Husqvarna PAC IV-10Y, PAC IV-14KM, PAC IV-11R, PAC IV-13.5R, PAC IV-14KC User Manual

...
IPL, PAC IV,2007-07, 542 20 11-32
PORT-A-CUT IV
Spare Parts Piezas de repuesto
PAC IV–14KM PAC IV–16KM PAC IV–16BV PAC IV–18H PAC IV–20H (Engine Mounted Fuel Tank)
PAC IV–20H (Cowl Mounted Fuel Tank)
This Document Supersedes ONLY The “Parts List” Section of Document P/N 0A7669 “PAC IV Operating Instruction & Parts List”.
Continue Usage Of P/N 0A7669 “Operating Instructions & Parts List” As “Operating Instructions” for 8KM, 9W, 10Y, 11R, 16BV, 18BV Models.
Este documento reemplaza SOLAMENTE a la “Lista de Piezas” del documento P/N 0A7669 “Instrucciones de Operación y Lista de Piezas del PAV IV”.
Continúa el uso de P/N 0A7669 “Instrucciones de Operación y Lista de Piezas” como “Instrucciones de Operación” para los modelos 8KM, 9W, 10Y, 11R, 16BV, 18BV.
542 20 11-32
HUSQVARNA CONSTRUCTION PRODUCTS
PARTS LIST INDEX
For quick supply of spare parts and to avoid any lost time, it is essential to quote the data on the manufacturer’s plate fixed to the machine and the part description to be replaced with every order.
PACIV-75E 7-1/2 HP Baldor Electric (3 Phase) PACIV-14KC
PACIV-8KM *
PACIV-9W *
PACIV-10Y **
PACIV-11R *
PACIV-13H 13 HP Honda
PACIV-13.5R 13.5 HP Robin
* Model Out Of Production – Shown For Service Parts Only ** 10Y Model Available Only Upon Special Request
DESCRIPTION PAGE
Warnings......................................................................................................................................... 4 - 5
Figures & Parts Lists & Wiring Diagrams:
Decal Descriptions and Locations.................................................................................................. 38 - 40
Engine Mounting Locations & Base Attaching Points .................................................................... 41
Option Availability Chart - Per Model ............................................................................................. 43 - 45
Repair and Spare Parts ........................................................................................................
Additional Warnings........................................................................................................................ Back Cover
Model Designation Key
Model POWER SOURCE Model POWER SOURCE
14 HP Kohler Command (Electric)
8 HP Kohler Magnum PACIV-14KCR
9 HP Wisconsin
PACIV-14KM *
10 HP Yanmar Diesel PACIV-16KM 16 HP Kohler Magnum
11 HP Robin
PACIV-16BV * PACIV-18BV *
PACIV-18H *
PACIV-20H 20 HP Honda
1. Frame Group....................................................................................................................6 - 9
2. Engine & Blade Shaft Group............................................................................................ 10 - 15
3. Drivematic Group ............................................................................................................. 16 – 18
4. Fuel Tank Group – 20H.................................................................................................... 19
5. Accessories...................................................................................................................... 20 - 21
6. Wide Cutting Kits (3/4 & 1 Wide) (Special Option)........................................................ 22 - 24
7. Electrical Components (7-1/2 Electric Model Only) ......................................................... 25
8. Wiring Diagram: 75E........................................................................................................ 26
9. Notes:............................................................................................................................... 27
10. Notes:............................................................................................................................... 27
11. Wiring Diagram: 8KM....................................................................................................... 28
12. Wiring Diagram: 9W......................................................................................................... 28
13. Wiring Diagram: 10Y........................................................................................................ 29
14. Wiring Diagram: 11R........................................................................................................29
15. Wiring Diagram: 13H........................................................................................................30
16. Wiring Diagram: 14KM..................................................................................................... 30
17. Wiring Diagram: 14KC ..................................................................................................... 31
18. Wiring Diagram: 14KCR...................................................................................................32
19. Wiring Diagram: 16KM..................................................................................................... 33
20. Wiring Diagram: 16BV / 18BV..........................................................................................34
21. Wiring Diagram: 18H & 20H.............................................................................................35
22. Wiring Diagram: 20H (Red Stripe Wire Harness)............................................................ 36
23. Wiring Diagram: 20H (Blue Stripe Wire Harness)............................................................37
14 HP Kohler Command (Recoil)
14 HP Kohler Magnum
16 HP Briggs & Stratton 18 HP Briggs & Stratton
18 HP Honda
......... 45
2
INDICE DE LA LISTA DE PIEZAS
Para una rápida provisión de las piezas de repuesto y para evitar cualquier pérdida de tiempo, con cada orden de compra es esencial mencionar los datos de la placa del fabricante fijada a la máquina y la
PACIV-75E 7-1/2 HP, Baldor Eléctrico (3 Fases) PACIV-14KC
PACIV-8KM *
PACIV-9W *
PACIV-10Y **
PACIV-11R *
PACIV-13H 13 HP, Honda
PACIV-13.5R 13.5 HP Robin
* Modelo fuera de producción – Se muestra para piezas de repuesto solamente ** Modelo 10Y disponible como pedido especial solamente
DESCRIPCION PAGINA
Advertencias....................................................................................................................................4 – 5
Listas de Ilustraciones y Piezas y Diagramas de Cableado:
Descripciones y Localizaciones de Calcomanías...........................................................................38 - 40
Localizaciones del Montaje del Motor y Puntos de Colocación de Bases......................................41
Tabla de Disponibilidad de Opciones - Por Modelo........................................................................43 - 45
Piezas de Repuesto y Reparación .................................................................................................45
Advertencias Adicionales.......................................................................................Cubierta Posterior
descripción de la pieza a ser reemplazada.
