Page 1
600 Series
Owner’s Guide
Page 2
Important Safety Instructions
WARNING: TO REDUCE THE RISK OF INJURY OR DAMAGE, READ THE FOLLOWING SAFETY
PRECAUTIONS WHEN SETTING UP, USING, AND MAINTAINING YOUR ROBOT.
THIS APPLIANCE MAY ONLY BE USED BY CHILDREN AGED 8 YEARS AND ABOVE AND PERSONS
WITH REDUCED PHYSICAL, SENSORY, OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND
KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF
THE APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS INVOLVED. CHILDREN MUST
NOT PLAY WITH THE APPLIANCE. CLEANING AND USER MAINTENANCE MUAT NOT BE CARRIED
OUT BY CHILDREN WITHOUT SUPERVISION.
WARNING: TO AVOID ELECTRIC SHOCK DO NOT EXPOSE THE ELECTRONICS OF YOUR
ROBOT OR THE INTEGRATED DOCK-CHARGER KNOWN AS HOME BASE. THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DO NOT HANDLE YOUR ROBOT AND HOME BASE™ WITH WET HANDS.
EN
Roomba® 600 Series Owner’s Guide i
Page 3
EN
Important Safety Instruction (cont.)
• Heed all warnings on your robot and its parts.
• WARNING: Risk of electric shock, use indoors in dry locations only.
• Your robot is not a toy. Do not sit or stand on this device. Small children and pets should
be supervised when your robot is operating.
• Store and operate your robot in room temperature environments only.
• Do not use this device to pick up sharp objects, glass, or anything that is burning or smoking.
• Do not use this device to pick up spills of water, bleach, paint, other chemicals,
or anything wet.
• Do not spray or pour liquids on your robot.
• Before using this device, pick up objects like clothing, loose papers, pull cords for blinds or
curtains, power cords, and any fragile objects. If the device passes over a power cord and
drags it, there is a chance an object could be pulled o a table or shelf.
• If the room to be cleaned has a balcony, a physical barrier should be used to prevent access
to the balcony and ensure safe operation.
• Do not place anything on top of your robot.
• Be aware that the robot moves on its own. Take care when walking in the area that the robot
is operating in to avoid stepping on it.
• Do not operate the robot in areas with exposed electrical sockets in the floor.
• WARNING Shock Hazard: Your robot comes with a region approved power
supply cord. Do not use any other power supply cord. For replacement cords, please
contact Customer Care to ensure the proper selection of a country-specific power
supply cord.
• This robot is intended for dry floor use only.
• WARNING Shock and Fire Hazard: This product is designed to be plugged
into a standard electrical socket only. The product may not be used with any type of power
converter. Use of power converters will immediately void the warranty.
• Do not use non-rechargeable batteries. Use only the rechargeable battery supplied
with the product. For replacement, purchase an identical identical iRobot battery or contact
iRobot Customer Care for alternative battery options.
• CAUTION: Only charge one of the following iRobot batteries: maximum 14.8V, maximum
3000mAh Ni-MH, or maximum 3300mAh Li-ion battery. Other types of batteries may burst,
causing injury. Always contact Customer Care to ensure the correct replacement of your
battery.
• WARNING Shock Hazard: Do not use a Home Base with a damaged cord or plug.
If the cord or plug is damaged, it must be replaced.
• Always charge and remove the battery from your robot and accessories before
long-term storage or transportation.
• If you live in an area prone to electrical storms, it is recommended that you use
additional surge protection. Your robot’s Home Base must be protected with a surge
protector in the event of severe electrical storms.
• WARNING Shock Hazard: Always disconnect your robot from the Home Base
before cleaning or maintaining it.
• Before every use, check the battery pack for any signs of damage or leakage. Do not
charge damaged or leaking battery packs.
• WARNING Chemical Exposure: If the battery pack is leaking, do not allow the liquid
to come in contact with skin or eyes. If contact has been made, wash the aected area
with copious amounts of water and seek medical advice. Place the battery in a sealed
plastic bag and dispose of safely according to local environmental regulations. You should
return it to your local authorised iRobot Service Centre for disposal.
