Hobart HPR1 User Manual

Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
HPR1 SERIES
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
ONE WIDE RETARDER PROOFER
Eye-level digital control panel mounted for easy access
- Set heat/humidity system
- Individual rack timers
Easy access heat and humidity system
- Internally mounted
- Energy efficient
Modular panel construction
Cam lock attachment
Stainless steel interior and exterior
No flushing required – low maintenance
Hydraulic door closure
Field reversible door
Self-contained refrigeration system for units with
interior depth 63" or less
MODEL CONFIGURATIONS
30" Interior Depth One Door – One Single End
or Side Load Rack (may be shipped assembled)
50" Interior Depth One Door – One Single End
or Two Single Side Load Racks or One Double Rack
63" Interior Depth One Door – Two Single End
or Three Single Side Load Racks or One Double Rack
83" Interior Depth One Door – Three Single
End or Four Single Side Load Racks or Two Double Racks
96" Interior Depth One Door – Three Single
End or Five Single Side Load Racks or Two Double Racks
116" Interior Depth One Door – Four Single
End or Six Single Side Load Racks or Three Double Racks
Specifications, Details and Dimensions on Inside and Back.
HPR1 SERIES ONE WIDE RETARDER PROOFER
OPTIONS
Side trim One side Both sides
Interior light
Remote refrigeration
R22 R134A R404
Rear trim
Stainless steel floor
Pass thru
Commonwealth of
Massachusetts
C1-05-05-20
F-40046 – HPR1 Series One Wide Retarder Proofer Page 1 of 4
HPR1 SERIES ONE WIDE RETARDER PROOFER
FRONT VIEW SIDE VIEW PLAN VIEW
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
30"
INTERIOR
DEPTH
50"
INTERIOR
DEPTH
63"
INTERIOR
DEPTH
*Door may be right
1 Water AFF 87" 2 Electrical AFF 87" 3 Drain AFF 5.5" 4 Refrigeration AFF 90"
Page 2 of 4 F-40046 – HPR1 Series One Wide Retarder Proofer
or left hinged
HPR1 SERIES
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
FRONT VIEW SIDE VIEW PLAN VIEW
83"
INTERIOR
DEPTH
ONE WIDE RETARDER PROOFER
96"
INTERIOR
DEPTH
116"
INTERIOR
DEPTH
*Door may be right
1 Water AFF 87" 2 Electrical AFF 87" 3 Drain AFF 5.5" 4 Refrigeration AFF 90"
F-40046 – HPR1 Series One Wide Retarder Proofer Page 3 of 4
or left hinged
Printed On Recycled Paper
HPR1 SERIES ONE WIDE RETARDER PROOFER
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
SPECIFICATIONS
GENERAL: 30" Interior Depth One Door – One Single End or Side Load
Rack (may be shipped assembled) 50" Interior Depth One Door – One Single End or Two Single
Side Load Racks or One Double Rack 63" Interior Depth One Door – Two Single End or Three
Single Side Load Racks or One Double Rack 83" Interior Depth One Door – Three Single End or Four
Single Side Load Racks or Two Double Racks 96" Interior Depth One Door – Three Single End or Five Single
Side Load Racks or Two Double Racks 116" Interior Depth One Door – Four Single End or Six Single
Side Load Racks or Three Double Racks
CONSTRUCTION: Stainless steel interior and exterior is standard. The interior perimeter is supplied with bumpers on all sides to protect the finish.
CONTROLS: Eye-level digital controls for precise heat and humidity control. Temperature and humidity can be set independently. Four individual count-down timers for products with different time requirements.
CAPACITY: Door opening will accommodate 75" high racks (standard), 72" high racks (pass thru).
HUMIDIFIER: Internally mounted, easy servicing. No flush cleaning required. Low maintenance spray mist system.
INSULATION: The proofer cabinet is rigid and formed of stainless steel panels with polyurethane foam insulation and sealed with gaskets to form a strong, energy efficient, tight and sanitary enclosure.
HARDWARE AND FITTINGS: Heavy-duty, plastic-coated door handle positioned horizontally. Positive action door closure.
FREIGHT CLASS: 85
1
For proper installation, floor should be level within not to exceed
3
4".
