IKEA NUTID OV 9 Instruction Manual

NUTID GB

OV9

ENGLISH 4

ENGLISH

Table of contents

Safety information	4
Product description	6
Control panel	8
Daily use	8
Cooking tables	14
Cleaning and maintenance	16
What to do if ...	19
Technical data	21

Safety Information

Your safety and that of others are very important

This manual and the appliance itself provide important safety warnings, to be read and observed at all times.

This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others.

All safety warnings are preceded by the danger symbol and the following terms:

DANGER! Indicates a hazardous situation which, if not avoided, will cause serious injury.

WARNING! Indicates a hazardous situation which, if not avoided, could cause serious injury.

All safety warnings give specific details of the potential risk present and indicate how to reduce risk of injury, damage and electric shock resulting from improper use of the appliance. Carefully observe the following instructions:

-- The appliance must be disconnected from the power supply before carrying out any installation work.

-- Electrical installation and maintenance must be carried out by a qualified technician, in compliance with the manufacturer’s instructions and local safety regulations. Do not repair or replace any part of the appliance unless specifically stated in the user manual.

-- Regulations require that the appliance is earthed.

4

Installation	22
Electrical connection	24
Environmental concerns	24
Electrical connection for
Great Britain and Ireland only	25
IKEA GUARANTE	26

-- The power cable must be long enough for connecting the appliance, once fitted in its housing, to the power supply socket.

-- For installation to comply with current safety regulations, an all-pole disconnect switch with minimum contact gap of 3 mm must be utilized.

-- Do not use multiple plug adapters or extension leads.

-- Do not pull the power supply cable in order to unplug the appliance.

-- The electrical components must not be accessible to the user after installation.

-- Do not touch the appliance with any wet part of the body and do not operate it when barefoot.

-- This appliance is designed solely for use as a domestic appliance for cooking food. No other type of use is permitted (e.g.: heating rooms). The

Manufacturer declines all responsibility for inappropriate use or incorrect setting of the controls.

-- The appliance is not intended for use by persons (including children) with any physical, sensory or mental impairment, or without experience and knowledge of the appliance, unless supervised or previously instructed in its use by those responsible for their safety.

ENGLISH

5

-- The accessible parts of the appliance may become very hot during use. Young children should be kept away from the appliance and supervised to ensure that they do not play with it.

-- During and after use, do not touch the heating elements or interior surfaces of the appliance - risk of burns. Do not

allow the appliance to come into contact with cloths or other flammable materials until all the components have cooled sufficiently.

-- At the end of cooking, exercise caution when opening the appliance door, letting the hot air or steam exit gradually before accessing the oven. When the appliance door is shut, hot air is vented from the aperture above the control panel. Do not obstruct the vent apertures.

-- Use oven gloves to remove pans and accessories, taking care not to touch the heating elements.

-- Do not place flammable materials in or near the appliance: a fire may break out if the appliance is inadvertently switched on.

-- Do not heat or cook sealed jars or containers in the appliance. The pressure that builds up inside might cause the jar to explode, damaging the appliance.

-- Do not use containers made of synthetic materials.

-- Overheated oils and fats catch fire easily. Always remain vigilant when cooking foods rich in fat and oil.

-- Never leave the appliance unattended during food drying.

-- If alcoholic beverages are used when cooking foods (e.g. rum, cognac, wine), remember that alcohol evaporates at high temperatures. As a result, there is a risk that vapours released by the alcohol may catch fire upon coming into contact with the electrical heating element.

Scrapping of household appliances

-- This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste disposal regulations. Before scrapping, cut off the power supply cable.

-- For further information on the treatment, recovery and recycling of household electrical appliances, contact your competent local authority, the collection service for household waste or the store where you purchased the appliance.

ENGLISH

6

Product description

		1
		2
		3
	4	5
	6	Top shelf
		Bottom shelf
	7
	8

1 Control panel

2 Cooling fan1) (hidden)

3 Grill safety guard2)

4Upper heating element/Grill

1)The cooling fan may continue running even after the oven is switched off. During the pyro-clean cycle the fan runs faster than during normal cooking functions.