Clave de Designación de Modelos
Modelo FUENTE DE ENERGIA Modelo FUENTE DE ENERGIA
14 HP, Kohler Command (Electric)
8 HP, Kohler Magnum PACIV-14KCR
9 HP, Wisconsin
PACIV-14KM *
10 HP, Yanmar Diesel PACIV-16KM 16 HP, Kohler Magnum
11 HP, Robin
PACIV-16BV * PACIV-18BV *
PACIV-18H *
PACIV-20H 20 HP, Honda
1. Grupo de Marco................................................................................................................6 - 9
2. Grupo del Motor y Eje de la Hoja......................................................................................10 - 15
3. Transmisión Automática ...................................................................................................16 – 18
4. Grupo de tanque de combustible – 20H...........................................................................19
5. Accesorios.........................................................................................................................20 - 21
6. Equipos para Corte Ancho (3/4 y 1 de Ancho) (Opción Especial) ................................22 - 24
7. Componentes Eléctricos (Modelo Eléctrico 7-1/2 Solamente).........................................25
8. Diagrama de Cableado: 75E.............................................................................................26
9. Notas:................................................................................................................................27
10. Notas:................................................................................................................................27
11. Diagrama de Cableado: 8KM............................................................................................28
12. Diagrama de Cableado: 9W..............................................................................................28
13. Diagrama de Cableado: 10Y.............................................................................................29
14. Diagrama de Cableado: 11R ............................................................................................29
15. Diagrama de Cableado: 13H ............................................................................................30
16. Diagrama de Cableado: 14KM..........................................................................................30
17. Diagrama de Cableado: 14KC..........................................................................................31
18. Diagrama de Cableado: 14KCR .......................................................................................32
19. Diagrama de Cableado: 16KM..........................................................................................33
20. Diagrama de Cableado: 16BV / 18BV ..............................................................................34
21. Diagrama de Cableado: 18H / 20H...................................................................................35
22. Diagrama de Cableado: 20H ............................................................................................36
23. Diagrama de Cableado: 20H ............................................................................................37
14 HP, Kohler Command (Recoil)
14 HP, Kohler Magnum
16 HP, Briggs & Stratton 18 HP, Briggs & Stratton
18 HP, Honda
3
SAFETY FIRST!!
WARNINGS
WARNING: FAILURE TO COMPLY WITH THESE WARNINGS
AND INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS INJURY.
Each machine is supplied with an operating instruction manual. Operators and maintenance people of this equipment must read and be familiar with the safety warnings in the operation manual. Failure to obey the warnings may result in serious injury or death. Follow instructions strictly to ensure long service in normal operation. If you do not have an operator’s manual (P/N 0A7768), call TOLL FREE 1-800-288-5040.
Read the entire operator’s manual before operating this machine. Understand all the warnings, instructions and controls. If you do not have an operator’s manual (P/N 0A7768) call TOLL FREE 1-800-288-5040.
Always park the machine on a level surface with the engine “OFF” and the ignition switch set in the “OFF” position before performing any maintenance. Let the machine cool down! Disconnect battery!
The manufacturer accepts no responsibility caused by unsuitable use or modifications.
For repairs and service parts, contact you authorized DB/T dealer.
This saw was designed for certain applications only DO NOT modify this saw or use for any application other than for which it was designed. If you have any questions relative to its application, DO NOT use the saw until you have contacted Diamant Boart Inc. and we have advised you.
Husqvarna Construction Products North America
17400 West 119th Street
Olathe, Kansas 66061
Telephone: 1-800-288-5040
4
¡SEGURIDAD ANTE TODO!
ADVERTENCIAS
ADVERTENCIA: EL NO RESPETAR ESTAS ADVERTENCIAS E INSTRUCCIONES DE
OPERACION PUEDE PROVOCAR GRAVES LESIONES O LA MUERTE
Cada máquina se suministra con un manual de instrucciones de operación. Los operadores y los mecánicos de este equipo deben leer y familiarizarse con las advertencias de seguridad dadas en este manual. El no respetar las advertencias puede provocar graves lesiones o la muerte. Siga las instrucciones al pie de la letra para asegurar una larga vida de servicio durante operación normal. Si no tiene un manual del operador (N/P 0A7768), llame a su concesionario Target más cercano. Si se necesitan ejemplares adicionales, lammar SIN CARGO al 1-800-288-5040.
Lea todo este manual y familiarícese con el funcionamiento de la máquina antes de ponerla en marcha. Entienda todas las advertencias, instrucciones y controles. Si no tiene un manual del operador (N/P 0A7768), llame a su concesionario Target más cercano. Si se necesitan ejemplares adicionales, lammar SIN CARGO al 1-800-288-5040.
