MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 Fast-Acting, Two-Position Actuators
FOR FIRE/SMOKE CONTROL APPLICATIONS
PRODUCT DATA
The MS4104, MS4109, MS4604, MS4609, MS8104 and MS8109 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation.
•30 lb-in. (3.4 N•m) or 80 lb-in. (9 N•m) minimum driving torque at 350°F (176°C).
•Reversible mounting facilitates use in either clockwise (cw) or counterclockwise (ccw) spring rotation.
•Integral spring return ensures level of return torque.
•Fifteen-second spring return timing.
•No special cycling required during long-term holding. (See Operation section.)
•No audible noise during holding.
•Patent pending design eliminates need for limit switches to reduce power consumption.
•Models available for 24, 120, and 230 Vac.
•Ninety-five degree angle of rotation.
•Actuator holds rated torque at reduced power level.
•Die-cast aluminum housing.
•Housing design allows flush mounting to damper.
•Designed to operate reliably in smoke control systems requiring Underwriter’s Laboratories Inc. UL555S ratings up to 350°F.
•Models available with SPST position-indicating switches (7°, 85° stroke).
|
Contents |
Application ........................................................................ |
1 |
Features ........................................................................... |
1 |
Specifications ................................................................... |
2 |
Ordering Information ........................................................ |
2 |
Installation ........................................................................ |
4 |
Operation .......................................................................... |
6 |
Checkout .......................................................................... |
6 |
|
N314 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
63-2740-05 |
MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 FAST-ACTING, TWO-POSITION ACTUATORS
Models: See Table 1.
Table 1. Models.
|
Voltage |
Internal Auxiliary |
Model |
(Vac) |
Switches |
|
|
|
MS4104F1010 |
120 |
None |
|
|
|
MS4104F1210 |
120 |
2 SPSTa |
MS4109F1010 |
120 |
None |
|
|
|
MS4109F1210 |
120 |
2 SPSTa |
MS4604F1010 |
230 |
None |
|
|
|
MS4604F1210 |
230 |
2 SPSTa |
MS4609F1010 |
230 |
None |
|
|
|
MS4609F1210 |
230 |
2 SPSTa |
MS8104F1010 |
24 |
None |
|
|
|
MS8104F1210 |
24 |
2 SPSTa |
MS8109F1010 |
24 |
None |
|
|
|
MS8109F1210 |
24 |
2 SPSTa |
aInternal switches are designed to pass UL555S requirements (at 350°F for 30 minutes) and are intended for use as position indication.
Dimensions: See Fig. 1.
Minimum Damper Shaft Length: 2 in. (51 mm).
Device Weight: 5 lb (2.3 kg).
Stroke: 95° ± 3°, mechanically limited.
Electrical Ratings: See Table 2.
Electrical Connections:
Power Lead Wires:
MS410xF and MS460xF: 32 inches (0.8m), 18 AWG
MS810xF: 39 inches (1m), 18 AWG
Switch Lead Wires: 18 inches, 18 AWG, 2 color coded leads
Mounting: Round 1/2 inch shaft adapter with 1/4 inch set screws.
Threads: ¼-20 UNC-2A
Material: Alloy Steel hardened to HRC 45-53 Thread Lock: Nylon Patch
IMPORTANT
Honeywell does not recommend using linkages with these actuators because side-loading of the output hub reduces actuator life.
Temperature Ratings:
Ambient: 0°F to 130°F (-18°C to 55°C).
Shipping and Storage: -40°F to 140°F (-40°C to 60°C).
IMPORTANT
The actuator is designed to meet UL555S standards at 350°F (176°C). The actuator must be tested with the damper to achieve this rating.
Humidity Ratings: 5% to 95% RH noncondensing.
Noise Rating (Maximum):
Driving Open: 75 dBA at 1m.
Holding: 20 dBA at 1m (no audible noise).
Controller Type:
MS4104, MS4109: Line voltage (120 Vac), two-position, SPST (Series 40).
MS4604, MS4609: Line voltage (230 Vac), two-position, SPST (Series 40).
MS8104, MS8109: Low voltage (24 Vac), two-position, SPST (Series 80).
