Jensen JiPS-200i User Manual

DOCKING SPEAKER SYSTEM FOR iPad, iPhone and iPod

USER MANUAL

JiPS-200i

(iPod/iPhone/iPad Not Included)

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE
OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR

1

DEAR JENSEN® CUSTOMER

Selecting fine audio equipment such as the unit you've just purchased is only the start
of your musical enjoyment. Now it's time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the Electronic Industries
Association's Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affect

ing your
sensitive hearing. Sound can be deceiving. Over time your hearing "comfort level"
adapts

to higher volumes of sound. So what sounds "normal" can actually be loud and
harmful to your hearing. Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.

To establish a safe level:

Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and clearly, and without

distortion.

Once you have established a comfortable sound level:

Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.

We Want You Listening For a Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.
Since hearing damage from loud noise is often undetectable until it is too late, this
manufacturer and the Electronic Industries Association's Consumer Electronics Group
recommend you avoid prolonge

d exposure to excessive noise.

Customer's Record:

The serial number of this product i

s found on its back cover. You should note the serial
number of this unit in the space provided as a permanent record of your purchase to aid
in identification in the event of theft of loss.

Model Number: JiPS-200i Serial Number:

2

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to
ensure your personal safety. However, improper use can result in potential electrical
shock or fire hazards. Please read all safety and operating instructions carefully before
installation and use, and keep these instructions handy for future reference. Take
special note of all warnings listed in these instructions and on the unit.

1. Read these instructions – All the safety and operating inst

ructions should be read

before the appliance is operated.

2. Keep these instructions – The safety and operating instructions should be kept for
future reference.

3. Heed all warnings – All wa

rnings on the appliance and in the operating

instructions should be adhered to.

4. Follow all instructions – All operation and use instructions should be followed.

5. Do not use this apparatus near water – The appliance should not be used near
water; for example, near a bath tub, washbowl, kitchen sink, laun

dry tub, in a wet

basement, or near a swimming pool.

6. Clean only with dry cloth – The appliance should be cleaned only as
recommended by the manufacturer.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions. The appliance should be situated

so that its location
or position does not interfere with its proper ventilation. For example, the
appliance should not be situated on a bed, sofa, rug

, or similar surface that may
block the ventilation openings; or placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow of air through the ventilation
openings.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles,

and the point where they exit from the apparatus.

10. The system has as AC plu

g and will only fit into matching AC outlets. This is a
safety feature to reduce the possibility of electric shock. If the plug will not fit in
your AC outlets, you should have the outlet changed by qualified licensed
electrician. Do not use an adaptor to make the plug fit into your outlet. This
defeats the safety feature and could expose you to electric shock.

11. Only use attachments / accessories specified by the manufacturer.

12. Unplug this appara

tus during lightning storms or when unused for long per

iods of

time.

13. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

14. This appliance shall not be exposed to dripping or splashing water and that no
object filled with liquids such as vases shall be placed on the apparatus.

3

15. Power Sources – The appliance should be connected to a power supply only of
the type described in the operating instructions or as marked on the appliance.
Do not overload wall outlet.

16. Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.

17. Do not attempt to dismantle, open or repair this product yourself. If a fault occurs,
seek advice from your local qualified service technician or contact the distributor
via the telephone number at the back of this instruction manual.

18. Ca

ution marking and nameplate are located on back of product.

IMPORTANT NOTES

Avoid installing the unit in locations described below:

• Places exposed to direct sunlight or close to heat radiating appliances such as

electric heaters.

• Places subject to constant vibration.

• Dusty, humid or moist places.

• Sources of electrical noise such as fluorescent lamps or motors.

NOTE: when the system is switched to standby mode, it is still consuming some power.
To disconnect the system completely, switch the Power On/Off switch on the back of
the unit to OFF position. .