Siempre estacione la máquina en una superficie plana con el motor APAGADO y el interruptor de encendido puesto en la posición APAGADO (OFF) antes de hacer trabajos de mantenimiento en la máquina. ¡Deje que la máquina se enfríe! ¡Desconecte la batería! El fabricante no se hace responsable del uso o modificaciones indebidas!
El fabricante no se hace responsable del uso o modificaciones indebidas!
Para reparaciones y piezas de repuesto, póngase en contacto con el concesionario DB/T autorizado.
Esta sierra fue diseñada para ciertas aplicaciones solamente. NO la modifique ni utilice para ninguna otra aplicación salvo aquéllas para las cuales fue diseñada. En caso de dudas respecto a su aplicación, NO use la sierra sin antes haber consultado por escrito a Diamant Boart, Inc. y haber recibido nuestras indicaciones.
Husqvarna Construction Products North America
.
17400 West 119th Street
Olathe, Kansas 66061
1-800-288-5040
5
FIGURE 1 – Frame Group / Grupo de Marco
88
90
89
6
FIGURE 1 – Parts List (Items 1 - 62) (See Notes for Items Marked With “C” or “D”)
Diag Loc.
1
*1 167835 1 Frame Weldment (Metric) – Black
2 020551 2 Setscrew, Socket Hd., 5/16"-18 x 1/4" 37 167878 1 Spacer, Zinc Plated 3 139579 1 Axle, Rear 38 4 049923 2 Collar, Lock, 5/8" Bore *39 139761 2 Capscrew, Hex Hd., M6 x 1.0 x 20mm
4A 020551 2 Setscrew, Socket Hd., 5/16"-18 x 1/4" *40 139745 2 Locknut, Fiber, M6 x 1.0
5 020747 4 Washer, Flat, 5/8" USS
41 ------ --
6 040126 2 Wheel, 6" OD, 5/8" Bore 41C 139024 1 Crank, Handle (NLA use 177951) *7 167833 2 Support, Engine Base (Metric) 41D 177922 1 Crank, Handle *8 139749 6 Capscrew, Hex Hd., M10 x 1.5 x 25mm 42 020788 1 Lockwasher, Split, 1/2" *9 162004 6 Lockwasher, Split, M10 43 030210 1 Nut, Acorn, 1/2"-13 UNC
*10 167831 1 Base, Engine (Metric)
44 ------ --
*11 139741 4 Capscrew, Hex Hd., M12 x 1.75 x 30mm 44C 139022 1 Bolt, Shoulder, 1/2" DIA, 3/8"-16 UNC
12 020788 4 Lockwasher, Split, 1/2" 44D ------ -- -----------­13 020745 4 Washer, Flat, 1/2" 45 ------ --
*14 167439 1 Capscrew, Hex Hd, M12 x 1.75 x 100mm 45C 139100 1 Handle, Plastic, 3/8"-16 UNC *15 167819 3 Bracket, Guard Mounting (Metric) 45D 032250 1 Handle, Aluminum, Revolving (Press Fit)
*16 197227 6 Capscrew, Hex Hd., M8 x 1.25 x 20mm 46 139021 1 Valve, Water *17 020785 6 Lockwasher, Split, M8 47 020405 2 Screw, Round Hd, Phillips, #10-24 x 3/8"
18
18 167837 1 Shaft Guard Weldment
*19 177067 2 Capscrew, Hex Hd., M8 x 1.25 x 85mm 49 ------ -­*20 020785 2 Lockwasher, Split, M8 49C 020810 1 Fitting, 90 Street Elbow, 1/2" NPT
49D ------ -- -----------­21 167775 1 Front Axle Weldment 22 043260 2 Collar, 1" Bore 50 ------ --
*23 167781 2 Pivot Block (Metric) 50C 167897 1 Fitting, 90 Male Elbow, 1/2" NPT
24 041175 2 Grease Fitting 50D ------ -- ------------
*25 139749 4 Capscrew, Hex Hd., M10 x 1.5 x 25mm
51 ------ --
*26 162004 4 Lockwasher, Split, M10 51C 167960 1 Fitting, 45 Street Elbow, 1/2" NPT
27 020768 4 Washer, Flat, 3/4" SAE 51D ------ -- -----------­28 020614 2 Cotter Pin, 1/8" Dia x 1" Long 52 045642 1 Hose Fitting & Filter Washer 29 040091 2 Wheel, 5" DIA 30 160164 1 Pin, Yoke 53 ------ --
53C 167892 1 Hose Assy, 1/2" ID x 40" Long 31 020766 1 Washer, Flat, 1/2" SAE 53D 176177 1 Hose Assy, 1/2" ID x 49" Long 32 177239 1 Pin, Rue Ring,1/2" DIA
33 ------ --
33C 177026 1 Adjustment Nut w/ Fitting, 5/8-11UNC 33D 177954 1 Adjustment Nut w/ Fitting, 5/8-8 ACME
55 167908 1 Bar, Pointer, Offset - Black 34 ------ --
34C 040139 1 Grease Fitting 56 041231 1 Rod, Pointer, 3/8"-16 UNC 34D 163140 1 Grease Fitting (2-5/8” Long) 57 041220 1 Wheel, 3" Dia, w/Bushing
35 ------ --
35C 167789 1 Screw, Adjustment, 5/8-11UNC *59 139749 2 Capscrew, Hex Hd., M10 x 1.5 x 25mm 35D 177915 1 Screw, Adjustment, 5/8-8 ACME *60 139748 2 Locknut Fiber, M10 x 1.5
*61 197227 1 Capscrew, Hex Hd., M8 x 1.25 x 20mm
*62 139738 1 Locknut, Fiber, M8 x 1.25
Notes:
C) These Items (Marked with a C) Effective from First Unit Production (S/N 167250) To Approx. February, 2000. D) These Items (Marked with a D) Effective Spring (Approx. February) 2000.
