HP PSC 1300 Setup Poster [he]
1342
*Q3500-90196*
*Q3500-90196*
Windows 98,
2000, ME, XP
Q3500-90196
567
12
9
810
hp psc 1300 series all-in-one
11
h
p
p
s
c
1
1
p
0
r
i
n
t
0
e
r
s
c
a
n
n
e
r
c
o
p
i
e
r
www.hp.com/support Copyright Hewlett-Packard Company 2003
Macintosh users
1 43
START HERE
Macintosh OS 9, OS X
2
Unpack the device
Macintosh
Attach the front panel cover
a
Remove the adhesive backing from the front panel cover.
Raise the lid of the HP PSC. Place the front panel cover into the recess and
b
stick it into place.
The HP PSC will not work until you attach the front panel cover!
a
b
a
Load plain white paper
b
Q3500-90196
This side of the poster is for
*Q3500-90196*
*Q3500-90196*
Macintosh users only.
Follow the steps on this poster in
order.
Insert and align the print cartridges
8
Connect the USB cable
5
If you have an iMac, the USB port is on the side.
Do not connect the HP PSC to a USB port on a
keyboard or a non-powered USB hub. See the
Reference Guide for more details.
6
Connect the power cords
a
b
Turn on the HP PSC
7
c
Press the On/Resume
button to turn on the
HP PSC. Wait for it to
finish initializing.
a
Lower the print-carriage
access door. The print
carriage slides to the
middle.
b
Remove the bright pink tape from
the print cartridges. Do not touch
the gold-colored contacts or retape
the cartridges.
c
Hold the black print cartridge with the large HP label and the raised
markings on top. Slide the cartridge at a slight angle into the right
side of the print carriage.
Press firmly until the print cartridge snaps into place.
Tri-color Black
d
Hold the color print cartridge with the large HP label and the raised
markings on top. Slide the cartridge at a slight angle into the left side of
the print carriage.
Press firmly until the print cartridge snaps into place.
Make sure that both print cartridges are secure.
h
p
p
s
c
1
p
1
r
i
0
n
t
e
r
0
s
a
c
n
e
n
r
c
p
o
i
e
r
e
Close the print-carriage access door. Within a few minutes, a print
cartridge alignment page prints.
Place the top of the alignment page face down on the front left corner
of the glass. Close the lid.
f
Press the Scan button.
After the On light stops blinking,
alignment is complete. Discard or
recycle the alignment page.
Install the software
9
a
Macintosh setup poster
hp psc 1300 series all-in-one
Macintosh OS 9, OS X
Turn on your Macintosh and wait
for it to finish starting up.
Insert the Macintosh HP PSC CD.
b
Double-click the
HP All-In-One
Installer icon on
the desktop.
hp_all-in-one_installer
Try the HP PSC
10
c
Follow the onscreen instructions.
You may have to restart your
Macintosh during setup. Be sure to
complete the setup assistant.
Congratulations! You are now ready to use your HP
PSC. Select the HP Director icon in the dock to get
started.
If you encounter problems during setup, see the
Reference Guide.
www.hp.com/support
Copyright Hewlett-Packard Company 2003
Printed in Germany
Loading...