In-Situ Sensor Summary Sheet User Manual

Innovations in

Water Monitoring

TROLL® 9500 Sensor Summary

TROLL 9500 General

Operating temp.

Storage temp. -40 to 65° C (-40 to 140° F)

Dimensions & weight

Wetted materials PVC, 316L stainless steel, titanium, Acetal, Viton®, nylon. Cable: Tefzel® or polyurethane

Water tightness rating

Output options RS485/RS232; SDI-12 (optional with SDI-12 adapter); ASCII streaming mode or binary command

Power

TROLL 9500 Logging

Data logging Professional and LTS models only: 16 programmable tests (dened, scheduled to run, or stored). Logging modes: Linear, Linear Average, Event

Memory 4 MB (222,000 data records1)

Standard Sensors Accuracy Range Depth Rating Response Time (T90)

Barometric pressure ±0.3% FS 16.5 psia

Level, Depth, Pressure

TROLL® 9500 Multiparameter Instrument

-5 to 50° C (23 to 122° F)

4.7 cm (1.85 in) OD x 55.25 cm (21.75 in). With twist-lock hanger: 56.52 cm (22.25 in). Restrictor: 8.9 cm (3.5 in) OD x 21 cm (8.25 in) long;

1.9 kg (4.2 lbs)

IP68 with all sensors and cable attached. Battery compartment: IP67 without the battery cover or cable attached

External: 9-16 VDC (optional). Internal: 2 user-replaceable D batteries (use either alkaline or matched pair of Saft lithium batteries)

5

Methodology

±0.1% FS or better
Sensor accuracy: -5 to 50° C

Meets highest rating

15, 30, 100, or 300 psi Non-vented

30 psia: 10.90 m (35.76 ft)
100 psia: 60.11 m (197.2 ft)
300 psia: 200.7 m (658.6 ft)
Vented
15 psig: 10.55 m (34.61 ft)
30 psig: 21.10 m (69.21 ft)
100 psig: 70.32 m (230.7 ft)
300 psig: 211.0 m (692.1 ft)

<30 sec per 30 m (100 ft)
of cable

Instantaneous in thermal
equilibrium

Silicon strain gauge

Silicon strain gauge
(non-vented or
vented)

Conductivity Low: ±0.5% or 2 µS/cm

Dissolved oxygen
RDO® sensor

Clark cell electrode

pH (single) or
pH/ORP (combo)

Temperature ±0.1° C -5 to 50° C (

Extended Parameter (XP) Sensors

Ammonium (NH

Chloride (Cl-) ±15% 0.35 to 35,500 ppm Cl 70 m (231 ft)

Nitrate (NO

Turbidity

Warranty TROLL 9500 and all sensors (excluding RDO & ISE sensors) come with a 1-year warranty. RDO Sensor: 3-year warranty. ISE sensors: 90-day

Notes

3

-

)

3

High: ±0.5% + 2 µS/cm

±0.1 mg/L
±0.2 mg/L
±10% of reading

±0.2 mg/L

pH: ±0.1 pH unit

6

ORP: ±5.0 mV

+

) ±10% 0.14 to 14,000 ppm N 14 m (46 ft) T98: <60 sec, 1.4 to 14

4

±10% 0.14 to 14,000 ppm N 14 m (46 ft) T98: <60 sec, 1.4 to 14

±5% or 2 NTU/FNU 0 to 2,000 NTU/FNU 105 m (346 ft)

warranty. RuggedCable® System: 2-year warranty.

1

A single data record includes time stamp, temperature, RDO, pH, and conductivity logged in Linear or Linear Average mode. 2Full operating
range: 70 to 200,000 µS/cm. 3Full operating range: 0 to 50 mg/L. 4EPA-approved under the Alternate Test Procedure process. 5Time required for a
sensor to reach 90% stable. 6pH sensor and pH/ORP sensor temperature range 0 to 50° C.