Part
No.
502437901
502437801
Qty
Req Description (* Denotes Metric Item)
Diag Loc.
Part
No.
Qty
Req Description (* Denotes Metric Item)
1 Frame (Metric) – Husq Gray 36 020010 1 Key, Woodruff (ANSI #405)
542190434
1 Bearing, 1/2" Bore
Use Item 41C or 41D (See Note C or D)
Use Item 44C or 44D (See Note C or D)
Use Item 45C or 45D (See Note C or D)
Shaft Guard – Husq Gray 48 020782 2 Lockwasher, Split, #10
Use Item 49C or 49D (See Note C or D)
Use Item 50C or 50D (See Note C or D)
Use Item 51C or 51D (See Note C or D)
Use Item 53C or 53D (See Note C or D)
Use Item 33C or 33D (See Note C or D)
Use Item 34C or 34D (See Note C or D)
Use Item 35C or 35D (See Note C or D)
54
502437601
54 167906 1 Bar, Pointer, Straight - Black
55
502437701
58 020199 1 Locknut, Fiber, 3/8"-16 UNC
Bar, Pointer, Straight – Husq Gray
Bar, Pointer, Offset – Husq Gray
(REV 2-12-2007)
7
FIGURE 1 – Frame Group / Grupo de Marco
88
90
89
8
FIGURE 1 – Parts List (Items 63 - 99) (See Notes for Items Marked With “C” or “D”)
Diag Loc.
63 177025 1 Front Pointer Assy (# 54-59 & #89-92) 88 020762 2 Washer, Flat, 1/4" SAE 64 167911 1 Handle Bar Weldment 89 172137 1 Rope, 5/32" x 80" Long (Nylon) 65 139568 2 Grip, Handle Bar 90 162761 3 Clamp, Hose 66 177557 2 Knob, Handle, 3/8"-16 UNC 91 020136 1 Nut, Std. Hex, 3/8"-16
92 020786 1 Lockwasher, Split, 3/8"
67
67 ------ --
67C 167800 1 Control Panel Weldment, PC Blue 94 020766 1 Washer, Flat, 1/2" SAE 67D 177909 1 Control Panel Weldment, PC Black
*68 197227 9 Capscrew, Hex Hd., M8 x 1.25 x 20mm 95 ------ --
69 020763 9 Washer, Flat, 5/16" SAE 95C ------ -- ----------
*70 139738 9 Locknut, Fiber, M8 x 1.25 95D 177923 1 Latch, Crank Handle, Zinc Plated *71 177930 1 Cowl Weldment, PC Blue (Metric)
71
*72 139749 4 Capscrew, Hex Hd., M10 x 1.5 x 25mm 96 ------ --
96C ------ -- ----------
*73 173014 4 Washer, Flat, M10 96D 171710 1 *74 139748 4 Locknut, Fiber, M10 x 1.5
75
75 167807 1 Cover, Rear Cowl, PC Black (See Note “E”) 97C ------ -- ----------
*76 167925 4 Capscrew, Flange Hd., M8 x 1.25 x 30mm *77 139738 4 Locknut, Fiber, M8 x 1.25 98 ------ --
98C ------ -- ----------
78
78 167814 1 Shield, RH (See Note “E”)
*79 197227 3 Capscrew, Hex Hd., M8 x 1.25 x 20mm 99 ------ --
80 020785 3 Lockwasher, Split, 5/16" 99C ------ -- ---------­81 020763 3 Washer, Flat, 5/16" SAE 99D 139745 1 Locknut, Fiber, M6 x 1.00
82 82
167825 1 Belt Guard (Standard) 167969 1 Belt Guard (Tall) (5E,7.5E,14KM, 18-20H) 177002 1 Belt Guard (10Y Only) 177595 1 Belt Guard (14KCR)
*83 197227 5 Capscrew, Hex Hd., M8 x 1.25 x 20mm *84 020785 5 Lockwasher, Split, M8
85 020763 5 Washer, Flat, 5/16" SAE 86 163988 1 Wrench, 1-1/16" Open End
*87 197170 1 Wing Bolt, M6 x 1.0 x 16mm
Notes:
C) These Items (Marked with a C) Effective from First Unit Production (S/N 167250) To Approx. February, 2000). D) These Items (Marked with a D) Effective Spring (Approx. February, 2000). E) These Items Used Only On Drivematic Equipped Models Effective Spring (Approx. February) 2000. Eliminated from
Push Models – can be purchased separately for Push models Effective Spring 2000.