5 Rear oven lamp

6 Oven fan

7 Bottom heating element (not visible)

8Oven cool door

2)Prevents food from coming into direct contact with the grill. Nevertheless, you are advised not to touch the safety guard whilst the oven is on.

Accessories
Baking tray	Thermometer

	1x	1x
Wire Shelf		Grill Pan Set /
		Drip tray

1x

1x

ENGLISH

7

Inserting wire shelves and other accessories in the oven

The wire shelf and other accessories are provided with a locking mechanism to prevent their unintentional removal.

1.Insert the wire shelf horizontally, with the raised part “A” upwards (Fig. 1).

A

Fig. 1

2.Angle the wire shelf when it reaches the locking position “B” (Fig. 2).

B

Fig. 2

3.Return the wire shelf to the horizontal position and push it in fully to “C” (Fig. 3).

C

Fig. 3

4.To remove the wire shelf proceed in reverse order.

The other accessories, like the drip tray and baking tray, are inserted in exactly the same way. The protrusion on the flat surface enables the accessories to lock in place.

ENGLISH

8

Control panel

A B C

A Function selector knob

B Programming button: (“set”)

C Confirmation button (“ok”)

D Buttons for changing time (“-” “+”)

E Thermostat knob

DE

Retractable knobs

-- To use this type of knob, press it in the middle.

-- The knob comes out.

-- Turn it to the required position. Once cooking is over, turn the knob to 0

and press it again to restore it to its original position.

Daily use

Oven activation

When the oven is connected to the power supply for the first time, or after a power failure, the display indicates “ 12:00

Clock selection and modification:

1.Press the “set” button. The time flashes on the display.

2.Press the “-” or “+” button to set the hour.

3.Press the “set” button and “-” or “+” to set the minutes.

4.Press the “ok” button to confirm.

To modify the time:

Keep the “ok” button pressed for 3 seconds, until the time flashes on the display. Repeat the steps described above.

Cooking function selection

1.Turn the knob A to the required function.

2.Turn the knob E to select the temperature, or the power level in the Grill and Turbogrill functions. To confirm the temperature or predefined power

level, go to point 3.

For the “Defrost” function, go straight to point 3.

”.3. Press the “ok” button to confirm; the oven switches on. The indicator near

lights up.

4. The indicator goes off when the oven temperature reaches the selected temperature.

To modify the temperature:

1.Turn the knob E and select the required temperature again.

NB:

To cancel any selection made, turn the knob A to “ 0”. Otherwise, press the “set” button to switch the oven off, maintaining

the previously selected functions.

Cooking duration selection

Select the cooking duration (available with all the functions except the special functions) to switch the oven on for a specific

