IPL, PAC IV,2007-07, 542 20 11-32
PORT-A-CUT IV
|
|
|
Spare Parts |
|
|
|
Piezas de repuesto |
PAC IV–75E |
PAC IV–8KM |
PAC IV–9W |
PAC IV–10Y |
PAC IV–11R |
PAC IV–13H |
PAC IV-13.5R |
PAC IV–14KC |
PAC IV–14KCR |
PAC IV–14KM |
PAC IV–16KM |
PAC IV–16BV |
PAC IV–18BV |
PAC IV–18H |
PAC IV–20H (Engine Mounted Fuel Tank) |
|
|
|
PAC IV–20H (Cowl Mounted Fuel Tank) |
This Document Supersedes ONLY The “Parts List” Section of
Document P/N 0A7669 “PAC IV Operating Instruction & Parts List”.
Continue Usage Of P/N 0A7669 “Operating Instructions & Parts List” As “Operating Instructions” for 8KM, 9W, 10Y, 11R, 16BV, 18BV Models.
Este documento reemplaza SOLAMENTE a la “Lista de Piezas” del documento P/N 0A7669 “Instrucciones de Operación y Lista de Piezas del PAV IV”.
Continúa el uso de P/N 0A7669 “Instrucciones de Operación y Lista de Piezas” como “Instrucciones de Operación” para los modelos 8KM, 9W, 10Y, 11R, 16BV, 18BV.
542 20 11-32
HUSQVARNA CONSTRUCTION PRODUCTS
PARTS LIST INDEX
For quick supply of spare parts and to avoid any lost time, it is essential to quote the data on the manufacturer’s plate fixed to the machine and the part description to be replaced with every order.
Model Designation Key
|
Model |
|
POWER SOURCE |
|
Model |
POWER SOURCE |
|
|||
|
PACIV-75E |
|
7-1/2 HP Baldor Electric (3 Phase) |
|
PACIV - 14KC |
14 HP Kohler Command (Electric) |
|
|||
PACIV-8KM * |
|
8 HP Kohler Magnum |
|
PACIV - 14KCR |
14 HP Kohler Command (Recoil) |
|
||||
|
PACIV-9W * |
|
9 HP Wisconsin |
|
PACIV - 14KM * |
14 HP Kohler Magnum |
|
|||
PACIV-10Y ** |
|
10 HP Yanmar Diesel |
|
PACIV - 16KM |
16 HP Kohler Magnum |
|
||||
|
PACIV-11R * |
|
11 HP Robin |
|
PACIV - 16BV * |
16 HP Briggs & Stratton |
|
|||
|
PACIV-13H |
|
13 HP Honda |
|
PACIV - 18BV * |
18 HP Briggs & Stratton |
|
|||
PACIV-13.5R |
|
13.5 HP Robin |
|
PACIV - 18H * |
18 HP Honda |
|
|
|
||
|
|
|
|
|
|
PACIV - 20H |
20 HP Honda |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Model Out Of Production – Shown For Service Parts Only |
|
|
|
|
||||||
** 10Y Model Available Only Upon Special Request |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|||
|
DESCRIPTION |
|
|
|
PAGE |
|
||||
|
Warnings......................................................................................................................................... |
|
|
|
4 - 5 |
|
|
|||
|
Figures & Parts Lists & Wiring Diagrams: |
|
|
|
|
|
||||
1. |
Frame Group .................................................................................................................... |
|
6 - 9 |
|
|
|||||
2. |
Engine & Blade Shaft Group ............................................................................................ |
|
10 - 15 |
|
||||||
3. |
Drivematic Group ............................................................................................................. |
|
16 |
– 18 |
|
|||||
4. |
Fuel Tank Group – 20H.................................................................................................... |
|
19 |
|
|
|
||||
5. |
Accessories ...................................................................................................................... |
|
20 - 21 |
|
||||||
6. |
Wide Cutting Kits (3/4″ & 1″ Wide) (Special Option)........................................................ |
22 |
- 24 |
|
||||||
7. |
Electrical Components (7-1/2 Electric Model Only) ......................................................... |
25 |
|
|
|
|||||
8. |
Wiring Diagram: 75E ........................................................................................................ |
|
26 |
|
|
|
||||
9. |
Notes: ............................................................................................................................... |
|
|
|
27 |
|
|
|
||
10. |
Notes: ............................................................................................................................... |
|
|
|
27 |
|
|
|
||
11. |
Wiring Diagram: 8KM ....................................................................................................... |
|
28 |
|
|
|
||||
12. |
Wiring Diagram: 9W ......................................................................................................... |
|
28 |
|
|
|
||||
13. |
Wiring Diagram: 10Y ........................................................................................................ |
|
29 |
|
|
|
||||
14. |
Wiring Diagram: 11R........................................................................................................ |
|
29 |
|
|
|
||||
15. |
Wiring Diagram: 13H........................................................................................................ |
|
30 |
|
|
|
||||
16. |
Wiring Diagram: 14KM ..................................................................................................... |
|
30 |
|
|
|
||||
17. |
Wiring Diagram: 14KC ..................................................................................................... |
|
31 |
|
|
|
||||
18. |
Wiring Diagram: 14KCR................................................................................................... |
|
32 |
|
|
|
||||
19. |
Wiring Diagram: 16KM ..................................................................................................... |
|
33 |
|
|
|
||||
20. |
Wiring Diagram: 16BV / 18BV.......................................................................................... |
|
34 |
|
|
|
||||
21. |
Wiring Diagram: 18H & 20H............................................................................................. |
|
35 |
|
|
|
||||
22. |
Wiring Diagram: 20H (Red Stripe Wire Harness) |
............................................................ |
36 |
|
|
|
||||
23. |
Wiring Diagram: 20H (Blue Stripe Wire Harness)............................................................ |
|
37 |
|
|
|
||||
|
Decal Descriptions and Locations .................................................................................................. |
|
38 - 40 |
|
||||||
|
Engine Mounting Locations & Base Attaching Points .................................................................... |
|
41 |
|
|
|
||||
|
Option Availability Chart - Per Model ............................................................................................. |
|
43 - 45 |
|
||||||
|
Repair and Spare Parts ................................................................................................................. |
|
45 |
|
|
|
||||
|
Additional Warnings........................................................................................................................ |
|
Back Cover |
|
2
INDICE DE LA LISTA DE PIEZAS
Para una rápida provisión de las piezas de repuesto y para evitar cualquier pérdida de tiempo, con cada orden de compra es esencial mencionar los datos de la placa del fabricante fijada a la máquina y la descripción de la pieza a ser reemplazada.
