-001 First release of the Intel® Mobile Board MGM45WU Product Guide July 2008
-002 Second release of the Intel® Mobile Board MGM45WU Product Guide August 2008
If an FCC declaration of conformity marking is present on the board, the following statement applies:
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
For questions related to the EMC performance of this product, contact:
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124
1-800-628-8686
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the
user’s authority to operate the equipment.
Tested to comply with FCC standards for home or office use.
Canadian Department of Communications Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set
out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numerique német pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe B prescrites dans le Réglement sur le broullage radioélectrique édicté par
le ministére des Communications du Canada.
Disclaimer
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OR
GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR
SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT
OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended
for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and
product descriptions at any time, without notice.
®
Mobile Board MGM45WU may contain design defects or errors known as errata which may cause the
Intel
product to deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing
your product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel
literature, may be obtained from Intel Corporation by going to the World Wide Web site at:
http://www.intel.com/ or by calling 1-800-548-4725.
This Product Guide gives information about board layout, component installation, BIOS
update, and regulatory requirements for Intel
®
Mobile Board MGM45WU.
Intended Audience
The Product Guide is intended for technically qualified personnel. It is not intended for
general audiences.
Use Only for Intended Applications
All Intel Mobile Boards are evaluated as Information Technology Equipment (I.T.E.) for
use in personal computers (PC) for installation in homes, offices, schools, computer
rooms, and similar locations. The suitability of this product for other PC or embedded
non-PC applications or other environments, such as medical, industrial, alarm systems,
test equipment, etc. may not be supported without further evaluation by Intel.
Document Organization
The chapters in this Product Guide are arranged as follows:
1 Mobile Board Features: a summary of product features
2 Installing and Replacing Mobile Board Components: instructions on how to install
the Mobile Board and other hardware components
3 Updating the BIOS: instructions on how to update the BIOS
A Intel
B Regulatory Compliance: safety standards, regulations, and product certifications
®
Mobile Utility: information how to use this software to manage your
computer
Conventions
The following conventions are used in this manual:
CAUTION
Cautions warn the user about how to prevent damage to hardware or loss of data.
NOTE
Notes call attention to important information.
iii
Intel Mobile Board MGM45WU Product Guide
Terminology
The table below gives descriptions of some common terms used in the product guide.
• Two 300 Mb/s SATA interfaces: one supporting a hard disk drive
and one supporting an optical disk drive
• Winbond* WPC8763L Mobile Embedded Controller which provides
the following:
― Keyboard control
― Touch pad
― Thermal module fan control
― SPI Flash interface
• Intel
®
Extensible Firmware Interface (EFI) BIOS
• Support for SMBIOS
• Intel
• Intel
®
Rapid BIOS Boot
®
Express BIOS Update
Support for Intel
platform security.
• Microsoft Windows Vista*, SP1
― All 32-bit versions
― All 64-bit versions
• Microsoft Windows* XP, SP2 and SP3
― Professional
― Home
• Microsoft Windows* XP 64-bit
64-bit driver support for all subsystems
• Support for a Fingerprint Reader via USB
• Support for a Web Camera via USB
• Support for a Smart Card Reader via Expansion Board B
• Support for Digital Array Microphones
• Support for Intel
• Support for Wave Systems Corporation EMBASSY* Trust Suite
(ETS) OEM version
®
Active Management Technology (Intel® AMT)
®
Power Manager
10
Mobile Board Features
Mobile Board Components
Figure 1 shows the location of the major components on the top side of Intel Mobile
Board MGM45WU; Table 2 identifies the
components.
Figure 1. Intel Mobile Board MGM45WU Components (top)
11
Intel Mobile Board MGM45WU Product Guide
Table 2. Intel Mobile Board MGM45WU Components (top)
Label Description
A ExpressCard/34 slot
B Power button
C LVDS/Lid connector
D Analog microphone
E ID expansion connector A
F Keyboard connector
G ID expansion connector B (fingerprint reader)
H Touch pad connector
I Touch pad buttons
J Battery LED
K Machine status LED
L Hard disk drive LED
M Caps lock LED
N Num lock LED
O Wireless LED
P Bluetooth LED
12
Mobile Board Features
Figure 2 shows the location of the major components on the bottom side of Intel
Mobile Board MGM45WU; Table 3 identifies the components.
Figure 2. Intel Mobile Board MGM45WU Components (bottom)
13
Intel Mobile Board MGM45WU Product Guide
Table 3. Intel Mobile Board MGM45WU Components (bottom)
Label Description
A DVI-I connector
B USB 2.0 connector
C RJ-11 (telephone) connector
D Modem (MDC) connector
E CMOS battery
F BIOS configuration jumper
G Processor socket
H Modem connector
I Thermal module fan connector
J PCI Express full-mini card connector
K Speakers connector
L Expansion Board B connector
M Bluetooth connector
N Hard disk drive (SATA) connector
O PCI Express half-mini card connector
P Optical disk drive (SATA) connector
Q Expansion Board A board-to-board connector
R Expansion Board A connector
S Battery pack connector
T Docking connector
U DIMM 2 socket
V DIMM 1 socket
14
Mobile Board Features
Figure 3 is a side view of the Mobile Board showing its I/O ports; Table 4 identifies the
ports.
