LASERJET PRO 200 COLOR MFP
Quick Reference Guide
M276
Optimize copy quality
The following copy-quality settings are available:
Auto Select: Use this setting when you are not concerned about the quality of the copy. This is the
●
default setting.
Mixed: Use this setting for documents that contain a mixture of text and graphics.
●
Text: Use this setting for documents that contain mostly text.
●
Picture: Use this setting for documents that contain mostly graphics.
●
1. Load the document onto the scanner glass
or into the document feeder.
2. From the Home screen, touch the Copy
button.
3. Touch the Settings button, and then scroll to
and touch the Optimize button. Touch the
arrow buttons to scroll through the options,
and then touch an option to select it.
4. Touch the Black or Color button to start
copying.
2Quick Reference Guide ENWW
Scan by using the HP Scan software (Windows)
1. Double-click the HP Scan icon on the computer desktop.
2. Select a scanning shortcut, and adjust the settings if necessary.
3. Click Scan.
NOTE: Click Advanced Settings to gain access to more options.
Click Create New Shortcut to create a customized set of settings and save it in the list of shortcuts.
ENWW
Scan by using the HP Scan software (Windows)
3
Replace the toner cartridges
1. Open the front door.
2. Pull out the toner cartridge drawer.
3. Grasp the handle on the toner cartridge,
and then pull the toner cartridge straight up
to remove it.
4Quick Reference Guide ENWW
4. Remove the new toner cartridge from the
packaging.
5. Gently rock the toner cartridge from front to
back to distribute the toner evenly inside the
cartridge.
6. Remove the plastic shield from the bottom of
the new toner cartridge.
ENWW
Replace the toner cartridges
5
7. Do not touch the imaging drum on the
bottom of the toner cartridge. Fingerprints
on the imaging drum can cause print-quality
problems.
8. Insert the new toner cartridge into the
product.
9. Pull the tab on the left side of the toner
cartridge straight up to completely remove
the sealing tape. Discard the sealing tape.
6Quick Reference Guide ENWW
10. Close the toner cartridge drawer.
11. Close the front door.
12. Place the old toner cartridge and the plastic
shield in the box for the new toner
cartridge. Follow the recycling instructions
that are included in the box.
ENWW
Replace the toner cartridges
7
Check the scanner glass for dirt and smudges
Over time, specks of debris might collect on the scanner glass and white plastic backing, which can affect
performance. Use the following procedure to clean the scanner glass and white plastic backing.
1. Use the power switch to turn off the product,
and then unplug the power cord from the
electrical socket.
2. Open the scanner lid.
3. Clean the scanner glass and the white
plastic backing with a soft cloth or sponge
that has been moistened with nonabrasive
glass cleaner.
CAUTION: Do not use abrasives,
acetone, benzene, ammonia, ethyl alcohol,
or carbon tetrachloride on any part of the
product; these can damage the product. Do
not place liquids directly on the glass or
platen. They might seep and damage the
product.
4. Dry the glass and white plastic with a
chamois or a cellulose sponge to prevent
spotting.
5. Plug in the product, and then use the power
switch to turn on the product.
8Quick Reference Guide ENWW
Change color options (Windows)
1. From the software program, select the Print
option.
2. Select the product, and then click the
Properties or Preferences button.
3. Click the Color tab.
4. Click the Automatic or Manual setting.
Automatic setting: Select this setting
●
for most color print jobs.
Manual setting: Select this setting to
●
adjust the color settings independent
from other settings.
NOTE: Changing color settings
manually can impact output. HP
recommends that only color graphics
experts change these settings.
5. Click the Print in Grayscale option to
print a color document in black and shades
of gray. Use this option to print color
documents for photocopying or faxing. You
can also use this option to print draft copies
or to save color toner.
6. Click the OK button.
ENWW
Change color options (Windows)
9
Print a cleaning page
1.
From the Home screen, touch the Setup
2. Touch the Service menu.
3. Touch the Cleaning Page button.
4. Load plain letter or A4 paper when you are prompted.
5. Touch the OK button to begin the cleaning process.
The product prints the first side and then prompts you to remove the page from the output bin and
reload it in Tray 1, keeping the same orientation. Wait until the process is complete. Discard the
page that prints.
button.
10 Quick Reference Guide ENWW
Print on both sides (duplex) with Windows
1. On the File menu in the software program,
click Print.
2. Select the product, and then click the
Properties or Preferences button.
3. Click the Finishing tab.
ENWW
Print on both sides (duplex) with Windows
11
4. Select the Print on both sides
(manually) check box. Click the OK
button to print the first side of the job.
5. Retrieve the printed stack from the output
bin, and maintaining the same orientation,
place it with the printed-side facing down in
the input tray.
6. On the control panel, press the OK button
to print the second side of the job.
12 Quick Reference Guide ENWW
iv ENWW
© 2012 Hewlett-Packard Development Company, L.P.
www.hp.com
Edition 1, 4/2012
Part number: CF144-90966
Windows ® is a U.S. registered trademark of Microsoft Corporation.
Reproduction, adaptation or translation without prior written permission is
prohibited, except as allowed under the copyright laws.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable
for technical or editorial errors or omissions contained herein.
*CF144-90966*
*CF144-90966*
CF144-90966
Loading...