Clave de Designación de Modelos
|
Modelo |
|
FUENTE DE ENERGIA |
Modelo |
FUENTE DE ENERGIA |
|
|||
|
PACIV-75E |
|
7-1/2 HP, Baldor Eléctrico (3 Fases) |
PACIV-14KC |
14 HP, Kohler Command (Electric) |
||||
PACIV-8KM * |
|
8 HP, Kohler Magnum |
PACIV-14KCR |
14 HP, Kohler Command (Recoil) |
|||||
|
PACIV-9W * |
|
9 HP, Wisconsin |
PACIV-14KM * |
14 HP, Kohler Magnum |
||||
PACIV-10Y ** |
|
10 HP, Yanmar Diesel |
PACIV-16KM |
16 HP, Kohler Magnum |
|||||
|
PACIV-11R * |
|
11 HP, Robin |
PACIV-16BV * |
16 HP, Briggs & Stratton |
||||
|
PACIV-13H |
|
13 HP, Honda |
PACIV-18BV * |
18 HP, Briggs & Stratton |
||||
PACIV-13.5R |
|
13.5 HP Robin |
PACIV-18H * |
18 HP, Honda |
|
|
|
||
|
|
|
|
|
PACIV-20H |
20 HP, Honda |
|
|
|
|
|
|
|
|
|
|
|
||
* Modelo fuera de producción – Se muestra para piezas de repuesto solamente |
|
|
|
||||||
** Modelo 10Y disponible como pedido especial solamente |
|
|
|
|
|||||
|
|
|
|
|
|
||||
|
DESCRIPCION |
|
|
PAGINA |
|||||
|
Advertencias.................................................................................................................................... |
|
|
4 – 5 |
|
||||
|
Listas de Ilustraciones y Piezas y Diagramas de Cableado: |
|
|
|
|
||||
1. |
Grupo de Marco ................................................................................................................ |
|
6 - 9 |
|
|
||||
2. |
Grupo del Motor y Eje de la Hoja...................................................................................... |
|
10 - 15 |
|
|
||||
3. |
Transmisión Automática ................................................................................................... |
|
16 |
– 18 |
|||||
4. |
Grupo de tanque de combustible – 20H ........................................................................... |
|
19 |
|
|
|
|||
5. |
Accesorios......................................................................................................................... |
|
20 - 21 |
|
|
||||
6. |
Equipos para Corte Ancho (3/4″ y 1″ de Ancho) (Opción Especial) |
................................22 |
- 24 |
|
|
||||
7. |
Componentes Eléctricos (Modelo Eléctrico 7-1/2 Solamente) ......................................... |
25 |
|
|
|
||||
8. |
Diagrama de Cableado: 75E............................................................................................. |
|
26 |
|
|
|
|||
9. |
Notas:................................................................................................................................ |
|
|
27 |
|
|
|
||
10. |
Notas:................................................................................................................................ |
|
|
27 |
|
|
|
||
11. |
Diagrama de Cableado: 8KM............................................................................................ |
|
28 |
|
|
|
|||
12. |
Diagrama de Cableado: 9W.............................................................................................. |
|
28 |
|
|
|
|||
13. |
Diagrama de Cableado: 10Y............................................................................................. |
|
29 |
|
|
|
|||
14. |
Diagrama de Cableado: 11R ............................................................................................ |
|
29 |
|
|
|
|||
15. |
Diagrama de Cableado: 13H ............................................................................................ |
|
30 |
|
|
|
|||
16. |
Diagrama de Cableado: 14KM.......................................................................................... |
|
30 |
|
|
|
|||
17. |
Diagrama de Cableado: 14KC.......................................................................................... |
|
31 |
|
|
|
|||
18. |
Diagrama de Cableado: 14KCR ....................................................................................... |
|
32 |
|
|
|
|||
19. |
Diagrama de Cableado: 16KM.......................................................................................... |
|
33 |
|
|
|
|||
20. |
Diagrama de Cableado: 16BV / 18BV .............................................................................. |
|
34 |
|
|
|
|||
21. |
Diagrama de Cableado: 18H / 20H................................................................................... |
|
35 |
|
|
|
|||
22. |
Diagrama de Cableado: 20H ............................................................................................ |
|
36 |
|
|
|
|||
23. |
Diagrama de Cableado: 20H ............................................................................................ |
|
37 |
|
|
|
|||
|
Descripciones y Localizaciones de Calcomanías ........................................................................... |
|
38 |
- 40 |
|
|
|||
|
Localizaciones del Montaje del Motor y Puntos de Colocación de Bases...................................... |
41 |
|
|
|
||||
|
Tabla de Disponibilidad de Opciones - Por Modelo........................................................................ |
|
43 |
- 45 |
|
|
|||
|
Piezas de Repuesto y Reparación ................................................................................................. |
|
45 |
|
|
|
|||
Advertencias Adicionales ....................................................................................... |
|
Cubierta Posterior |
|
|
|
3
SAFETY FIRST!!
WARNINGS
WARNING: FAILURE TO COMPLY WITH THESE WARNINGS AND INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS INJURY.
Each machine is supplied with an operating instruction manual. Operators and maintenance people of this equipment must read and be familiar with the safety warnings in the operation manual. Failure to obey the warnings may result in serious injury or death. Follow instructions strictly to ensure long service in normal operation. If you do not have an operator’s manual (P/N 0A7768), call TOLL FREE 1-800-288-5040.
Read the entire operator’s manual before operating this machine. Understand all the warnings, instructions and controls. If you do not have an operator’s manual (P/N 0A7768) call TOLL FREE 1-800-288-5040.
Always park the machine on a level surface with the engine “OFF” and the ignition switch set in the “OFF” position before performing any maintenance. Let the machine cool down! Disconnect battery!
The manufacturer accepts no responsibility caused by unsuitable use or modifications.
For repairs and service parts, contact you authorized DB/T dealer.
This saw was designed for certain applications only DO NOT modify this saw or use for any application other than for which it was designed. If you have any questions relative to its application, DO NOT use the saw until you have contacted Diamant Boart Inc. and we have advised you.
Husqvarna Construction Products North America
17400 West 119th Street
Olathe, Kansas 66061
Telephone: 1-800-288-5040
4
¡SEGURIDAD ANTE TODO!
ADVERTENCIAS
ADVERTENCIA: EL NO RESPETAR ESTAS ADVERTENCIAS E INSTRUCCIONES DE OPERACION PUEDE PROVOCAR GRAVES LESIONES O LA MUERTE.
Cada máquina se suministra con un manual de instrucciones de operación. Los operadores y los mecánicos de este equipo deben leer y familiarizarse con las advertencias de seguridad dadas en este manual. El no respetar las advertencias puede provocar graves lesiones o la muerte. Siga las instrucciones al pie de la letra para asegurar una larga vida de servicio durante operación normal. Si no tiene un manual del operador (N/P 0A7768), llame a su concesionario Target más cercano. Si se necesitan ejemplares adicionales, lammar SIN CARGO al 1-800-288-5040.
