Hyundai PT42AH000 Users Manual

FCC ID : PJIPT42AH000

ATTACHMENT E-1.

- USER’S MANUAL -

REPORT NO. : HCT-F03-1103 HYUNDAI C–TECH

Hyundai
Plasma Display

PT42AH000

User’s Guide

P/N 632 0236 102 Rev.02

www.hyundaiQ.com

U.S.A.

EN55020:1994+A11:1996+A13:1999+A14:1999+A12:1999

DECLARATION OF CONFORMITY

GENERAL INFORMATION

U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY

INTERFERENCE STATEMENT INFORMATION TO THE USER

GENERAL INFORMATION

NOTE : This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet of a circuit different from that to which the

receiver is connected.

WE ImageQuest CO., LTD.

Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA

declare under our sole responsibility that the product:

Kind of equipment : PDP TV

Ty pe-Designation : PT42AH000

to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)

Safety : IEC60065:1998 / EN60065:1998
EMC : EN 55022 : 1998+A1:2000, EN 55024 : 1998+A1:2001

EN 61000-3-2 : 2000 / EN 61000-3-3 : 1995+A1:2001

EN 55013:1990+A12:1994+A13:1996+A14:1999

following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.

Accredited testlaboratory:

TÜV Rheinland

Am Grauen Stein

51105 Köln

• Consult the dealer or an experienced radio/TV technician for assistance.

Changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.

KOREA /

Place and date of issue) (Name and signature of

November 26, 2003 HONG KI, KIM

authorized person)

HYUNDAI PLASMA DISPLAY

GENERAL INFORMATION

General Information

Safety Precaution ............................................................. 5

Contents of the Package ................................................... 7

Separately Sold Products ................................................ 7

Parts Names and Functions ............................................ 9

Remote Control ............................................................... 11

HYUNDAI Plasma Display PT421/421H

Safety Precaution

The contents of this section are provided for the safety of users and their property.
Please read the contents before using.

GENERAL INFORMATION

Safety instructions are divided into “warning” and “alert”. Their meanings are as follows.

This pictorial sign is used when a caution is needed on a potentially dangerous items and operations.

Warning : When there is a possibility of serious injury or death upon violation of the displayed instruction.
Alert : When there is a possibility of slight injury or product damage upon violation of the displayed instruction.

Firmly plus the power cord so
that it does not pull out.

- Unstable connection may cause fire.

Warning

Do not use damaged power
cord or plug, or loose outlet.

- They may cause electric shock or fire.

Never touch power plug with
wet hand.

- They may cause electrocution.

Do not use or store flammable
spray or inflammables in a
place near a PDP.

- They may cause explosion or fire.

Never separate, fix, or modify
at user’s discretion.

- When there is a need for fixing, call a
service center. Fire or electric shock
may be caused.

Do not install a PDP in a
bookshelf, closet, or a place
where air is not well circulated.

- Fire may be caused due to the rise of
internal temperature.

Do not put a metallic object like
chopstick, wire, or puncher or
inflammables like paper or a
match in a vent, headphone
jack, or AV jacks of PDP.

- Electric shock or fire may be caused.

Bend an antenna line downward
on a point where the line pass
through from outdoor to indoor
so that rainwater may not
penetrate indoor.

- If raindrop gets into a PDP, fire or electric
shock may be caused.

When a PDP produces
abnormal noise, burning smell,
or smoke, unplug the PDP
immediately and call a service
center.

- Electric shock or fire may be caused.

GENERAL INFORMATION

Do not put water bowl, vase,
candle, bug repellant smoke,
cigarette, small metal palette,
or heavy thing on a PDP.

- It may cause electric shock or fire and
also heavy things may cause injury
when it falls.

Do not install in a place where
there are oil, smoke, or
humidity, or where water is
sprinkled or in a car.

- They may cause electric shock or fire.

Do not install on an unstable
place or small support.

- If a child touch a PDP on such place
while playing, PDP may fall and injury
the child.

Unplug when you do not use
your PDP for long time.

- If dust is stacked on a PDP, electric
shock or fire may be caused from heat,
fire, or deterioration of insulation.

Alert

When moving a PDP, 2 or more
people are advised to carry it.

- Injury or damage may be caused when a
PDP falls.

Consult a service center or
customer service for inside
cleaning about once a year.

- When dust is collected inside a PDP for
long time, fire or malfunction may be
caused.

65