8" per foot
DETAILS AND DIMENSIONS
NOTE: The 30", 50", and 63" interior depth units have self-contained refrigeration system with a single evaporator. The 83", 96",
116" interior depth units have 2 evaporators and require remote refrigeration to be charged on-site. Water supply must have the proper hardness, pH and chloride concentration. The recommended water hardness range is 2-4 grains per gallon. The recom mended pH range is 7.0 to 8.0. The acceptable range for chloride concentration is 0-30 ppm. Consult your local water company and/or water conditioner dealer before installing the Proof Box.
PHYSICAL DATA 30" INTERIOR DEPTH 50" INTERIOR DEPTH 63" INTERIOR DEPTH Interior Dimensions 75" H x 30" D x 30.5" W 75" H x 50" D x 30.5" W 75" H x 63" D x 30.5" W
Rack Capacity 1 single end or 1 side load
Net Door Opening Height 75" STD / 72" Pass Thru 75" STD / 72" Pass Thru 75" STD / 72" Pass Thru Net Door Opening Width 30.5" 30.5" 30.5" Number of Doors 1 1 1 Exterior Dimensions 99.5" H x 36" D x 37.8" W 99.5" H x 56" D x 37.8" W 99.5" H x 69" D x 37.8" W
Power Input (w/neutral)*
Water Supply ½" FNPT @ 30-80 PSI ½" FNPT @ 30-80 PSI ½" FNPT @ 30-80 PSI Drain ½" FNPT To Air Gap ½" FNPT To Air Gap ½" FNPT To Air Gap Refrigeration Supplied (Std) 4250 BTU Condenser 4250 BTU Condenser 4250 BTU Condenser
Remote (optional)
208-240V/60Hz/1 18.4-20.4 A 208-240V/60Hz/3 18.4-20.4 A
One Evaporator Supplied Minimum
4250 BTU Required
1 single end, 2 side load,
or 1 double
208-240V/60Hz/1 18.4-20.4 A
208-240V60Hz/3 18.4-20.4 A
One Evaporator Supplied Minimum
4250 BTU Required
2 single end, 3 side load,
or 1 double
208-240V/60Hz/1 18.4-20.4 A 208-240V/60Hz/3 18.4-20.4 A
One Evaporator Supplied Minimum
4250 BTU Required
-
PHYSICAL DATA 83" INTERIOR DEPTH 96" INTERIOR DEPTH 116" INTERIOR DEPTH Interior Dimensions 75" H x 83" D x 30.5" W 75" H x 96" D x 30.5" W 75" H x 116" D x 30.5" W
Rack Capacity
Net Door Opening Height 75" STD / 72" Pass Thru 75" STD / 72" Pass Thru 75" STD / 72" Pass Thru Net Door Opening Width 30.5" 30.5" 30.5" Number of Doors 1 1 1 Exterior Dimensions 99.5" H x 89" D x 37.8" W 99.5" H x 102" D x 37.8" W 99.5" H x 122" D x 37.8" W
Power Input (w/neutral)*
Water Supply ½" FNPT @ 30-80 PSI ½" FNPT @ 30-80 PSI ½" FNPT @ 30-80 PSI Drain ½" FNPT To Air Gap ½" FNPT To Air Gap ½" FNPT To Air Gap
Refrigeration Remote Only
*Neutral wire circuitry needed to provide 110-120V for misc. control components. A separate line may be run or a transformer option will
be required if 110-120V is not available. Consult factory for 110-120V requirements. Consult factory for 50 Hz requirements. Electrical for remote refrigeration to be supplied by other.
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
3 single end, 4 side load,
or 2 double
208-240V/60Hz/1 37.0-42.0 A 208-240V/60Hz/3 32.0-37.0 A
Two Evaporators Supplied
Minimum 6000 BTU Required
3 single end, 5 side load,
or 2 double
208-240V/60Hz/1 37.0-42.0 A 208-240V/60Hz/3 32.0-37.0 A
Two Evaporators Supplied
Minimum 6000 BTU Required
4 single end, 6 side load,
or 3 double
208-240V/60Hz/1 37.0-42.0 A 208-240V/60Hz/3 32.0-37.0 A
Two Evaporators Supplied
Minimum 6000 BTU Required
Page 4 of 4 F-40046 – HPR1 Series One Wide Retarder Proofer
F-40046 (REV. 10/05) LITHO IN U.S.A. (H-01)
Loading...