Lea todo este manual y familiarícese con el funcionamiento de la máquina antes de ponerla en marcha. Entienda todas las advertencias, instrucciones y controles. Si no tiene un manual del operador (N/P 0A7768), llame a su concesionario Target más cercano. Si se necesitan ejemplares adicionales, lammar SIN CARGO al 1-800-288-5040.
Siempre estacione la máquina en una superficie plana con el motor APAGADO y el interruptor de encendido puesto en la posición APAGADO (OFF) antes de hacer trabajos de mantenimiento en la máquina. ¡Deje que la máquina se enfríe! ¡Desconecte la batería! El fabricante no se hace responsable del uso o modificaciones indebidas!
El fabricante no se hace responsable del uso o modificaciones indebidas!
Para reparaciones y piezas de repuesto, póngase en contacto con el concesionario DB/T autorizado.
Esta sierra fue diseñada para ciertas aplicaciones solamente. NO la modifique ni utilice para ninguna otra aplicación salvo aquéllas para las cuales fue diseñada. En caso de dudas respecto a su aplicación, NO use la sierra sin antes haber consultado por escrito a Diamant Boart, Inc. y haber recibido nuestras indicaciones.
Husqvarna Construction Products North America
17400 West 119th Street
Olathe, Kansas 66061
1-800-288-5040
5
FIGURE 1 – Frame Group / Grupo de Marco
88
90
89
6
FIGURE 1 – Parts List (Items 1 - 62) (See Notes for Items Marked With “C” or “D”)
|
|
|
|
|
|
|
(REV 2-12-2007) |
Diag |
Part |
Qty |
|
Diag |
Part |
Qty |
|
Loc. |
No. |
Req |
Description (* Denotes Metric Item) |
Loc. |
No. |
Req |
Description (* Denotes Metric Item) |
1 |
502437901 |
1 |
Frame (Metric) – Husq Gray |
36 |
020010 |
1 |
Key, Woodruff (ANSI #405) |
*1 |
167835 |
1 |
Frame Weldment (Metric) – Black |
|
|
|
|
2 |
020551 |
2 |
Setscrew, Socket Hd., 5/16"-18 x 1/4" |
37 |
167878 |
1 |
Spacer, Zinc Plated |
3 |
139579 |
1 |
Axle, Rear |
38 |
542190434 |
1 |
Bearing, 1/2" Bore |
4 |
049923 |
2 |
Collar, Lock, 5/8" Bore |
*39 |
139761 |
2 |
Capscrew, Hex Hd., M6 x 1.0 x 20mm |
4A |
020551 |
2 |
Setscrew, Socket Hd., 5/16"-18 x 1/4" |
*40 |
139745 |
2 |
Locknut, Fiber, M6 x 1.0 |
5 |
020747 |
4 |
Washer, Flat, 5/8" USS |
41 |
------ |
-- |
Use Item 41C or 41D (See Note C or D) |
|
|
|
|
||||
6 |
040126 |
2 |
Wheel, 6" OD, 5/8" Bore |
41C |
139024 |
1 |
Crank, Handle (NLA use 177951) |
*7 |
167833 |
2 |
Support, Engine Base (Metric) |
41D |
177922 |
1 |
Crank, Handle |
*8 |
139749 |
6 |
Capscrew, Hex Hd., M10 x 1.5 x 25mm |
42 |
020788 |
1 |
Lockwasher, Split, 1/2" |
*9 |
162004 |
6 |
Lockwasher, Split, M10 |
43 |
030210 |
1 |
Nut, Acorn, 1/2"-13 UNC |
*10 |
167831 |
1 |
Base, Engine (Metric) |
44 |
------ |
-- |
Use Item 44C or 44D (See Note C or D) |
|
|
|
|
||||
*11 |
139741 |
4 |
Capscrew, Hex Hd., M12 x 1.75 x 30mm |
44C |
139022 |
1 |
Bolt, Shoulder, 1/2" DIA, 3/8"-16 UNC |
12 |
020788 |
4 |
Lockwasher, Split, 1/2" |
44D |
------ |
-- |
------------ |
13 |
020745 |
4 |
Washer, Flat, 1/2" |
45 |
------ |
-- |
Use Item 45C or 45D (See Note C or D) |
*14 |
167439 |
1 |
Capscrew, Hex Hd, M12 x 1.75 x 100mm |
45C |
139100 |
1 |
Handle, Plastic, 3/8"-16 UNC |
*15 |
167819 |
3 |
Bracket, Guard Mounting (Metric) |
45D |
032250 |
1 |
Handle, Aluminum, Revolving (Press Fit) |
*16 |
197227 |
6 |
Capscrew, Hex Hd., M8 x 1.25 x 20mm |
46 |
139021 |
1 |
Valve, Water |
*17 |
020785 |
6 |
Lockwasher, Split, M8 |
47 |
020405 |
2 |
Screw, Round Hd, Phillips, #10-24 x 3/8" |
18 |
502437801 |
|
Shaft Guard – Husq Gray |
48 |
020782 |
2 |
Lockwasher, Split, #10 |
18 |
167837 |
1 |
Shaft Guard Weldment |
|
|
|
Use Item 49C or 49D (See Note C or D) |
*19 |
177067 |
2 |
Capscrew, Hex Hd., M8 x 1.25 x 85mm |
49 |
------ |
-- |
|
*20 |
020785 |
2 |
Lockwasher, Split, M8 |
49C |
020810 |
1 |
Fitting, 90 Street Elbow, 1/2" NPT |
21 |
167775 |
1 |
Front Axle Weldment |
49D |
------ |
-- |
------------ |
|
|
|
Use Item 50C or 50D (See Note C or D) |
||||
22 |
043260 |
2 |
Collar, 1" Bore |
50 |
------ |
-- |
|
*23 |
167781 |
2 |
Pivot Block (Metric) |
50C |
167897 |
1 |
Fitting, 90 Male Elbow, 1/2" NPT |
24 |
041175 |
2 |
Grease Fitting |
50D |
------ |
-- |
------------ |
*25 |
139749 |
4 |
Capscrew, Hex Hd., M10 x 1.5 x 25mm |
51 |
------ |
-- |
Use Item 51C or 51D (See Note C or D) |
|
|
|
|
||||
*26 |
162004 |
4 |
Lockwasher, Split, M10 |
51C |
167960 |
1 |
Fitting, 45 Street Elbow, 1/2" NPT |
27 |
020768 |
4 |
Washer, Flat, 3/4" SAE |
51D |
------ |
-- |
------------ |
28 |
020614 |
2 |
Cotter Pin, 1/8" Dia x 1" Long |
52 |
045642 |
1 |
Hose Fitting & Filter Washer |
29 |
040091 |
2 |
Wheel, 5" DIA |
|
|
|
Use Item 53C or 53D (See Note C or D) |
30 |
160164 |
1 |
Pin, Yoke |
53 |
------ |
-- |
|
|
|
|
|
53C |
167892 |
1 |
Hose Assy, 1/2" ID x 40" Long |
31 |
020766 |
1 |
Washer, Flat, 1/2" SAE |
53D |
176177 |
1 |
Hose Assy, 1/2" ID x 49" Long |
32 |
177239 |
1 |