• The battery pack must be removed from the robot before disposal.
• WARNING Fire or Explosion Hazard: Do not crush or dismantle battery packs.
Do not heat or place the battery pack near any heat source or in direct sunlight. Do not
incinerate or short-circuit the battery pack. Do not subject batteries to mechanical shock.
• Do not immerse the battery pack in any liquid.
• Contact your local waste management authority for more information on battery recycling and
disposal regulations in your area.
This symbol on the product or its packaging indicates:
Do not dispose of electrical appliances or batteries as unsorted municipal waste,
use separate collection facilities. Contact your local authority for information regarding
the collection systems available. If electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the groundwater and get into the food
chain, damaging your health and well-being. Please contact your local or regional
authority for more information on collection, reuse, and recycling programmes.
ii For more information, visit www.global.irobot.com
Page 4
Table of Contents
Important Safety Instructions ................................................................................................i
About Your Roomba® ............................................................................................................ 2
Using Your Roomba® ............................................................................................................. 3
Scheduling ............................................................................................................................. 4
Accessories ............................................................................................................................ 4
Regular Robot Care ............................................................................................................. 5
Troubleshooting .................................................................................................................... 8
iRobot Customer Care ......................................................................................................... 9
EN
Roomba® 600 Series Owner’s Guide 1
Page 5
About your Roomba
EN
Top View
Faceplate
Bin Release
Button
Dust Bin
and Filter
Buttons & Indicators
Troubleshooting
Indicator*
Battery
Indicator*
*Features and/or location may vary by model
DIRT DETECT
RCON Sensor
Handle*
Light Touch Sensor
Scheduling
Interface*
SPOT Button
Dirt Detect Indicator*
CLEAN/Power Button
DOCK Button
Scheduling
Interface*
Home Base
RCON
Sensor
Charging
Contact Points
Bottom View
Cli Sensor
Side Brush
Cli Sensor
Right Wheel
Module
Cleaning
Head Module
Cli Sensor
Charging Contact Points
Removable
Castor Wheel
Cli Sensor
Left Wheel
Module
2 For more information, visit www.global.irobot.com
Page 6
Using your Roomba
Positioning the Home Base
Place the Home Base in an open, uncluttered area, leaving the
following distances around the Home Base:
• At least 1.5 feet (0.5 metres) on each side of the Home Base
• At least 4 feet (1.2 metres) in front of the Home Base and at least
4 feet (1.2 metres) away from stairs
• At least 8 feet (2.4 metres) from Virtual Wall Barriers
Always keep the Home Base plugged in.
®
Use Instructions
• Turn your robot over and remove the battery pull tab.
Then place Roomba on the Home Base to charge the battery.
• To fully charge the battery before the first cleaning cycle, allow
Roomba to charge on the Home Base for 3 hours.
• Manually wake Roomba up by pressing CLEAN once.
To start a cleaning cycle, press CLEAN again.
Note: Remove excess clutter from floors before cleaning
(e.g. clothing, toys, etc.). Use Roomba frequently to
maintain well-conditioned floors.
• To pause Roomba during a cleaning cycle, press CLEAN.
• To resume the cleaning cycle, press CLEAN again.
• To end the cleaning cycle and put Roomba in standby mode,
press and hold CLEAN until Roomba’s indicators turn o.
• To send Roomba back to its Home Base during a cleaning cycle,
press DOCK on Roomba. This will end the cleaning cycle.
• To use SPOT Cleaning, place Roomba on top of the localised
debris and press SPOT on the robot. Roomba will thoroughly
clean the area by spiraling outward about 3 feet (1metre) in
diameter and then spiraling inward to where it started.
Note: After each use, empty the bin and clean the filter.
• Always store Roomba on the Home Base so it’s charged and ready to
clean when you need it. If storing o of the Home Base, remove the
battery first and then store Roomba and the battery in a cool, dry place.