Low: 5 to 20,000 µS/cm
High2: 150 to 112,000 µS/cm

0 to 8 mg/L
8 to 20 mg/L
20 to 50 mg/L

0 to 20 mg/L;
saturation

pH: 0 to 12 pH units
ORP: ±1400 mV

0 to 200%

23 to 122° F

) Meets highest rating < 30 sec EPA 170.1

Low: Meets highest rating
High: Meets highest rating

Meets highest rating

246 m (807 ft)

pH: 211 m (692 ft)
pH/ORP: 211 m (692 ft)

Low:

Instantaneous

High:

Instantaneous

T90: <45 sec. T95: <60 sec.
T90: <45 sec. T95: <60 sec.
T90: <45 sec. T95: <60 sec.

1-mil membrane: 1-2 min
@ 25° C
2-mil membrane: 90 sec
to 3 min

pH: <15 sec, pH 7 to pH 4
ORP: <15 sec

ppm N

T98: <60 sec, 3.54 to 35.45
ppm Cl

ppm N

Instantaneous (5 sec for rst
reading)

Std. Methods 2510,
EPA 120.1
Std. Methods 2510,
EPA 120.1

EPA-approved In-Situ
Methods4 1002-8­2009, 1003-8-2009,
1004-8-2009

Std. Methods 4500-O G,
EPA 360.1

pH: Std. Methods 4500­H+, EPA 150.2
ORP: Std. Methods
2580

Std. Methods 4500-NH3
D, EPA 350.3

Std. Methods 4500­Cl- D

Std. Methods 4500­NO3 D

ISO 7027

TROLL® 9500 Sensor Summary

Potential Interferences

pH

Sodium salts

DO (Clark Cell)

CO2, HS-, O

3

DO (Optical)

NaCIO (bleach) >3%
Alcohols >5%
H2O2 (peroxide) >3%
Gaseous SO
Gaseous Cl

2

2

Do not use in organic solvents, e.g.,
acetone, chloroform, or methylene chloride.

ORP

Ions that are stronger reducing agents
than hydrogen or platinum, e.g.,
chromium, vanadium, titanium

Nitrate NO

HCO

3

2-

CO

3

-

CIO

4

I- iodide

-

CIO

3

CN- cyanide
Br - bromide

-

NO

nitrite

2

HS- hydrogen sulde
CI- chloride
H2PO
AcO- acetate
F- uoride

2-

SO

sulfate

4

*Signicant interference above pH3

-

3

-

hydrogen carbonate*
carbonate
perchlorate

chlorate

-

hypophosphate

4

Ammonium NH

4

Cs+ cesium
K+ potassium
TI+ thallium
Na+ sodium
Li+ lithium
H+ pH
Ag+ silver

+

Chloride Cl

Complexes with:
Bi3+ bismuth
Cd2+ cadmium
Mn2+ manganese
Pb2+ lead
Sn2+ tin
Tl3+ thallium

Reducing agents:
OH- hydroxide
NH3 ammonia

2-

S2O

thiosulfate

3

Br - bromide
S2- sulde
I- iodide
CN- cyanide

-

Calibration Solutions

Solution

Quick Cal (pH, ORP, conductivity)

ZoBell’s (ORP)

Low Conductivity (143 µS)

Other Conductivity

pH Buers

Sodium Sulte

Turbidity

Low Chloride

Low Nitrate

Low Ammonium

Other ISE Solutions

pH Fill Solution

Shelf Life After Opening

7-21 days (±10 mV, ±0.05 pH, ±50 µS)—store cool and dark, shake before use

7-21 days (±10 mV)—store cool and dark

hours (±1 µS check before use)

3-6 months

3-6 months

3-6 months

12 months

1 month

1 month

1 month

2 months

6-12 months

For more information contact In-Situ Inc.

221 East Lincoln Avenue, Fort Collins, CO 80524
1-800-446-7488 (toll-free in U.S. & Canada)
1-970-498-1500 (international & domestic)

www.in-situ.com

Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, Pocket-Situ, RDO, RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ
Inc. © 2011. All rights reserved.

Tefzel is a registered trademark of E.I. du Pont de Nemours & Co. Viton is a registered trademark of DuPont Performance Elastomers L.L.C.

0032005 rev. 019 09/11