Honeywell MS4104F1210, MS4109F1010, MS4109F1210, MS4604F1010, MS4609F1010 User Manual
...
MS4104, MS4109, MS4604, MS4609, MS8104,
MS8109 Fast-Acting, Two-Position Actuators
FOR FIRE/SMOKE CONTROL APPLICATIONS
PRODUCT DATA
FEATURES
• 30 lb-in. (3.4 N•m) or 80 lb-in. (5.9 N•m) minimum
driving torque at 350°F (176°C).
• Reversible mounting facilitates use in either clockwise
(cw) or counterclockwise (ccw) spring rotation.
• Integral spring return ensures level of return torque.
• Fifteen-second spring return timing.
• No special cycling required during long-term holding.
(See Operation section.)
• No audible noise during holding.
• Patent pending design eliminates need for limit
switches to reduce power consumption.
• Models available for 24, 120, and 230 Vac.
• Ninety-five degree angle of rotation.
• Actuator holds rated torque at reduced power level.
• Die-cast aluminum housing.
• Housing design allows flush mounting to damper.
APPLICATION
The MS4104, MS4109, MS4604, MS4609, MS8104 and
MS8109 Fast-Acting, Two-Position Actuators are spring return
direct coupled actuators (DCA) for Fire and Smoke dampers
(on/off control). The actuator accepts an on/off signal from a
single-pole, single-throw (SPST) controller. Reversible
mounting allows actuator to be used for either clockwise (cw)
or counterclockwise (ccw) spring rotation.
• Designed to operate reliably in smoke control systems
requiring Underwriter’s Laboratories Inc. UL555S
ratings up to 350°F.
• Models available with SPST position-indicating
switches (7°, 85° stroke).
Contents
Application ........................................................................ 1
Features ........................................................................... 1
Specifications ................................................................... 2
Ordering Information ........................................................ 2
Installation ........................................................................ 4
Operation .......................................................................... 6
Checkout .......................................................................... 6
63-2740-02
MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 FAST-ACTING, TWO-POSITION ACTUATORS
SPECIFICATIONS
Models: See Table 1.
Table 1. Models.
Model
(Vac)
MS4104F1010 120 None
MS4104F1210 120
MS4109F1010 120 None
MS4109F1210 120
MS4604F1010 230 None
MS4604F1210 230
MS4609F1010 230 None
MS4609F1210 230
MS8104F1010 24 None
MS8104F1210 24
MS8109F1010 24 None
MS8109F1210 24
Voltag e
a
Internal switches are designed to pass UL555S
requirements (at 350°F).
Dimensions: See Fig. 1.
Minimum Damper Shaft Length: 2 in. (51 mm).
Device Weight: 5 lb (2.3 kg).
Stroke: 95° ± 3°, mechanically limited.
Electrical Ratings: See Table 2.
Electrical Connections:
Power Lead Wires:
MS410xF and MS460xF: 32 inches (0.8m), 18 AWG
MS810xF: 39 inches (1m), 18 AWG
Switch Lead Wires: 18 inches, 18 AWG, 2 color coded leads
Mounting: Round 1/2 inch shaft adapter with 1/4 inch set
screws.
Internal Auxiliary
Switches
2 SPST
2 SPST
2 SPST
2 SPST
2 SPST
2 SPST
a
a
a
a
a
a
IMPORTANT
Honeywell does not recommend using linkages with
these actuators because side-loading of the output
hub reduces actuator life.
Temperature Ratings:
Ambient: 0°F to 130°F (-18°C to 55°C).
Shipping and Storage: -40°F to 140°F (-40°C to 60°C).
IMPORTANT
The actuator is designed to meet UL555S standards
at 350°F (176°C). The actuator must be tested with
the damper to achieve this rating.
Humidity Ratings: 5% to 95% RH noncondensing.
Noise Rating (Maximum):
Driving Open: 80 dBA at 1m.
Holding: 20 dBA at 1m (no audible noise).