Part
No.
502437501
502437401
502437301
502447801
502444701 502444601
Qty
Re
Description (* Denotes Metric Item)
Diag Loc.
Part
No.
Qty
Req Description (* Denotes Metric Item)
q
1 Control Panel – Husq Gray
Use of Item 67C or 67D (See Note C or D)
93
041160 2
Collar, Lock, 3/4
" Bore
Use Item 95C or 95D (See Note C or D)
1 Cowl Weldment - Husq Orane
Use Item 96C or 96D (See Note C or D)
Washer, Wave Spring, .28 ID
97 ------ --
Use Item 97C or 97D (See Note C or D)
1 Cover, Rear Cowl, Husq Gray
97D 161531 1
Washer, Fiber, .75x.265x.093” Thick
Use Item 98C or 98D (See Note C or D)
1 Shield, RH – Husq Orange 98D 139761 1 Capscrew, Hex Hd., M6 x 1.00 x 20mm
Use Item 99C or 99D (See Note C or D)
1 Belt Guard (Standard) – Husq Orange 1 Belt Guard (Tall) – Husq Orange
(REV 2-12-2007)
9
FIGURE 2 – Engine & Blade Shaft Groups / Grupo del Motor y Eje de la Hoja
10
FIGURE 2 - Parts List (Items 1 – 12)
DIAG LOC.
PART
NO.
QTY REQ
DESCRIPTION
(* Denotes Metric Item)
DIAG LOC.
PART
NO.
QTY REQ
DESCRIPTION
(* Denotes Metric Item)
(REV 2-12-2007)
1 139214 1 Engine, 8KM *5 139765 4 Capscrew, Hex., M10x1.5x40mm — 011401 1 Engine, 9W (10Y, 13.5R, 16KM) — 177015 1 Engine, 10Y (Diesel) *–– 167748 4 Capscrew, Hex Hd., M10x1.5x65mm (18H, 20H) — 177118 1 Engine, 11R — 167821 1 Engine, 13H *––
725250001
— 196010 1 Engine, 13.5R
(For 20H, Before S/N 422140–See Note L)
4 Capscrew, Hex Hd., M10x1.5x45mm ( 20H)
(Eff S/N 422140 for 20H–See Note L)
167861 1 Engine, 14KC (Electric Start Only) *— 139766 4 Capscrew, Hex Hd, M10x1.5x45mm (11R, 13H) 177607 1 Engine, 14KCR (Recoil Start Only) *— 047792 4 Capscrew, Hex Hd, M10 x 1.5 x 30 mm (8KM) — 167996 1 Engine, 14KM *— 167749 4 Capscrew, Hex Hd, M10 x 1.5 x 90 mm (9W) — 139250 1 Engine, 16KM 020323 4 Capscrew, Hex Hd., 3/8-16UNC x 1” — 139697 1 Engine, 16BV (Full Thread) (14KC, 14KCR) — 167981 1 Engine, 18BV *–– 173058 4 Capscrew,Hex Hd.,M8x1.25x45mm (16BV, 18BV) 177282 1 Engine, 18H (No Longer Available) 177461 1 Engine, 20H (See Note J) 6 173014 4 Washer, Flat, M10 190334 1 Engine, 20H, Modified (See Note J)
(8KM, 9W, 10Y, 11R, 13H, 13.5R, 16KM, 20H)
190092 1 Engine, 20H (See Note J) 020743 4 Washer, Flat, 3/8" (14KC)
*— 020742 4 Washer, Flat, 5/16" (16BV, 18BV)
1A 020067 1 Key, 1/4" Sq. x 1-1/4"
020078 1 Key, 1/4" Sq. x 3/4" (14KM, 16KM) *7 139748 4 Locknut, Fiber, M10 x 1.5 — 177608 1 Key, Bevel, 1/4" Sq. x 2-5/8” (14KCR)
(8KM, 9W, 10Y, 11R, 13H, 13.5R, 16KM, 18H, 20H)
020786 4 Lockwasher, Split, 3/8" (14KC, 14KCR)
1B —------ 1 Element, Air Cleaner (See Note “A”) *— 020199 2 Locknut, Fiber, 3/8"-16 (14KM)
177528 1 Element, Air Cleaner (18H, 20H)
*8 167133 1 Fitting, M12 x 10mm Barb (13H)
2 177014 1 Motor, Electric (51E) *— 177065 1 Fitting Assy, M14 x 3/8” Barb (11R, 13.5R) — 000923 1 Motor, Electric (53E) 020819 1 Fitting, 3/8" NPT x 3/8" Barb — 167994 1 Motor, Electric (75E) (9W, 14KC, 14KCR, 16BV, 18BV)
177017 1 Fitting, 1/2" NPT x 3/8" Barb (8KM)
3 167746 1 Pulley, 3G3V2.65, 1GRL-1.00 w/SS 177018 1 Fitting, 3/4" NPT x 3/8" Barb (14KM,16KM)
(8KM, 10Y, 11R, 13H, 13.5R) –– –– 1 Fitting, Oil Drain (18H, 20H ) — 139298 1 Pulley, 3G3V3.15 - 1.125 w/SS (9W) (Honda # 15558-ZJ1-010AH) — 139288 1 Pulley, 3G3V2.65-1.125-w/SS 177019 1 Fitting Assy, M16 x 1.5 x 3/8" Barb (10Y)
(14KM, 14KC, 14KCR) 167942 1 Pulley, 4G3V2.65 - 1.125 w/SS *9 167305 1 Hose Assembly, Oil Drain (All except noted)
(16KM, 20H) (See Note J) –– 020967 1 Hose, Oil Drain (12") (18H, 20H Only) 167889 1 Pulley, 4G3V2.65-1.00 w/SS –– 167304 1 Hose Assembly, Oil Drain (14KCR)
