Hobart 6430 General Manual
Item # _____________________________________
R
Quantity ___________________________________
C.S.I. Section 11400
6430 & 6460
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
■ Stainless steel housing for durability
■ Silicon carbide abrasive disk easily removed for
cleaning
■ Stainless steel drive shaft
■ Gray molded, heavy-duty hopper cover with
opening to monitor product
■ Peels 30 lbs. (Model 6430) or 50-60 lbs. (Model
6460) in one to three minutes
■ Heavy-duty motors for high volume, long life
■ 3⁄4 H.P. (Model 6430) or 1 H.P. (Model 6460)
motor
■ V-belt direct speed drive
■ Stainless steel construction
■ NSF approved removable Lexan liner
PEELER
MODEL
❑ 6430 – Peeler
❑ 6460 – Peeler
Specications, Details and Dimensions on Inside and Back.
■ Synchronous 5 minute timer (single phase only)
ACCESSORIES
❑ Cabinet base and peel trap with stainless steel
strainer
❑ Disposer stand (specify model FD3/50-6
disposer. Voltage for disposer must be the same
as disposer stand).
6430 & 6460 PEELER
Shown with optional
peel strainer and trap
F-7502 – 6430 & 6460 Peeler Page 1 of 4
6430 & 6460
PEELER
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
DETAILS, DIMENSIONS AND CONNECTIONS OF PEELER WITH PEEL TRAP UNIT
MODELS 6430 6460
Approximate Shipping Weight Peeler and Peel Trap Unit 201 lbs. 210 lbs.
Approximate Shipping Weight Peeler less Peel Trap Unit 147 lbs. 156 lbs.
Net Weight of Peeler and Peel Trap Unit 190 lbs. 198 lbs.
WARNING
ELECTRICAL AND GROUNDING CONNECTIONS MUST
COMPLY WITH THE NATIONAL ELECTRICA L CODE
AND/OR OTHER LOCAL ELECTRICAL CODES IN
FORCE. PLUMBING CONNECTIONS MUST COMPLY
WITH APPLICABLE SANITARY, SAFETY AND PLUMBING
CODES IN FORCE.
Page 2 of 4 F-7502 – 6430 & 6460 Peeler
Loading...