Pin, Rue Ring,1/2" DIA |
54 |
502437601 |
|
Bar, Pointer, Straight – Husq Gray |
|
|
|
Use Item 33C or 33D (See Note C or D) |
|
|||
33 |
------ |
-- |
54 |
167906 |
1 |
Bar, Pointer, Straight - Black |
|
33C |
177026 |
1 |
Adjustment Nut w/ Fitting, 5/8-11UNC |
55 |
|
|
|
33D |
177954 |
1 |
Adjustment Nut w/ Fitting, 5/8-8 ACME |
502437701 |
|
Bar, Pointer, Offset – Husq Gray |
|
34 |
------ |
-- |
Use Item 34C or 34D (See Note C or D) |
55 |
167908 |
1 |
Bar, Pointer, Offset - Black |
|
|
|
|
||||
34C |
040139 |
1 |
Grease Fitting |
56 |
041231 |
1 |
Rod, Pointer, 3/8"-16 UNC |
34D |
163140 |
1 |
Grease Fitting (2-5/8” Long) |
57 |
041220 |
1 |
Wheel, 3" Dia, w/Bushing |
35 |
------ |
-- |
Use Item 35C or 35D (See Note C or D) |
58 |
020199 |
1 |
Locknut, Fiber, 3/8"-16 UNC |
35C |
167789 |
1 |
Screw, Adjustment, 5/8-11UNC |
*59 |
139749 |
2 |
Capscrew, Hex Hd., M10 x 1.5 x 25mm |
35D |
177915 |
1 |
Screw, Adjustment, 5/8-8 ACME |
*60 |
139748 |
2 |
Locknut Fiber, M10 x 1.5 |
|
|
|
|
*61 |
197227 |
1 |
Capscrew, Hex Hd., M8 x 1.25 x 20mm |
|
|
|
|
*62 |
139738 |
1 |
Locknut, Fiber, M8 x 1.25 |
Notes:
C)These Items (Marked with a C) Effective from First Unit Production (S/N 167250) To Approx. February, 2000.
D)These Items (Marked with a D) Effective Spring (Approx. February) 2000.
7
FIGURE 1 – Frame Group / Grupo de Marco
88
90
89
8
FIGURE 1 – Parts List (Items 63 - 99) (See Notes for Items Marked With “C” or “D”)
|
|
|
|
|
|
|
(REV 2-12-2007) |
|
Diag |
Part |
Qty |
|
Diag |
Part |
Qty |
|
|
Loc. |
No. |
Re |
Description (* Denotes Metric Item) |
Loc. |
No. |
Req |
Description (* Denotes Metric Item) |
|
|
|
q |
|
|
020762 |
|
Washer, Flat, 1/4" SAE |
|
63 |
177025 |
1 |
Front Pointer Assy (# 54-59 & #89-92) |
88 |
2 |
|||
64 |
167911 |
1 |
Handle Bar Weldment |
89 |
172137 |
1 |
Rope, 5/32" x 80" Long (Nylon) |
|
65 |
139568 |
2 |
Grip, Handle Bar |
90 |
162761 |
3 |
Clamp, Hose |
|
66 |
177557 |
2 |
Knob, Handle, 3/8"-16 UNC |
91 |
020136 |
1 |
Nut, Std. Hex, 3/8"-16 |
|
67 |
502437501 |
1 |
Control Panel – Husq Gray |
92 |
020786 |
1 |
Lockwasher, Split, 3/8" |
|
|
|
|
|
|||||
67 |
------ |
-- |
Use of Item 67C or 67D (See Note C or D) |
93 |
041160 |
2 |
Collar, Lock, 3/4" Bore |
|
67C |
167800 |
1 |
Control Panel Weldment, PC Blue |
94 |
020766 |
1 |
Washer, Flat, 1/2" SAE |
|
67D |
177909 |
1 |
Control Panel Weldment, PC Black |
|
|
|
Use Item 95C or 95D (See Note C or D) |
|
*68 |
197227 |
9 |
Capscrew, Hex Hd., M8 x 1.25 x 20mm |
95 |
------ |
-- |
||
69 |
020763 |
9 |
Washer, Flat, 5/16" SAE |
95C |
------ |
-- |
---------- |
|
*70 |
139738 |
9 |
Locknut, Fiber, M8 x 1.25 |
95D |
177923 |
1 |
Latch, Crank Handle, Zinc Plated |
|
*71 |
177930 |
1 |
Cowl Weldment, PC Blue (Metric) |
|
|
|
|
|
71 |
502437401 |
1 |
Cowl Weldment - Husq Orane |
|
|
|
Use Item 96C or 96D (See Note C or D) |
|
*72 |
139749 |
4 |
Capscrew, Hex Hd., M10 x 1.5 x 25mm |
96 |
------ |
-- |
||
|
|
|
|
96C |
------ |
-- |
---------- |
|
*73 |
173014 |
4 |
Washer, Flat, M10 |
96D |
171710 |
1 |
Washer, Wave Spring, .28 ID |
|
*74 |
139748 |
4 |
Locknut, Fiber, M10 x 1.5 |
97 |
------ |
-- |
Use Item 97C or 97D (See Note C or D) |
|
75 |
502437301 |
1 |
Cover, Rear Cowl, Husq Gray |
|||||
|
|
|
|
|||||
75 |
167807 |
1 |
Cover, Rear Cowl, PC Black (See Note “E”) |
97C |
------ |
-- |
---------- |
|
*76 |
167925 |
4 |
Capscrew, Flange Hd., M8 x 1.25 x 30mm |
97D |
161531 |
1 |
Washer, Fiber, .75x.265x.093” Thick |
|
|
|
|
Use Item 98C or 98D (See Note C or D) |
|||||
*77 |
139738 |
4 |
Locknut, Fiber, M8 x 1.25 |
98 |
------ |
-- |
||
78 |
|
|
|
98C |
------ |
-- |
---------- |
|
502447801 |
1 |
Shield, RH – Husq Orange |
98D |
139761 |
1 |
Capscrew, Hex Hd., M6 x 1.00 x 20mm |
||
78 |
167814 |
1 |
Shield, RH (See Note “E”) |
|
|
|
Use Item 99C or 99D (See Note C or D) |
|
*79 |
197227 |
3 |
Capscrew, Hex Hd., M8 x 1.25 x 20mm |
99 |
------ |
-- |
||
80 |
020785 |
3 |
Lockwasher, Split, 5/16" |
99C |
------ |
-- |
---------- |
|
81 |
020763 |
3 |
Washer, Flat, 5/16" SAE |
99D |
139745 |
1 |
Locknut, Fiber, M6 x 1.00 |
|
82 |
502444701 |
1 |
Belt Guard (Standard) – Husq Orange |
|
|
|
|
|
82 |
502444601 |
1 |
Belt Guard (Tall) – Husq Orange |
|
|
|
|
|
— |
167825 |
1 |
Belt Guard (Standard) |
|
|
|
|
|
— |
167969 |
1 |
Belt Guard (Tall) (5E,7.5E,14KM, 18-20H) |
|
|
|
|
|
— |
177002 |
1 |
Belt Guard (10Y Only) |
|
|
|
|
|
— |
177595 |
1 |
Belt Guard (14KCR) |
|
|
|
|
|
*83 |
197227 |
5 |
Capscrew, Hex Hd., M8 x 1.25 x 20mm |
|
|
|
|
|
*84 |
020785 |
5 |
Lockwasher, Split, M8 |
|
|
|
|
|
85 |
020763 |
5 |
Washer, Flat, 5/16" SAE |
|
|
|
|
|
86 |
163988 |
1 |
Wrench, 1-1/16" Open End |
|
|
|
|
|
*87 |
197170 |
1 |
Wing Bolt, M6 x 1.0 x 16mm |
|
|
|
|
Notes:
C)These Items (Marked with a C) Effective from First Unit Production (S/N 167250) To Approx. February, 2000).
