Ingersoll-Rand 3101G, 3107G User Manual
Air Die Grinder
3101G and 3107G
Product Information
EN
Product Information
ES
Especicaciones del producto
FR
Spécications du produit
80168610
Edition 2
December 2009
Save These Instructions
4
7
5
3
2
1
9
48h
6
24h
10
8h
PMAX
8
6
PMAX
1
3
2
5
6
7
9
10
(Dwg. 16573164)
IR # - NPT inch (mm) NPT IR # IR # IR # cm
C38121-600-VS 3/8 (10) 1/4 MSCF32 10 67 2
2 80168610_ed2
3
EN
Product Safety Information
Intended Use:
These die grinders are designed for grinding, porting, polishing, de-burring, and breaking
sharp edges.
For additional information refer to Air Die Grinder Product Safety Information Manual
Form 04580288.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specications
Model Exhaust Collet Size
3101G Rear 1/4” 20000 0.33 0.25 1.3 0.58 6.8 171.0
3107G Rear 1/4” 27000 0.33 0.25 1.0 0.45 6.6 168.0
Average Air
Consumption
Model
cfm l/min cfm l/min † Pressure (Lp) ‡ Power (Lw) m/s
3101G 3 85 18 500 93.1 104.1 1.8
3107G 3 85 18 500 92.4 103.4 2.6
† KpA = 3dB measurement uncertanity
‡ KwA = 3dB measurement uncertanity
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-o, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16573164 and table on page 2. Maintenance frequency is shown in
circular arrow and dened as h=hours, d=days, and m=months of actual use. Items identied as:
1. Air lter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-o valve 9. Oil
5. Hose diameter 10. Grease - through tting
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.
80168610_ed2 EN-1
Free Speed Rated Power Tool Weight Overall Length
rpm hp kW lbs Kg in mm
Air Consumption
@ Load
Sound Level dB (A)
(ISO15744)
Vibration Level
(ISO8662)
2
Loading...