(16BV, 18BV, 18H, 20H) (See Note J) 060139 1 Pulley, 2G3V2.65 - .875 w/SS (5E) 10 020049 1 Hose Clamp — 041134 1 Pulley, 3G3V2.80 - 1.375 w/SS (75E) *11 167307 1 Blanking Cap
*12 167623 1 Tube Nut, M16
3A 020550 2 Setscrew,Soc. Hd, 5/16-18 x 3/8" (5E, 7.5E)
020540 2 Setscrew,Soc. Hd,1/4-20 x 1/4" (13-20 HP) 020541 2 Setscrew, Soc. Hd, 1/4-20 x 3/8" (9 W)
4 161499 2 V-Belt, 3VX355 (51E, 53E) 163857 3 V-Belt, 3VX425 (75E) 163869 3 V-Belt, 3VX375 (10Y) 161499 3 V-Belt, 3VX355 (8KM, 11R, 13H, 13.5R, 14KC) 163857 3 V-Belt, 3VX425 (14KCR) — 172281 3 V-Belt, 3VX400 (9W, 14KM) — 163869 4 V-Belt, 3VX375 (16KM, 18H, 20H-See Note L)
(For 20H, Before S/N 422140–See Note L)
161499 2 V-Belt, 3VX355 (51E, 53E)
— 161499 4 V-Belt, 3VX355 (16BV, 18BV, 20H-See Note L)
(Eff S/N 422140 for 20H–See Note L)
See Notes on Page 15
11
FIGURE 2 – Engine & Blade Shaft Group / Grupo del Motor y Eje de la Hoja (Continued)
12
FIGURE 2- Parts List (Items 13 - 72)
DIAG LOC.
PART
NO.
13 164238 1 Clamp (Used On 1994 Models Only) –– 166673 1 Clamp, Insulated, 5/8” I.D. x 1/4" Hole (14kcr)
*14 139761 1 Capscrew, Hex Hd., M6 x 1.0 x 20mm
–– 163688 1 Capscrew, Hex Hd., M6 x 1.0 x 16mm (14kcr)
*15 139745 1 Locknut, Fiber, M6 x 1.0
139596 1 Front Blade Guard Weldment – 18” (Note H)
*16 167478 1 Capscrew, Hex Hd., M8 x 1.25 x 25mm
139749 4 Capscrew, Hex Hd., M10 x 1.5 x 25mm (14KCR) 17 020763 2 Washer, Flat, 5/16" SAE — 173014 4 Washer, Flat, M10 (14KCR)
*18 139738 1 Locknut, Fiber, M8 x 1.25
139748 4 Locknut, Fiber, M10 x 1.5 (14KCR)
*19 139749 3 Capscrew, Hex Hd., M10 x 1.5 x 25mm *20 173014 3 Washer, Flat, M10 *21 139748 3 Locknut, Fiber, M10 x 1.5
*22 139749 4 Capscrew, Hex Hd, M10 x 1.5 x 25mm (5E, 75E) *23 173014 4 Washer, Flat, M10 *24 139748 4 Locknut, Fiber, M10 x 1.5
25 167990 1 Motor Base (75E) — 177599 1 Engine Base (14KCR)
26 167992 2 Spacer, Engine (9W, 14KM, 18H, 20H) 27 020365 2 Capscrew, Hex Hd., 3/8"-16 x 2-1/4" 28 020323 2 Capscrew, Hex Hd.,3/8-16 x 1"(Full Thread) 29 020377 2 Capscrew, Hex Hd., 3/8"-16 x 1-1/2"
30 167894 1 Blade Shaft-Complete-3 Groove (5 – 14 HP) — 167893 1 Blade Shaft-Complete-4 Groove (16 – 20 HP) 31 167846 1 Nut, 5/8"-11UNC-LH Thread (Black Finish) 32 167962 1 Outer Collar w/ Drive Pin
32A 167964 1 Drive Pin, 3/8" Dia x 1-1/8" Long
33 167961 1 Blade Shaft w/ Inner Collars *60 167761 2 Capscrew, Hex Hd, M5 x 0.8 x 20mm
33A 167185 2 Inner Collar *61 172011 4 Nut, Standard Hex M5 x 0.8
34 020067 1 Key, 1/4" Sq. x 1-1/4" 62 020782 2 Lockwasher, Split, #10 35 167895 2 Bearing w/Collar & SS (Eccentric Lock) *63 197227 1 Capscrew, Hex Hd M8 x 1.25 x 20mm
*64 020785 1 Lockwasher, Split, M8
36 020540 2 Setscrew, Socket Hd., 1/4"-20 x 1/4"
*37 139752 4 Capscrew, Hex Hd., M10 x 1.5 x 75mm *65 167749 1 Capscrew, Hex Hd, M10 x 1.5 x 90mm *38 173014 4 Washer, Flat, M10 *66 162004 1 Lockwasher, Split, M10 *39 139748 4 Locknut, Fiber, M10 x 1.5 *67 173014 1 Washer, Flat, M10
68 139255 1 Battery, 12V, 230 CCA – WET 40 139300 1 Pulley, 3G3V3.65-1" w/SS (5 - 14HP ) -- 139255A 1 Battery, 12V, 230 CCA - DRY (Opt.) — 167896 1 Pulley, 4GR3V3.65-1" w/SS (16 - 20 HP)
40A 020541 2 Setscrew, Soc. Hd., 1/4"-20x3/8" (For 139300) *69 167786 1 Battery Box Weldment
020541 4 Setscrew, Soc. Hd., 1/4"-20x3/8" (For 167896) 70 167036 1 Strap, Battery Mount (Includes Item70A)
41 167847 1
QTY REQ
DESCRIPTION
(* Denotes Metric Item)
Nut, 5/8"-11UNC-RH Thread (Gray Finish)
DIAG LOC.