D)These Items (Marked with a D) Effective Spring (Approx. February, 2000).
E)These Items Used Only On Drivematic Equipped Models Effective Spring (Approx. February) 2000. Eliminated from Push Models – can be purchased separately for Push models Effective Spring 2000.
9
FIGURE 2 – Engine & Blade Shaft Groups / Grupo del Motor y Eje de la Hoja
10
FIGURE 2 - Parts List (Items 1 – 12)
|
|
|
|
|
|
|
(REV 2-12-2007) |
|
|
|
|
|
PART |
|
|
DIAG |
PART |
QTY |
|
DIAG |
QTY |
|
|
LOC. |
NO. |
REQ |
DESCRIPTION (* Denotes Metric Item) |
LOC. |
NO. |
REQ |
DESCRIPTION (* Denotes Metric Item) |
1 |
139214 |
1 |
Engine, 8KM |
*5 |
139765 |
4 |
Capscrew, Hex., M10x1.5x40mm |
— |
011401 |
1 |
Engine, 9W |
|
|
|
(10Y, 13.5R, 16KM) |
— |
177015 |
1 |
Engine, 10Y (Diesel) |
*–– |
167748 |
4 |
Capscrew, Hex Hd., M10x1.5x65mm (18H, 20H) |
— |
177118 |
1 |
Engine, 11R |
|
|
|
(For 20H, Before S/N 422140–See Note L) |
— |
167821 |
1 |
Engine, 13H |
*–– |
725250001 |
4 |
Capscrew, Hex Hd., M10x1.5x45mm ( 20H) |
— |
196010 |
1 |
Engine, 13.5R |
|
|
|
(Eff S/N 422140 for 20H–See Note L) |
— |
167861 |
1 |
Engine, 14KC (Electric Start Only) |
*— |
139766 |
4 |
Capscrew, Hex Hd, M10x1.5x45mm (11R, 13H) |
— |
177607 |
1 |
Engine, 14KCR (Recoil Start Only) |
*— |
047792 |
4 |
Capscrew, Hex Hd, M10 x 1.5 x 30 mm (8KM) |
— |
167996 |
1 |
Engine, 14KM |
*— |
167749 |
4 |
Capscrew, Hex Hd, M10 x 1.5 x 90 mm (9W) |
— |
139250 |
1 |
Engine, 16KM |
— |
020323 |
4 |
Capscrew, Hex Hd., 3/8-16UNC x 1” |
— |
139697 |
1 |
Engine, 16BV |
|
|
|
(Full Thread) (14KC, 14KCR) |
— |
167981 |
1 |
Engine, 18BV |
*–– |
173058 |
4 |
Capscrew,Hex Hd.,M8x1.25x45mm (16BV, 18BV) |
— |
177282 |
1 |
Engine, 18H (No Longer Available) |
|
|
|
|
— |
177461 |
1 |
Engine, 20H (See Note J) |
6 |
173014 |
4 |
Washer, Flat, M10 |
— |
190334 |
1 |
Engine, 20H, Modified (See Note J) |
|
|
|
(8KM, 9W, 10Y, 11R, 13H, 13.5R, 16KM, 20H) |
— |
190092 |
1 |
Engine, 20H (See Note J) |
— |
020743 |
4 |
Washer, Flat, 3/8" (14KC) |
1A |
020067 |
1 |
Key, 1/4" Sq. x 1-1/4" |
*— |
020742 |
4 |
Washer, Flat, 5/16" (16BV, 18BV) |
|
|
|
|
||||
— |
020078 |
1 |
Key, 1/4" Sq. x 3/4" (14KM, 16KM) |
*7 |
139748 |
4 |
Locknut, Fiber, M10 x 1.5 |
— |
177608 |
1 |
Key, Bevel, 1/4" Sq. x 2-5/8” (14KCR) |
|
|
|
(8KM, 9W, 10Y, 11R, 13H, 13.5R, 16KM, 18H, 20H) |
|
|
|
|
— |
020786 |
4 |
Lockwasher, Split, 3/8" (14KC, 14KCR) |
1B |
—------ |
1 |
Element, Air Cleaner (See Note “A”) |
*— |
020199 |
2 |
Locknut, Fiber, 3/8"-16 (14KM) |
— |
177528 |
1 |
Element, Air Cleaner (18H, 20H) |
*8 |
167133 |
1 |
Fitting, M12 x 10mm Barb (13H) |
|
|
|
|
||||
2 |
177014 |
1 |
Motor, Electric (51E) |
*— |
177065 |
1 |
Fitting Assy, M14 x 3/8” Barb (11R, 13.5R) |
— |
000923 |
1 |
Motor, Electric (53E) |
— |
020819 |
1 |
Fitting, 3/8" NPT x 3/8" Barb |
— |
167994 |
1 |
Motor, Electric (75E) |
|
|
|
(9W, 14KC, 14KCR, 16BV, 18BV) |
|
|
|
|
— |
177017 |
1 |
Fitting, 1/2" NPT x 3/8" Barb (8KM) |
3 |
167746 |
1 |
Pulley, 3G3V2.65, 1GRL-1.00 w/SS |
— |
177018 |
1 |
Fitting, 3/4" NPT x 3/8" Barb (14KM,16KM) |
|
|
|
(8KM, 10Y, 11R, 13H, 13.5R) |
–– |
–– |
1 |
Fitting, Oil Drain (18H, 20H ) |
— |
139298 |
1 |
Pulley, 3G3V3.15 - 1.125 w/SS (9W) |
|
|
|
(Honda # 15558-ZJ1-010AH) |
— |
139288 |
1 |
Pulley, 3G3V2.65-1.125-w/SS |
— |
177019 |
1 |
Fitting Assy, M16 x 1.5 x 3/8" Barb (10Y) |
|
|
|
(14KM, 14KC, 14KCR) |
|
|
|
|
— |
167942 |
1 |
Pulley, 4G3V2.65 - 1.125 w/SS |
*9 |
167305 |
1 |
Hose Assembly, Oil Drain (All except noted) |
|
|
|
(16KM, 20H) (See Note J) |
–– |
020967 |
1 |
Hose, Oil Drain (12") (18H, 20H Only) |
— |
167889 |
1 |
Pulley, 4G3V2.65-1.00 w/SS |
–– |
167304 |
1 |
Hose Assembly, Oil Drain (14KCR) |
|
|
|
(16BV, 18BV, 18H, 20H) (See Note J) |
|
|
|
|
— |
060139 |
1 |