Figure 3. Intel Mobile Board MGM45WU I/O Ports
Table 4. Intel Mobile Board MGM45WU I/O Ports
Label Description
A ExpressCard/34 slot
B RJ-11 connector
C USB 2.0 connector
D DVI-I connector
Figure 4 shows the location of the major components on the top and bottom of
Expansion Board A; Table 5 identifies the components.
Figure 4. Expansion Board A Components
15
Intel Mobile Board MGM45WU Product Guide
Table 5. Expansion Board A Components
Label Description
A Expansion Board A connector
B Expansion Board A board-to-board connector
C DC power jack
D RJ-45 (LAN) connector
E USB 2.0 connector
F USB 2.0 connector
G Audio mute button
H + Volume button
I – Volume button
J Wireless radio on/off button
K Launch Internet browser button
Figure 5 is a side view of Expansion
Board A showing its I/O ports; Table 6 identifies
the ports.
Figure 5. Expansion Board A I/O Ports
Table 6. Expansion Board A I/O Ports
Label Description
A USB 2.0 connector
B USB 2.0 connector
C RJ-45 (LAN) connector
D DC power jack
16
Mobile Board Features
Processor
Intel Mobile Board MGM45WU supports the following Intel® processors in the mPGA479
package:
• Intel Core 2 Duo mobile processors with a 1066/800 FSB
• Intel Celeron mobile processors with a 667 FSB
Processors are not included with the Mobile Board and must be purchased separately.
For instructions on installing a processor, go to page 37 in Chapter 2.
System Memory
NOTE
To be fully compliant with all applicable Intel® SDRAM memory specifications, the
board should be populated with DIMMs that support the Serial Presence Detect (SPD)
data structure. If your memory modules do not support SPD, you will see a
notification to this effect on the screen at power up. The BIOS will attempt to
configure the memory controller for normal operation.
The Mobile Board supports the dual or single channel memory configurations defined
below.
•Two 200-pin Double Data Rate 2 (DDR2) Small Outline Dual Inline Memory Module
(SO-DIMM) sockets with gold-plated contacts
• Support for:
⎯ Non-ECC DDR2 800/667 memory
⎯ Serial Presence Detect (SPD) memory only
⎯ Unbuffered, non-registered single- or double-sided DIMMs
⎯ Memory configurations listed below:
• Up to 2.0 GB utilizing 256 Mb technology
• Up to 4.0 GB utilizing 512 Mb or 1 Gb technology
For instructions on installing memory, refer to “Installing System Memory” on page 56
in
Chapter 2.
17
Intel Mobile Board MGM45WU Product Guide
Intel® GM45 Express Chipset
The Intel GM45 Express Chipset consists of the following devices:
•Intel GM45 Express Chipset Graphics and Memory Controller Hub (GMCH) with
Direct Media Interface (DMI)
•Intel 82801IEM ICH9 Mobile Enhanced (Intel ICH9M-E) I/O Controller Hub
The GMCH provides interfaces to the processor, memory, and the DMI interconnect.
The component also provides integrated graphics capabilities supporting 3D, 2D, and
display capabilities.
The Intel ICH9M-E is the centralized controller for the board’s I/O paths.
For more information on the Intel GM45 Express Chipset, go to
http://developer.intel.com/products/chipsets/
Intel GM45 Graphics Subsystem
The Intel GM45 Express Chipset contains the Intel Graphics Media Accelerator
4500MHD (GMA 4500MHD) graphics controller.
The graphics controller supports external displays via the DVI-I connector on the side
of the Mobile Board.
The Intel GMA 4500MHD graphics controller has the following features:
• Advanced graphics performance, including:
⎯ DirectX10.0* and OpenGL* 2.0 compliance
⎯ Shader Model 4.0 support
• Enhanced video playback support, including:
⎯ Playback of HD-DVD and Blu-ray Disc* technology DVDs
⎯ Software DVD at 30 fps full screen
• Advanced Display support, including:
⎯ DVI specification 1.0 compliance
⎯ High Definition Content Protection (HDCP) version 1.1 compliance
⎯ External digital and analog DVI display support. Analog signals are available
with a DVI-to-VGA adapter.
⎯ HD display support including 720p, 1080i, and 1080p
⎯ External digital and analog display support up to 2048 x 1536 at a 75-Hz
refresh rate (QXGA). Also supports 1920 x 1080 resolution for full High
Definition video playback quality.
18
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.