Battery and Charging
Charge Roomba using the Home Base. The indicator lights will turn o
after 60 seconds to conserve energy while Roomba is charging. Check the
status of the battery by pressing the CLEAN button to illuminate the Battery
Indicator or the CLEAN button. Use this chart to determine the status of the
battery while charging.
Indicator Colour Battery Status
Amber Charging
Solid green Fully charged
Setting the Clock (select models)
You must set the clock before scheduling Roomba to clean. To set the time:
Press and hold CLOCK.
1
While holding CLOCK, use the DAY, HOUR, and MINUTE
2
buttons to set the correct time.
Release CLOCK. Roomba will beep to indicate that the
3
time has been set.
Roomba® 600 Series Owner’s Guide 3
EN
Page 7
Scheduling (select models)
Accessories
EN
You can schedule Roomba to clean once per day, up
to seven times per week. You must set the time before
setting a schedule.
To Set or Change the Cleaning Schedule
Press and hold SCHEDULE.
1
While holding SCHEDULE, use the DAY, HOUR, and MINUTE
2
buttons to set the schedule.
Release SCHEDULE. Roomba will beep to indicate that the
3
schedule has been set.
To Delete a Scheduled Cleaning Time
Press and hold SCHEDULE.
1
While holding SCHEDULE, press the DAY button to cycle
2
through scheduled cleaning times.
When Roomba displays the scheduled cleaning time you’d
3
like to delete, press and hold DAY for five seconds.
Release SCHEDULE. Roomba will beep to indicate the
4
cleaning time has been deleted.
The Dual Mode Virtual Wall Barrier
(optional accessory for all models)
The Dual Mode Virtual Wall barrier keeps
Roomba in the places you want to be
cleaned — and out of the ones you don’t.
In between cleaning cycles, you can leave
the device operating in its position on the
floor. You can set your device to one of two
modes to fit your home’s cleaning needs:
Note: Under normal use, batteries will last 8-10 months. If you are not planning on
using your Virtual Wall device for an extended period of time and you would like to
store it, be sure to switch it to the “O ” (middle) position.
Virtual Wall Mode: When the switch is in the “up”
position ( ), the device functions as a Virtual
Wall. This means that you can set it to block
openings of up to 10 feet (3 metres). It creates
an invisible, cone-shaped barrier that only
Roomba can see.
Note: This barrier gets wider as it gets
further from the device (refer to illustration).
10 ft/3 m
Halo Mode: When the switch is in the “down”
position ( ), the device creates a protective
zone that Roomba will not enter. This prevents
Roomba from bumping into items you want to
protect (e.g. a dog bowl or vase) or crossing
into undesired areas (e.g. a corner or under
a desk). The Halo is invisible and reaches
approximately 24 inches (60 centimetres)
from the centre of the device.
4 ft/1.2 m
4 For more information, visit www.global.irobot.com
Page 8
Regular Robot Care
Recommended Robot Care
To keep Roomba running at peak performance, perform the
following care procedures. If you notice Roomba picking up less
debris from your floor, empty the bin, clean the filter, and clean
the brushes.
Robot Part Care Frequency Replacement
Frequency
Bin After each use -
Filter Once per week
Brushes Once per week (twice
Front Castor Wheel Once every two weeks Every 12 months
Side Brushes
Cli Sensors
Charging Contacts
Note: iRobot manufactures various replacement parts and
assemblies. You may purchase replacement parts by visiting
www.irobot.com/Roomba600. If you have questions regarding
replacement parts, please contact iRobot Customer Care for
more information.
(twice per week in
homes with pets)
per week in homes with
pets)
Once per month -
Every 2 months
Every 6-12 months
EN
Roomba® 600 Series Owner’s Guide 5
Page 9
Emptying the Bin
Cleaning the Brushes
EN
Press the button and pull to remove the bin.
Cleaning the Filter
Pull the filter to remove it. Tap the filter against
the side of your household waste bin to clear
the debris. Reinstall the filter.
Replace the filter every two months.
Open the brush guard by lifting
1 3
both tabs.