Pulley, 2G3V2.65 - .875 w/SS (5E) |
10 |
020049 |
1 |
Hose Clamp |
— |
041134 |
1 |
Pulley, 3G3V2.80 - 1.375 w/SS (75E) |
*11 |
167307 |
1 |
Blanking Cap |
3A |
020550 |
2 |
Setscrew,Soc. Hd, 5/16-18 x 3/8" (5E, 7.5E) |
*12 |
167623 |
1 |
Tube Nut, M16 |
|
|
|
|
||||
— |
020540 |
2 |
Setscrew,Soc. Hd,1/4-20 x 1/4" (13-20 HP) |
|
|
|
|
— |
020541 |
2 |
Setscrew, Soc. Hd, 1/4-20 x 3/8" (9 W) |
|
|
|
|
4 |
161499 |
2 |
V-Belt, 3VX355 (51E, 53E) |
|
|
|
|
— |
163857 |
3 |
V-Belt, 3VX425 (75E) |
|
|
|
|
— |
163869 |
3 |
V-Belt, 3VX375 (10Y) |
|
|
|
|
— |
161499 |
3 |
V-Belt, 3VX355 (8KM, 11R, 13H, 13.5R, 14KC) |
|
|
|
|
— |
163857 |
3 |
V-Belt, 3VX425 (14KCR) |
|
|
|
|
— |
172281 |
3 |
V-Belt, 3VX400 (9W, 14KM) |
|
|
|
|
— |
163869 |
4 |
V-Belt, 3VX375 (16KM, 18H, 20H-See Note L) |
|
|
|
|
|
|
|
(For 20H, Before S/N 422140–See Note L) |
|
|
|
|
|
161499 |
2 |
V-Belt, 3VX355 (51E, 53E) |
|
|
|
|
— |
161499 |
4 |
V-Belt, 3VX355 (16BV, 18BV, 20H-See Note L) |
|
|
|
|
|
|
|
(Eff S/N 422140 for 20H–See Note L) |
|
|
|
|
See Notes on Page 15
11
FIGURE 2 – Engine & Blade Shaft Group / Grupo del Motor y Eje de la Hoja (Continued)
12
FIGURE 2- Parts List (Items 13 - 72)
|
|
|
|
|
|
|
(REV 2-12-2007) |
|
|
|
|
|
|
PART |
|
|
|
DIAG |
PART |
QTY |
|
DIAG |
QTY |
|
||
LOC. |
NO. |
REQ |
DESCRIPTION (* Denotes Metric Item) |
LOC. |
NO. |
REQ |
DESCRIPTION (* Denotes Metric Item) |
|
13 |
164238 |
1 |
Clamp (Used On 1994 Models Only) |
*42 |
167943 |
1 |
Blade Guard Assy – 14” (Complete) |
|
–– |
166673 |
1 |
Clamp, Insulated, 5/8” I.D. x 1/4" Hole (14kcr) |
*— |
195129 |
1 |
Blade Guard - Compl – 18” Husq Gray |
|
*14 |
139761 |
1 |
Capscrew, Hex Hd., M6 x 1.0 x 20mm |
*— |
195140 |
1 |
Blade Guard - Compl – 20” Husq Gray |
|
43 |
502447301 |
1 |
Blade Guard, Front – 18” Husq Gray |
|||||
–– |
163688 |
1 |
Capscrew, Hex Hd., M6 x 1.0 x 16mm (14kcr) |
43 |
502447701 |
1 |
Blade Guard, Front – 20” Husq Gray |
|
*15 |
139745 |
1 |
Locknut, Fiber, M6 x 1.0 |
— |
139076 |
1 |
Front Blade Guard Weldment – 14” |
|
*16 |
167478 |
1 |
Capscrew, Hex Hd., M8 x 1.25 x 25mm |
— |
139596 |
1 |
Front Blade Guard Weldment – 18” (Note H) |
|
— |
195120 |
1 |
Front Blade Guard Weldment – 18” (Note H) |
|||||
— |
139749 |
4 |
Capscrew, Hex Hd., M10 x 1.5 x 25mm (14KCR) |
— |
180846 |
1 |
Front Blade Guard Weldment – 20” (Note H) |
|
— |
195134 |
1 |
Front Blade Guard Weldment – 20” (Note H) |
|||||
17 |
020763 |
2 |
Washer, Flat, 5/16" SAE |
44 |
------ |
-- |
Rear Blade Guard - Not Available Use Item 42 |
|
— |
173014 |
4 |
Washer, Flat, M10 (14KCR) |
45 |
139075 |
1 |
Hinge (Note H) |
|
*18 |
139738 |
1 |
Locknut, Fiber, M8 x 1.25 |
|||||
45A |
195127 |
1 |
Hinge (Note H) |
|||||
— |
139748 |
4 |
Locknut, Fiber, M10 x 1.5 (14KCR) |
*46 |
139761 |
6 |
Capscrew, Hex Hd, M6 x 1.0 x 20mm (Note H) |
|
*19 |
139749 |
3 |
Capscrew, Hex Hd., M10 x 1.5 x 25mm |
*46A |
167478 |
6 |
Capscrew, Hex Hd M8 x 1.25x25mm (Note H) |
|
*20 |
173014 |
3 |
Washer, Flat, M10 |
47 |
020762 |
6 |
Washer, Flat, 1/4" SAE (Note H) |
|
*21 |
139748 |
3 |
Locknut, Fiber, M10 x 1.5 |
*47A |
173059 |
6 |
Washer, Flat, M8 (Note H) |
|
*22 |
139749 |
4 |
Capscrew, Hex Hd, M10 x 1.5 x 25mm (5E, 75E) |
*48 |
139745 |
6 |
Locknut, Fiber, M6 x 1.0 (Note H) |
|
*23 |
173014 |
4 |
Washer, Flat, M10 |
*48A |
139748 |
7 |
Locknut, Fiber, M8 x 1.25 (Note H) |
|
*24 |
139748 |
4 |
Locknut, Fiber, M10 x 1.5 |
49 |
040275 |
1 |
Fitting, 3/8" NPT Male x 3/4" Male |
|
25 |
167990 |
1 |
Motor Base (75E) |
50 |
139045 |
1 |
Manifold |
|
— |
177599 |
1 |
Engine Base (14KCR) |
51 |
139051 |
1 |
Gasket, Manifold |
|
26 |
167992 |
2 |
Spacer, Engine (9W, 14KM, 18H, 20H) |
|||||
*52 |
167551 |
4 |
Capscrew, Hex Hd, M6 x 1.0 x 40mm |
|||||
27 |
020365 |
2 |
Capscrew, Hex Hd., 3/8"-16 x 2-1/4" |
