Hobart LEGACY HL120, LEGACY HL200 Instruction Manual
Models
HL120 ML-134296
HL200 ML-134331
HL200 ML-134289
PRIOR ML’S COVERED IN THIS CATALOG
HL200 ML-134308
INSTRUCTION MANUAL
701 S. RIDGE AVENUE TROY, OHIO 45374 -0001
937-332-3000 · W W W.HOBARTCORP.COM
F34922 Rev. B (May 2006)
TABLE OF CONTENTS
GENERAL ............................................................................................... 3
INSTALLATION............................................................................................... 3
Unpacking .............................................................................................3
Location ................................................................................................3
Electrical Connections ...........................................................................4
OPERATION ........................................................................................... 5
Standard Controls .................................................................................6
Recipe Timer Control.............................................................................7
Bowl Placement.....................................................................................8
Agitator .................................................................................................8
Prepare for Mixing .................................................................................9
Standard Timer Operation .....................................................................9
Recipe Timer Operation ................................................................................11
View Recipe ..................................................................................................12
Programming Recipe Timer ..........................................................................12
Unloading ............................................................................................14
Wire Cage............................................................................................14
Agitators and Attachments ...................................................................16
CLEANING ...................................................................................................17
MAINTENANCE ............................................................................................18
Lubrication ............................................................................................18
Adjustments ..........................................................................................19
TROUBLESHOOTING ............................................................................. 20
Service..................................................................................................20
© HOBART 2006
2
Installation, Operation and Care of
Legacy
12 & 20-Quart Mixers
SAVE THESE INSTRUCTIONS
GENERAL
The Legacy 12-quart mixer is a bench-type mixer which features a SmartTimer™, a manual bowl
lift and a #12 attachment hub as standard equipment.
The Legacy 20-quart mixer is a bench-type mixer which features a SmartTimer™, a manual bowl
lift and a #12 attachment hub as standard equipment. With the use of special agitators, a 12
quart bowl may be used on the HL200 mixer.
A variety of attachments, agitators and accessories are available. These are described in a
separate Use and Applications Handbook, which is furnished on the Legacy Mixer Operator
Training CD provided with each mixer.
INSTALLATION
TM
UNPACKING
Immediately after unpacking the mixer, check for possible shipping damage. If this machine is
found to be damaged after unpacking, save the packaging material and contact the carrier within
15 days of delivery.
LOCATION
Prior to installation, test the electrical service to assure that it agrees with the specifications
on the machine data plate.
Place the mixer on a suitable sturdy level surface. There should be adequate space around the
mixer for the user to operate the controls and to install and remove bowls.
Holes are located in the base to permanently secure the mixer, although this is not necessary
in normal installations.
3
ELECTRICAL CONNECTIONS (Cord Connected Mixers)
WARNING: THE ELECTRICAL CORD ON THIS MACHINE IS EQUIPPED WITH A THREE-
PRONGED GROUNDING PLUG WHICH MUST BE CONNECTED TO A PROPERLY GROUNDED
RECEPTACLE. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN
ELECTRICIAN. DO NOT REMOVE THE GROUNDING PRONG FROM THE PLUG.
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE
APPLICABLE PORTION OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL
ELECTRICAL CODES.
Check Initial Operation
1. Apply power to the mixer by inserting the cord plug into a properly grounded outlet.
2. Install the bowl and raise into mix position, with the bowl support up and bowl guard wire
cage closed.
3. Turn the SPEED dial pointer to STIR.
4. Momentarily run the machine by pushing the START and then STOP buttons.
4
OPERATION
WARNING: MOVING AGITATOR IN BOWL. KEEP HANDS, CLOTHING, AND UTENSILS OUT
OF BOWL WHILE IN OPERATION. DO NOT USE WITHOUT INTERLOCKED GUARD.
The Legacy mixer is equipped with SmartTimer
OPERATION section for their functions.
The bowl guard wire cage must be in closed position or the mixer will not operate.
The bowl must remain in mix position on bowl support and the bowl support must be raised (mix
position) or the mixer will not operate.
SLOT
ATTACHMENT
HUB
DRIP CUP
TM
controls. Refer to Fig. 1 for operating parts and
CONTROLS
SPLASH GUARD
BOWL GUARD
WIRE CAGE
AGITATOR
APRON
BOWL SUPPORT
Fig. 1
5
Standard Controls
Models HL120/HL200 (With Three Mix Speeds Plus Stir Speed)
DISPLAY MIXING
TIME
STOPS MIXER
STARTS MIXER
TIME
SELECTOR
SPEED SELECTOR
Fig. 2
HL120/HL200 Mixer Speeds
STIR (Slow) The lowest speed is for incorporating ingredients.
SPEED 1 (Low) This speed is for heavy mixtures such as pizza dough, heavy batters
and potatoes.
SPEED 2 (Medium) This speed is for mixing cake batters, mashing potatoes and developing
bread dough.
SPEED 3 (High) This speed is for incorporating air into light batches, as well as finishing
whipped items
6
Loading...