Honeywell MS4209F, MS4309F, MS4709F, MS4809F, MS8209F Catalog Page

...

Direct Coupled Damper Actuators—Fire and Smoke

MS4209F; MS4309F; MS4709F; MS4809F; MS8209F; MS8309F Fast-Acting, Two-Position Actuators, 80 lb-in

The MS8309F is a 80 lb-in (9Nm), spring return direct-coupled, 24 Vac, CCW actuator that accepts two position (SPST) control with an integral junction box. The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. They are designed to operate reliably in smoke control systems requiring Underwriter's Laboratories Inc. UL555S ratings up to 350 F.

• Integral spring return ensures level of return torque

• Fifteen-second spring return timing

• No special cycling required during long-term holding

• No audible noise during holding

• Patent pending design eliminates need for limit switches to reduce power consumption

• Models available for 24, 120, and 230 Vac

• Ninety-five degree angle of rotation for tight damper closure

• Actuator holds rated torque at reduced power level

• Die-cast aluminum housing

• Housing design allows flush mounting to damper

• Integral junction box with three conduit openings eliminates need for separate wiring box

Actuator Type: Damper Rotational Stroke: 95 ±3 degrees Fail Safe Mode: Spring Return Torque Rating: 80 lb-in. (9 Nm) Minimum Driving Torque at 350 F: 80 lb-in. Spring Return Torque: 80 lb-in. (9 Nm) Dimensions, Approximate: 7.5 in high x 5.13 in wide x 3.32 in deep

(192 mm high x 129 mm wide x 84 mm deep)

External Auxiliary Switches Available: Yes, 32003532-005 Number of Internal Auxiliary Switch: 0 Environmental Rating: NEMA1 Frequency: 60 Hz Mounting: Direct Coupled Maximum Noise Rating, Holding (dBA @ 1m): 20 (no aud ble noise) Maximum Noise Rating, Driving (dBA @ 1m): 80

Timing (seconds)

Maximum Spring Return (sec) Driving Holding (inch) (m)

Product Number

MS4209F1007/U Two position;

MS4309F1005/U Two position;

MS4709F1014/U Two position;

MS4809F1012/U Two position;

MS8209F1003/U Two position;

MS8309F1001/U Two position;

Control Signal

SPST

Maximum Driving @ 60 Hz

25 sec 15 sec 15 sec 0.25A,

25 sec 15 sec 15 sec 0.13A,

25 sec 15 sec 15 sec 23 VA 7 VA 24 Vac

Nominal Driving @ 60 Hz

Compatible Damper Shafts: 3/8 to 1/2 in. square or round

(10 to 13 mm square/round)

Shaft Adapter Type: Aluminum Hub, four set screws Materials: Aluminum housing Operating Humidity Range (% RH): 5 to 95% RH, non-condensing Ambient Temperature Range: 0 F to +130 F (-18 C to +55 C) Storage Temperature Range: -40 F to 140 F (-40 C to +60 C) Weight: 6 lb (2.72 kg) Comments: Integral junction box with three 7/8 in. conduit openings

(fittings not included)

Approvals CE: 89/336/ECC, 73/23/EEC C-Tick: N314 Underwriters Laboratories, Inc: UL873, Plenum Rated Canadian Underwriters Laboratories, Inc: cUL C22.2 No. 24-93

Power Consumption

23W

0.13A, 7W 120 Vac

0.09A, 7W 230 Vac

Supply Voltag e

+10%, -15%

±10%

+20%, -10%

Electrical Connections

Two c o lo r coded leads

Appliance cable

Two c o lo r coded leads

Electrical Connection Length

39 in. 1 m CW

39 in. 1 m CCW

39 in. 1 m CW

39 in. 1 m CCW

39 in. 1 m CW

39 in. 1 m CCW

Spring Return Direction

392 customer.honeywell.com 70-6910