Integrated 5.1-Channel DVD Receiver
FEATURES
AMPLIFICATION:
•
5 x 25 Watts/Channel at 6Ω
•
High-current low impendence drive
PROCESSING:
•
Dolby Digital, DTS, and Pro-Logic II decoding
•
Linear PCM 96 kHz/24-bit DACs for all channels
•
VLSC — Vector Linear Shaping Circuit
•
12 DSP Modes
VIDEO:
•
Progessive scan component video output
•
S-Video output
•
Composite video output
CONNECTIONS:
•
2 Analog audio inputs, 1 output
•
1 Optical input, 1 output
•
Rear IR input
•
Color-coded speaker terminals
CUSTOM INTEGRATION FEATURES:
•
Solid brushed aluminum front panel
•
IPM — Intelligent Power Management
•
Sleep Timer (via remote)
•
Preprogrammed remote control
•
Optional rack mount kit available-IRK-070-3
Designed to Integrate. Built to Stimulate.
SPECIFICATIONS
AMPLIFIER
Continuous average power output (FTC)
All channels: 25 W per channel min. RMS into
6Ω, two channels driven,
1,000 Hz with no more than
10% total harmonic distortion.
Frequency response: 20 Hz to 30 kHz: +/- 0.8 dB
Signal-to-noise ratio: 100 dB (IHF A, 0.5 V input)
Total harmonic distortion: 10% at rated power
IM distortion: 10% at rated power
Damping factor: 40 at 8Ω
Acoustic control: 1: +9 dB at 82 Hz
2: +9 dB at 82 Hz
+6 dB at 10,000 Hz
Muting: -50 dB
INPUT SENSITIVITY AND IMPEDANCE
Line
(TV/Line, MD/CDR/Tape): 200 mV/50 kΩ
OUTPUT LEVEL AND IMPEDANCE
Rec out (MD/CDR/Tape): 200 mV, 2.2 kΩ
Pre out: 1 V 470Ω
VIDEO OUTPUTS
Component video: Y: 1.0 V (p-p), 75Ω, negative sync,
RCA x 1
PB /PR: 0.7 V (p-p), 75Ω
S-Video: Y: 1.0 V (p-p), 75Ω, negative sync,
4-pin mini DIN x 1
C: 0.286 V (p-p), 75Ω
Composite video: 1.0 V (p-p), 75Ω, negative sync,
RCA x 1
Integrated 5.1-Channel DVD Receiver
DVD PERFORMANCE
Frequency response: 10 Hz to 44 kHz (96 kHz)
Signal-to-noise ratio (digital audio): >100 dB
Audio dynamic range (digital audio): >93 dB
Harmonic distortion (digital audio): Less than 0.025%
Wow and flutter: Below threshold
of measurability
FM
Tuning range: 87.50-108.00 MHz
(50-kHz steps)
Usable sensitivity, stereo: 17.2 dBf, 2.0 µV
(75 ohms IHF)
AM
Tuning range: 530–1710 kHz
(10-kHz steps)
Usable sensitivity: 30 µV)
GENERAL
Power supply: AC 120 V, 60 Hz
Power consumption: 130 W
Dimensions (W x H x D): 17-1/8” x 3-3/16” x 14-7/16”
435 x 81 x 366 mm
Weight: 15.4 lbs. (7.0 kg)
Optional mounting kit: IRK-070-3
U dimension: 2U
* Some formats not supported.
Product features and specifications subject to change without notice.
Designed to Integrate. Built to Stimulate.