Table 2. MS4104, MS4109, MS4604, MS4609, MS8104 and
MS8109 DCA Models.
|
Power Consumption |
Torque |
Voltage |
|||
|
|
|
in lb-in. |
Input |
||
|
|
|
||||
Model |
Running |
Holding |
(N•m) |
in Vac |
||
|
|
|
|
|
|
|
MS4104F |
0.18A, 18W |
0.11A, 9W |
30 |
(3.4) |
120 ±10%, |
|
|
|
|
|
|
50/60 Hz |
|
MS4109F |
0.25A, 23W |
0.13A, 7W |
80 |
(9) |
||
|
||||||
|
|
|
|
|
|
|
MS4604F |
0.13A, 18W |
0.10A, 11W |
30 |
(3.4) |
230 ±10%, |
|
|
|
|
|
|
50/60 Hz |
|
MS4609F |
0.13A, 23W |
0.09A, 7W |
80 |
(9) |
||
|
||||||
|
|
|
|
|
|
|
MS8104F |
16 VA |
8 VA |
30 |
(3.4) |
24Vac/dc +20%, |
|
|
|
|
|
|
-10%, 50/60 Hz |
|
MS8109F |
23 VA |
7 VA |
80 |
(9) |
||
|
||||||
|
|
|
|
|
|
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the TRADELINE® Catalog or price sheets for complete ordering number. If you have additional questions, need further information, or would like to comment on our products or services, please write or phone:
1.Your local Honeywell Environmental and Combustion Controls Sales Office (check white pages of your phone directory).
2.Honeywell Customer Care 1985 Douglas Drive North
Minneapolis, Minnesota 55422-4386
3.http://customer.honeywell.com or http://customer.honeywell.ca
International Sales and Service Offices in all principal cities of the world. Manufacturing in Belgium, Canada, China, Czech Republic, Germany, Hungary, Italy, Mexico, Netherlands, United Kingdom, and United States.
63-2740—05 |
2 |
MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 FAST-ACTING, TWO-POSITION ACTUATORS
Torque Rating (at rated voltage):
Spring Return:
MS4104F, MS4604F, MS8104F: 30 lb-in. (3.4 N•m). MS4109F, MS4609F, MS8109: 80 lb-in. (9 N•m).
Stall Maximum:
MS4104F, MS4604F, MS8104F: 150 lb-in. (17 N•m). MS4109F, MS4609F, MS8109: 240 lb-in. (27 N•m).
350°F Driving:
MS4104F, MS4604F, MS8104F: 30 lb-in. (3.4 N•m). MS4109F, MS4609F, MS8109: 80 lb-in. (9 N•m).
Timing (At Rated Torque and Voltage):
Drive Open: 15 seconds typical.
Spring Close: 15 seconds typical.
Cycling Requirements:
The actuator and the internal spring are designed to require no special cycling during long-term holding.
Honeywell recommends following all local, state and national codes for periodic testing of the entire smoke control system. Refer to National Fire Protection Association (NFPA) National Fire Codes®: NFPA90A, NFPA92A and NFPA92B for your application.
NFPA recommends periodic examination of each fire/smoke damper (semi-annually or annually) to ensure proper performance.
Design Life (at Rated Voltage): 30,000 full stroke cycles.
Approvals: See Table 3.
Environmental Protection Ratings: See Table 4.
Accessories:
205649 Mounting Bracket (not supplied with actuator).
Table 3. Approvals.
|
MS4104F, |
MS4604F, |
MS8104F, |
|
MS4109F |
MS4609F |
MS8109F |
|
|
|
|
UL/cUL |
X |
X |
X |
|
|
|
|
UL60730 |
X |
X |
X |
|
|
|
|
CE |
X |
X |
X |
|
|
|
|
C-Tick |
X |
X |
X |
|
|
|
|
Table 4. Environmental Ratings.
|
2 (51) |
|
|
1 (25) |
|
|
|
11/16 |
90° |
0° |
(17) |
|
||
|
|
6-3/8 |
|
|
(161) |
|
8-15/16 |
|
|
(227) |
|
2 (51) |
3-1/4 (83) |
1/16 |
4 (102) |
|
(2) |
|
9/16 (14) |
|
|
|
|
|
|
|
5-1/8 (130) |
|
|
|
|
|
|
|
|
M34622 |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig. 1. MS4104, MS4109, MS4604, MS4609, MS8104 and MS8109 dimensional drawing in in. (mm).
|
MS4104, MS4109, MS4604, |
|
MS4609, MS8104 and |
All Devices |
MS8109 |
|
|
NEMA1 |
IP40 |
|
|
3 |
63-2740—05 |