Tabs
Remove the brushes and remove
2
any hair or debris.
Flexible Brush
Brush
Bearings
Main Brush
Remove and clean the hair and dirt
from the brush bearings.
Replace the brushes every 6-12 months
6 For more information, visit www.global.irobot.com
Page 10
Cleaning the Front Castor Wheel
Cleaning the Cli Sensors and Charging Contacts
Pull firmly on the front wheel to remove it from the front castor
1
assembly.
Remove any debris from inside the wheel cavity.
2
Spin the wheel by hand. If the rotation is restricted, remove the
3
wheel from its housing and push firmly to remove the axle and
clear any debris or hair wrapped around it.
Reinstall all parts when finished. Make sure the wheel clicks back
4
into place.
Wheel
Axle
Housing
Important: A front wheel clogged with hair and debris
could result in floor damage.
Wipe all sensors and charging contacts with a clean, dry cloth.
EN
Cleaning the Side Brush
Use a small screwdriver to remove the screw. Pull the side brush to
remove it from the robot. Remove any hair and/or debris and reinstall
the side brush.
Roomba® 600 Series Owner’s Guide 7
Page 11
Troubleshooting
EN
Problems While Cleaning
If the battery is low, the Battery Indicator or CLEAN button will
illuminate red. Please charge immediately. Place the Roomba on the
Home Base to charge.
If the Roomba encounters an error while cleaning, the Troubleshooting
Indicator or CLEAN button will blink and you will hear an audible
error message. Follow the audible instructions. The message can be
repeated by pressing CLEAN.
If the problem persists, visit global.irobot.com to contact your local
customer support centre.
Problems While Charging
If Roomba encounters an error while charging, the Troubleshooting
Indicator will blink and you will hear an audible error message. Check
charging contacts on the robot and Home Base to ensure that they
are clean and free of debris. If you continue to experience problems
while charging, visit global.irobot.com to contact your local customer
support centre.
If you have questions or comments about this product, please contact
iRobot before contacting a retailer.
Visit the iRobot Owner’s Centre site at global.irobot.com for support
tips, frequently asked questions, and information about accessories
and other iRobot products.
Lithium Ion Battery
(available for select models)
Important: Lithium ion batteries and products that contain lithium ion
batteries are subject to stringent transportation regulations. If you need to
ship this product (with the battery included) for service, travel, or any other
reason, you MUST comply with the following shipping instructions:
» Remove the lithium ion battery from the product
- Turn robot over and remove the side brush screw
and then remove the side brush by pulling gently.
- Unscrew the four screws from the bottom cover and lift
o the bottom cover.
- Remove the battery.
» Place a piece of tape over the battery’s metal charging
contacts
» Reinstall the battery (with the tape on it) in the product and
secure the battery door
» Package the product in its original packaging or in your own
packaging that prevents any movement during transportation
» Ship via ground transportation only (no air shipping)
8 For more information, visit www.global.irobot.com
Page 12
iRobot Customer Care
USA & Canada
If you have questions or comments about
your Roomba, please contact iRobot before
contacting a retailer.
You can start by visiting
www.irobot.com/support for support tips,
frequently asked questions, and information
about accessories. Should you still need
assistance, call our Customer Care team on
(877) 855-8593.
iRobot Customer Care Hours:
• Monday to Friday, 9AM – 9PM Eastern Time
• Saturday and Sunday, 9AM – 6PM Eastern Time
Outside USA & Canada
Visit global.irobot.com to:
• Learn more about iRobot in your country
• Get hints and tips to improve your Roomba’s
performance
• Get answers to questions
• Contact your local support centre
For EU Declaration of Conformity information,
visit www.irobot.com/compliance.
EN
Roomba® 600 Series Owner’s Guide 9
Page 13
© iRobot Corporation, Crosby Drive, Bedford, MA USA. All rights reserved.
iRobot, Roomba, iAdapt, Home Base, and Virtual Wall are registered trademarks of iRobot Corporation. AeroVac and Dirt Detect are trademarks of iRobot Corporation.
WC:
Loading...