PART
NO.
*42 167943 1 Blade Guard Assy – 14” (Complete) *— 195129 1 Blade Guard - Compl – 18” Husq Gray *— 195140 1 Blade Guard - Compl – 20” Husq Gray
43
502447301
43
502447701
139076 1 Front Blade Guard Weldment – 14”
195120 1 Front Blade Guard Weldment – 18” (Note H) 180846 1 Front Blade Guard Weldment – 20” (Note H) 195134 1 Front Blade Guard Weldment – 20” (Note H) 44 ------ -- Rear Blade Guard - Not Available Use Item 42
45 139075 1 Hinge (Note H)
45A 195127 1 Hinge (Note H)
*46 139761 6 Capscrew, Hex Hd, M6 x 1.0 x 20mm (Note H)
*46A 167478 6 Capscrew, Hex Hd M8 x 1.25x25mm (Note H)
47 020762 6 Washer, Flat, 1/4" SAE (Note H)
*47A 173059 6 Washer, Flat, M8 (Note H)
*48 139745 6 Locknut, Fiber, M6 x 1.0 (Note H)
*48A 139748 7 Locknut, Fiber, M8 x 1.25 (Note H)
49 040275 1 Fitting, 3/8" NPT Male x 3/4" Male 50 139045 1 Manifold
51 139051 1 Gasket, Manifold *52 167551 4 Capscrew, Hex Hd, M6 x 1.0 x 40mm *53 139745 4 Locknut, Fiber, M6 x 1.0
54 167045 2 Water Tube -14"
167046 2 Water Tube -18" & 20"
55 020864 2 Plug, 1/8" NPT
56 049212 2 Clamp, Water Tube *57 167818 4 Screw, Flat Hd., M6 x 1.0 x 16mm *58 139745 4 Locknut, Fiber, M6 x 1.0
59 040330 1 Spring
70A 163248 1 Strip, Sponge Rubber (15 inches)
*71 197227 2 Capscrew, Hex Hd, M8 x 1.25 x 20mm
72 020785 2 Lockwasher, Split, 5/16”
See Notes on Page 15
QTY REQ
DESCRIPTION
(* Denotes Metric Item)
1 Blade Guard, Front – 18” Husq Gray 1 Blade Guard, Front – 20” Husq Gray
(REV 2-12-2007)
13
FIGURE 2 – Engine & Blade Shaft Group / Grupo del Motor y Eje de la Hoja (Continued)
14
FIGURE 2- Parts List (Items 73 - 105)
DIAG LOC.
PART
NO.
QTY REQ
DESCRIPTION
(* Denotes Metric Item)
DIAG LOC.
PART
NO.