period of time. At the end of this time the

ENGLISH

9

	oven will switch off automatically. The			the end of cooking time minus the cooking
	maximum programmable cooking duration			duration: the indicators on the display
	is 6 hours.			q above the symbols		light up in
	1.	Set the function and the temperature		succession.
		(see the section: “Cooking function		Special Functions
		selection”) up to point 2 without
				Turn the knob A to the function				: q will
		confirming with the “ok” button.
				light up near the symbol .
	2.	Press the “set” button (the indicator q on
		the display lights up next to the cooking		Pizza
				Function at a constant temperature of 250°C
		duration symbol ) and, within 8 min.,
				suitable for baking pizzas.
		select the required cooking duration with
		the “-” or “+” buttons.		1.	Turn the knob E until the message “P1”
					appears on the display, followed after 2
	3.	Press the “ok” button to confirm the
					seconds by the predefined temperature
		selection; the oven switches on and the
					of 250°C.
		display will show the remaining cooking
				2.	Press the “ok” button to confirm.
		duration.
				3.	The indicator at	on the control panel
	4.	To modify the previously set
					goes off when the temperature of 250°C
		temperature, turn the knob E.
					is reached, a factory-set time of 12
		To return to the remaining cooking
					minutes flashes on the display and a
		duration, wait 5 seconds.
					buzzer sounds.
		appears on the display:
				4.	Place food in the oven.
	At the end of the previously set time,
				5.	The preset time can be modified with the
	appears on the display and a buzzer
					“+” “-” buttons.
	sounds.
				6.	Press the “ok” button to confirm.
	The oven will switch off automatically.
				7.	At the end of the set time, the oven
	The cooking duration can be modified with
					automatically switches off,
	the “-” or “+” buttons. Return to point 3 of
					appears on the display and a buzzer
	the section “Cooking duration selection”.
					sounds.
	1.	Turn the knob A to “0”.
				Food warmer
	The time of day reappears on the display.
				This keeps the oven at a constant
	End of cooking time selection
				temperature of 60°C.
	Use this function to preset the end of cooking			1.	Turn the knob E until the message “P2”
	time. The maximum programmable time is				appears on the display, followed after 2
	23 hours and 59 minutes.				seconds by the predefined temperature
	1.	Proceed as described in points 1 and			of 60°C.
		2 of the section “Cooking duration		2.	Press the “ok” button to confirm.
		selection”.		3.	The indicator at	on the control panel
	2.	Press the “set” button to set the end of			goes off when the temperature of 60°C is
		cooking time: the indicator	q lights upreached, a factory-set time of 10 minutes
		next to the symbol .			flashes on the display and a buzzer
	3.	Set the end of cooking time with the “-”			sounds.
		or “+” buttons.		4.	Place food in the oven.
	4.	Press the “ok” button to confirm the end		5.	The preset time can be modified with the
		of cooking time.			“+” or “-” buttons.
	The oven will switch on automatically at			6.	Press the “ok” button to confirm.

ENGLISH

10

7.	At the end of the set time, the oven				“-” or “+” buttons to set the required
	automatically switches off,				time.
	appears on the display and a buzzer			3.	Press the “ok” button to confirm the
	sounds.				selection. At the end of the set time: A
“Pyrolysis” function					buzzer sounds and	flashes on the
					display.
1.	Turn the knob A to the Pyrolysis
					Press the “ok” button: the buzzer stops.
	automatic cleaning function and for
					The time of day reappears on the
	2 seconds the display will show			CLn
					display.
	(cleaning); the selector will automatically			Child Safety (Lock)
	set a minimum duration of		1:30 .
2.	To modify the automatic cleaning cycle			1.	After turning the knob A to “0”, press
	duration, use the “+” “-” buttons. The				the “-” and “+” buttons together for 3
	maximum programme duration is 3				seconds.
	hours.			Note:
To set the end of the pyrolysis cycle,				Activation of the LOCK function is indicated
proceed as follows:				by an acoustic signal, whereas the symbol
1.	Press the “set” button to set the end of				appears on the display.
	pyrolysis duration. The indicator			qOncextset, the display will continue to
	to the symbol	lights up.		indicate the time.
2.	Set the end of the pyrolysis cycle with the			2.	The oven functions cannot be used after
	“+” “-” buttons.				Safety Lock activation.
3.	Press the “ok” button to confirm the			3.	To deactivate the lock, repeat the
	end of pyrolysis duration. The oven will				sequence described in point 1.
	switch on automatically at the end of the
	pyrolysis cycle minus the cycle duration
	(previously set). The indicators		q above
	the symbols	light up in succession.

4.To increase the pyrolysis duration, press the “set” button and set the new cycle duration with the “+” button.

5.Confirm with the “ok” button. At the end of the set time, a buzzer sounds and the display will show .

6.Press “ok” to stop the buzzer.

7.Turn the knob A to “0”: the time will reappear on the display.

Timer

The timer can only be used when the oven is not in use and allows a maximum time of 6 hours to be set.

To set the timer:

1.Leave knob A turned to “0”. The display shows the time of the day.

2.Press the “set” button. the indicator q lights up next to the symbol . Use the