*53 |
139745 |
4 |
Locknut, Fiber, M6 x 1.0 |
|
28 |
020323 |
2 |
Capscrew, Hex Hd.,3/8-16 x 1"(Full Thread) |
54 |
167045 |
2 |
Water Tube -14" |
|
29 |
020377 |
2 |
Capscrew, Hex Hd., 3/8"-16 x 1-1/2" |
— |
167046 |
2 |
Water Tube -18" & 20" |
|
30 |
167894 |
1 |
Blade Shaft-Complete-3 Groove (5 – 14 HP) |
55 |
020864 |
2 |
Plug, 1/8" NPT |
|
— |
167893 |
1 |
Blade Shaft-Complete-4 Groove (16 – 20 HP) |
56 |
049212 |
2 |
Clamp, Water Tube |
|
31 |
167846 |
1 |
Nut, 5/8"-11UNC-LH Thread (Black Finish) |
*57 |
167818 |
4 |
Screw, Flat Hd., M6 x 1.0 x 16mm |
|
32 |
167962 |
1 |
Outer Collar w/ Drive Pin |
*58 |
139745 |
4 |
Locknut, Fiber, M6 x 1.0 |
|
32A |
167964 |
1 |
Drive Pin, 3/8" Dia x 1-1/8" Long |
59 |
040330 |
1 |
Spring |
|
33 |
167961 |
1 |
Blade Shaft w/ Inner Collars |
*60 |
167761 |
2 |
Capscrew, Hex Hd, M5 x 0.8 x 20mm |
|
33A |
167185 |
2 |
Inner Collar |
*61 |
172011 |
4 |
Nut, Standard Hex M5 x 0.8 |
|
34 |
020067 |
1 |
Key, 1/4" Sq. x 1-1/4" |
62 |
020782 |
2 |
Lockwasher, Split, #10 |
|
35 |
167895 |
2 |
Bearing w/Collar & SS (Eccentric Lock) |
*63 |
197227 |
1 |
Capscrew, Hex Hd M8 x 1.25 x 20mm |
|
36 |
020540 |
2 |
Setscrew, Socket Hd., 1/4"-20 x 1/4" |
*64 |
020785 |
1 |
Lockwasher, Split, M8 |
|
|
|
|
|
|||||
*37 |
139752 |
4 |
Capscrew, Hex Hd., M10 x 1.5 x 75mm |
*65 |
167749 |
1 |
Capscrew, Hex Hd, M10 x 1.5 x 90mm |
|
*38 |
173014 |
4 |
Washer, Flat, M10 |
*66 |
162004 |
1 |
Lockwasher, Split, M10 |
|
*39 |
139748 |
4 |
Locknut, Fiber, M10 x 1.5 |
*67 |
173014 |
1 |
Washer, Flat, M10 |
|
|
|
|
|
68 |
139255 |
1 |
Battery, 12V, 230 CCA – WET |
|
40 |
139300 |
1 |
Pulley, 3G3V3.65-1" w/SS (5 - 14HP ) |
-- |
139255A |
1 |
Battery, 12V, 230 CCA - DRY (Opt.) |
|
— |
167896 |
1 |
Pulley, 4GR3V3.65-1" w/SS (16 - 20 HP) |
|
|
|
|
|
40A |
020541 |
2 |
Setscrew, Soc. Hd., 1/4"-20x3/8" (For 139300) |
*69 |
167786 |
1 |
Battery Box Weldment |
|
— |
020541 |
4 |
Setscrew, Soc. Hd., 1/4"-20x3/8" (For 167896) |
70 |
167036 |
1 |
Strap, Battery Mount (Includes Item70A) |
|
|
|
|
Nut, 5/8"-11UNC-RH Thread (Gray Finish) |
70A |
163248 |
1 |
Strip, Sponge Rubber (15 inches) |
|
41 |
167847 |
1 |
*71 |
197227 |
2 |
Capscrew, Hex Hd, M8 x 1.25 x 20mm |
||
|
|
|
|
72 |
020785 |
2 |
Lockwasher, Split, 5/16” |
See Notes on Page 15
13
FIGURE 2 – Engine & Blade Shaft Group / Grupo del Motor y Eje de la Hoja (Continued)
14
FIGURE 2- Parts List (Items 73 - 105)
|
|
|
|
|
|
|
(REV 2-12-2007)) |
|
|
|
|
|
|
|
PART |
|
|
|
|
DIAG |
PART |
QTY |
|
DIAG |
QTY |
|
|
||
LOC. |
NO. |
REQ |
DESCRIPTION (* Denotes Metric Item) |
LOC. |
NO. |
REQ |
DESCRIPTION (* Denotes Metric Item) |
||
73 |
020763 |
2 |
Washer, Flat, 5/16” SAE |
88 |
167959 |
1 |
Weight Kit (26 lbs.) (Optional) |
||
*74 |
197227 |
2 |
Capscrew, Hex Hd., M8 x 1.25 x 20mm |
89 |
180418 |
4 |
Weight Bar-1/2" Thick (6-1/2 lbs. Each) |
||
75 |
020763 |
2 |
Washer, Flat, 5/16" SAE |
— |
— |
2 |
Weight Bar-1" Thick (13 lbs. Each) |
||
*76 |
139738 |
2 |
Locknut, Fiber, M8 x 1.25 |
— |
— |
— |
(1" Not Available Use 2 Of P/N 180418) |
||
*77 |
197227 |
1 |
Capscrew, Hex Hd., M8 x 1.25 x 20mm |
90 |
020329 |
2 |
Capscrew, Hex Hd., 3/8"-16 x 2-3/4" |
||
78 |
020785 |
1 |
Lockwasher, Split, 5/16" |
91 |
020199 |
2 |
Locknut, Fiber, 3/8"-16 |
||
92 |
167963 |
1 |
Outer Collar Assy-1/2"Cut (Optional) |
||||||
79 |
020763 |
1 |
Washer, Flat, 5/16" SAE |
||||||
80 |
177063 |
1 |
Battery Cable (+) (RED) |
93 |
167865 |
1 |
Outer Collar, 4.50 OD x 1/2" Cut |
||
–– |
542190395 |
1 |
Battery Cable (+) (RED)(14KC,18H,20H) |
94 |
020304 |
1 |
Drive Pin, 3/8" x 1-1/2" |
||
*81 |
167891 |
1 |
Battery Cable, (-) (BLACK) |
95 |
167189 |
1 |
Tiedown Bracket Kit (Optional) |
||
*82 |
163688 |
2 |
Capscrew, Hex Hd., M6 x 1.0 x 16mm |
96 |
167125 |