QTY REQ
DESCRIPTION
(* Denotes Metric Item)
(REV 2-12-2007))
73 020763 2 Washer, Flat, 5/16” SAE 88 167959 1 Weight Kit (26 lbs.) (Optional)
*74 197227 2 Capscrew, Hex Hd., M8 x 1.25 x 20mm 89 180418 4 Weight Bar-1/2" Thick (6-1/2 lbs. Each)
75 020763 2 Washer, Flat, 5/16" SAE 2 Weight Bar-1" Thick (13 lbs. Each) *76 139738 2 Locknut, Fiber, M8 x 1.25 (1" Not Available Use 2 Of P/N 180418) *77 197227 1 Capscrew, Hex Hd., M8 x 1.25 x 20mm 90 020329 2 Capscrew, Hex Hd., 3/8"-16 x 2-3/4"
91 020199 2 Locknut, Fiber, 3/8"-16 78 020785 1 Lockwasher, Split, 5/16" 79 020763 1 Washer, Flat, 5/16" SAE 92 167963 1 Outer Collar Assy-1/2"Cut (Optional) 80 177063 1 Battery Cable (+) (RED) 93 167865 1 Outer Collar, 4.50 OD x 1/2" Cut ––
542190395
1 Battery Cable (+) (RED)(14KC,18H,20H) 94 020304 1 Drive Pin, 3/8" x 1-1/2"
*81 167891 1 Battery Cable, (-) (BLACK) 95 167189 1 Tiedown Bracket Kit (Optional) *82 163688 2 Capscrew, Hex Hd., M6 x 1.0 x 16mm 96 167125 2 Eyenut, Saw Tiedown, 3/8"-16UNC *83 139745 2 Locknut, Fiber, M6 x 1.0 97 020323 2 Capscrew, Hex Hd., 3/8"-16 x 1"
98 020786 2 Lockwasher, Split, 3/8" 84 167735 1 Ignition Switch w/ Key (16KM) –– 163830 1 Ignition Switch w/Key (18H, 20H ) (Notes C & F) 99 167985 1 Fitting, 45 Deg Street, 3/8" NPT (9W) –– 177920 1 Ignition Switch w/Key (18H, 20H ) (Notes D & F) 100 139098 1 Flap, Splash
*101 167761 2 Capscrew, Hex Hd., M5 x 0.8 x 20mm 85 139272 1 Wiring Harness (16KM) *102 173047 2 Washer, Flat, M5 –– 177283 1 Wiring Harness (18H, 20H) (See Notes C & G) *103 172316 2 Locknut, Fiber, M5 x 0.8 –– 177913 1 Wiring Harness (18H, 20H) (See Note D & G) ––
542190390
86 139156 1 Stop Switch Assembly (8KM)
1 Wiring Harness-20H (See Note K) 104 177066 2 Boot, Rubber – Battery
105 177068 2 Boot, Rubber – Cable (14KC Only)
139196 1 Stop Switch Assembly (9W) 177066 1 Boot, Rubber – Cable (18H, 20H) — 177021 1 Stop Switch Assembly (11R, 13H) 196019 1 Stop Switch Assembly (13.5R) Items Not Shown On Figure 2: 177022 1 Stop Switch Assembly (14KC) — 177612 1 Stop Switch Assembly (14KCR) — 177023 1 Stop Switch Assembly (14KM) — 167727 1 Stop Switch Assembly (16BV, 18BV)
167104 1 Guard, Muffler (Optional: 14KM, 16KM)
-- ------ 1 Regulator (18H, 20H)
(Honda P/N 31620-ZG5-003)
-- 166890 2 Capscrew, Hex Hd, M6 x 1.0 x 30mm **
-- 020762 2 Washer, Flat, ¼” SAE**
87 041317 1 Switch, Push-Button -- 139745 2 Locknut, Fiber, M6 x 1.0 **
** Use To Attach Regulator (18H, 20H)
Figure 2 Notes:
A) See Engine Distributor For Item 1B (Element) For The Following Models: 8KM, 9W, 10Y, 11R, 13H, 13.5R, 14KM, 14KCR,
C) These Items (Marked with a C) Effective from First Unit Production (S/N 167250) To Approx. February, 2000). D) These Items (Marked with a D) Effective Spring (Approx. February, 2000).
14KC, 16KM, 16BV, 18BV.
F) Ignition Switch P/N 163830 must be used with P/N 177283 Wiring Harness. Ignition Switch P/N 177920 must be used with
P/N 177913 Wiring Harness. When both items are serviced together it is suggested that the 177920 / 177913 part combination be used because the push-on wire connectors are easier to assemble.
G) Wiring Harness P/N 177913 can be identified by the RED stripe near the “engine end” of the harness. P/N 177283 does
not have a colored stripe.
H) For Item 45A, P/N 195127 Hinge (1/4” Thick) use P/N 195120 Front Guard Weldment, 18” or P/N 195134 Front Guard Weldment, 20” and M8
attaching hardware (Items 46A, 47A & 48A). For Item 45, P/N 139075 Hinge (1/8” Thick) use P/N 139228 Front Guard Weldment, 18” or P/N 174672 Front Guard Weldment, 20” and M6 attaching hardware (Items 46, 47 & 48).
J) Engine model changed for saws mfg. After 15November2002. P/N 177461 Engine has a 1.00” dia. Crankshaft and
requires P/N 167889 pulley (1.00” I.D.). Effective about 15November2002 with saw serial number 383022; units mfg. using P/N 190334 Engine and requires P/N 167942 pulley (1.125” I.D.). P/N’s 177461 & 190334 Engines (w/ Engine Mounted Fuel Tanks) Not Available as of April 2003. P/N 190092 Engine & Fuel Tank Group (See Figure 4) is the only replacement
K) Wiring Harness P/N 542190390 can be identified by a BLUE stripe at one end, & is used only with Engine P/N 190092.
for a complete older style engine.
L) PAC IV-20H Eff. S/N 422140 (Built about 10/11/2004): Eliminated P/N 167992 Spacer. Belt Changed to 161499 (3VX355).
15
Loading...
+ 33 hidden pages