in locations described below:

 Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
 Places subject to constant vibration.
 Dusty, humid or moist places.
 Sources of electrical noise such as fluo rescent la mp s or moto rs.

JiPS-310i User Manual (English), P.2

LOCATION OF CONTROLS

请换用面板配置银环

装饰的线图

JiPS-310i User Manual (English), P.3