2 |
Eyenut, Saw Tiedown, 3/8"-16UNC |
||
*83 |
139745 |
2 |
Locknut, Fiber, M6 x 1.0 |
97 |
020323 |
2 |
Capscrew, Hex Hd., 3/8"-16 x 1" |
||
84 |
167735 |
1 |
Ignition Switch w/ Key (16KM) |
98 |
020786 |
2 |
Lockwasher, Split, 3/8" |
||
|
|
|
|
|
|||||
–– |
163830 |
1 |
Ignition Switch w/Key (18H, 20H ) (Notes C & F) |
99 |
167985 |
1 |
Fitting, 45 Deg Street, 3/8" NPT (9W) |
||
–– |
177920 |
1 |
Ignition Switch w/Key (18H, 20H ) (Notes D & F) |
100 |
139098 |
1 |
Flap, Splash |
||
|
|
|
|
*101 |
167761 |
2 |
Capscrew, Hex Hd., M5 x 0.8 x 20mm |
||
85 |
139272 |
1 |
Wiring Harness (16KM) |
*102 |
173047 |
2 |
Washer, Flat, M5 |
||
–– |
177283 |
1 |
Wiring Harness (18H, 20H) (See Notes C & G) |
*103 |
172316 |
2 |
Locknut, Fiber, M5 x 0.8 |
||
–– |
177913 |
1 |
Wiring Harness (18H, 20H) (See Note D & G) |
|
|
|
|
|
|
–– |
542190390 |
1 |
Wiring Harness-20H (See Note K) |
104 |
177066 |
2 |
Boot, Rubber – Battery |
||
86 |
139156 |
1 |
Stop Switch Assembly (8KM) |
105 |
177068 |
2 |
Boot, Rubber – Cable (14KC Only) |
||
— |
139196 |
1 |
Stop Switch Assembly (9W) |
— |
177066 |
1 |
Boot, Rubber – Cable (18H, 20H) |
||
— |
177021 |
1 |
Stop Switch Assembly (11R, 13H) |
|
|
|
Items Not Shown On Figure 2: |
||
— |
196019 |
1 |
Stop Switch Assembly (13.5R) |
|
|
|
|||
— |
177022 |
1 |
Stop Switch Assembly (14KC) |
— |
167104 |
1 |
Guard, Muffler (Optional: 14KM, 16KM) |
||
— |
177612 |
1 |
Stop Switch Assembly (14KCR) |
-- |
------ |
1 |
Regulator (18H, 20H) (Honda P/N 31620-ZG5-003) |
||
— |
177023 |
1 |
Stop Switch Assembly (14KM) |
||||||
— |
167727 |
1 |
Stop Switch Assembly (16BV, 18BV) |
-- |
166890 |
2 |
Capscrew, Hex Hd, M6 x 1.0 x 30mm ** |
||
|
|
|
|
-- |
020762 |
2 |
Washer, Flat, ¼” SAE** |
||
87 |
041317 |
1 |
Switch, Push-Button |
-- |
139745 |
2 |
Locknut, Fiber, M6 x 1.0 ** |
||
|
|
|
|
|
|
|
** Use To Attach Regulator (18H, 20H) |
Figure 2 Notes:
A)See Engine Distributor For Item 1B (Element) For The Following Models: 8KM, 9W, 10Y, 11R, 13H, 13.5R, 14KM, 14KCR, 14KC, 16KM, 16BV, 18BV.
C)These Items (Marked with a C) Effective from First Unit Production (S/N 167250) To Approx. February, 2000).
D)These Items (Marked with a D) Effective Spring (Approx. February, 2000).
F)Ignition Switch P/N 163830 must be used with P/N 177283 Wiring Harness. Ignition Switch P/N 177920 must be used with P/N 177913 Wiring Harness. When both items are serviced together it is suggested that the 177920 / 177913 part combination be used because the push-on wire connectors are easier to assemble.
G)Wiring Harness P/N 177913 can be identified by the RED stripe near the “engine end” of the harness. P/N 177283 does not have a colored stripe.
H)For Item 45A, P/N 195127 Hinge (1/4” Thick) use P/N 195120 Front Guard Weldment, 18” or P/N 195134 Front Guard Weldment, 20” and M8 attaching hardware (Items 46A, 47A & 48A). For Item 45, P/N 139075 Hinge (1/8” Thick) use P/N 139228 Front Guard Weldment, 18” or P/N 174672 Front Guard Weldment, 20” and M6 attaching hardware (Items 46, 47 & 48).
J)Engine model changed for saws mfg. After 15November2002. P/N 177461 Engine has a 1.00” dia. Crankshaft and requires P/N 167889 pulley (1.00” I.D.). Effective about 15November2002 with saw serial number 383022; units mfg. using P/N 190334 Engine and requires P/N 167942 pulley (1.125” I.D.). P/N’s 177461 & 190334 Engines (w/ Engine Mounted Fuel Tanks) Not Available as of April 2003. P/N 190092 Engine & Fuel Tank Group (See Figure 4) is the only replacement for a complete older style engine.
K)Wiring Harness P/N 542190390 can be identified by a BLUE stripe at one end, & is used only with Engine P/N 190092.
L)PAC IV-20H Eff. S/N 422140 (Built about 10/11/2004): Eliminated P/N 167992 Spacer. Belt Changed to 161499 (3VX355).
15