Controller Type:
MS4104, MS4109: Line voltage (120 Vac),
two-position, SPST (Series 40).
MS4604, MS4609: Line voltage (230 Vac),
two-position, SPST (Series 40).
MS8104, MS8109: Low voltage (24 Vac),
two-position, SPST (Series 80).
Table 2. MS4104, MS4109, MS4604, MS4609, MS8104 and
MS8109 DCA Models.
Model
Power Consumption Torque
in lb-in.
(N•m)
Voltage
Input
in VacRunning Holding
MS4104F 0.18A, 18W 0.11A, 9W 30 (3.4) 120 ±10%,
MS4109F 0.25A, 23W 0.13A, 7W 80 (9)
50/60 Hz
MS4604F 0.13A, 18W 0.10A, 11W 30 (3.4) 230 ±10%,
MS4609F 0.13A, 23W 0.09A, 7W 80 (9)
50/60 Hz
MS8104F 16 VA 8 VA 30 (3.4) 24Vac/dc +20%,
MS8109F 23 VA 7 VA 80 (9)
-10%, 50/60 Hz
Torque Rating (at rated voltage):
Spring Return:
MS4104F, MS4604F, MS8104F: 30 lb-in. (3.4 N•m).
MS4109F, MS4609F, MS8109: 80 lb-in. (9 N•m).
Stall Maximum:
MS4104F, MS4604F, MS8104F: 150 lb-in. (17 N•m).
MS4109F, MS4609F, MS8109: 240 lb-in. (27 N•m).
350°F Driving:
MS4104F, MS4604F, MS8104F: 30 lb-in. (3.4 N•m).
MS4109F, MS4609F, MS8109: 80 lb-in. (9 N•m).
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number. If you have additional questions, need further information,
or would like to comment on our products or services, please write or phone:
1. Your local Honeywell Environmental and Combustion Controls Sales Office (check white pages of your phone directory).
2. Honeywell Customer Care
1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
3. http://customer.honeywell.com or http://customer.honeywell.ca
International Sales and Service Offices in all principal cities of the world. Manufacturing in Belgium, Canada, China, Czech
Republic, Germany, Hungary, Italy, Mexico, Netherlands, United Kingdom, and United States.
63-2740—02 2
MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 FAST-ACTING, TWO-POSITION ACTUATORS
M34622
2 (51)
1 (25)
90
°
0
°
11/16
(17)
6-3/8
(161)
8-15/16
(227)
4 (102)
2 (51)
1/16
(2)
3-1/4 (83)
5-1/8 (130)
9/16 (14)
Timing (At Rated Torque and Voltage):
Drive Open: 15 seconds typical.
Spring Close: 15 seconds typical.
Cycling Requirements:
Prolonged holding-period (1 year) testing of these actuators
has been performed with no spring return failures. The actuator and the internal spring are designed to require no special cycling during long-term holding.
Honeywell recommends following all local, state and national
codes for periodic testing of the entire smoke control system. Refer to National Fire Protection Association (NFPA)
National Fire Codes®: NFPA90A, NFPA92A and NFPA92B
for your application.
NFPA recommends periodic examination of each fire/smoke
damper (semi-annually or annually) to ensure proper performance.
Design Life (at Rated Voltage): 30,000 full stroke cycles.
Approvals: See Table 3.
Environmental Protection Ratings: See Table 4.
Accessories:
205649 Mounting Bracket (not supplied with actuator).
Table 3. Approvals.
MS4104F, MS4109F,
MS4604F, MS4609F
MS8104F,
MS8109F
UL/cUL X X
UL873 X X
CE X X
C-Tick X X
Table 4. Environmental Ratings.
MS4104, MS4109, MS4604,
All Devices
NEMA1 IP40
MS4609, MS8104 and
MS8109
Fig. 1. MS4104, MS4109, MS4604, MS4609, MS8104 and
MS8109 dimensional drawing in in. (mm).
3 63-2740—02
Loading...