GLO-RAY
Models GRSDH-24, -30, -36, -41, -52, -60 GRSDH-24D, -30D, -36D, -41D, -52D, -60D GRSDS-24, -30, -36, -41, -52, -60
GRSDS-24D, -30D, -36D, -41D, -52D, -60D, -24T, -36T GRSDS/H -30D, -36D, -41D, -30DHW, -36DHW, -41DHW
The perfect unit to merchandise hot fast
foods is the Hatco Glo-Ray® Merchandising
Display Warmer. Designed specifically to hold
hot wrapped or boxed product, this unit
holds hot food safely at proper serving
temperatures. Glo-Ray Merchandising
Warmers have prefocused infrared top heat
and a thermostatically-controlled hardcoated
heated base to extend the holding times
of most food.
Hardcoated shelves, adjustable dividers,
shatter-resistant incandescent display lights,
and 6' (1829 mm) cord with plug are
standard.
FLEXIBILITY
This warmer offers the convenience of selfserve and the efficiency of kitchen-to-server
holding.
Available with horizontal shelves, the Glo-Ray
Merchandising Warmers are offered in both
single and dual shelf models. Slant shelves are
offered in single, dual and triple shelf models.
Specially coated incandescent lights
illuminate the food holding area.
Designed with a slanted base and horizontal
shelf, the GRSDS/H series is ideal for holding
popcorn on the top shelf and nachos, boxed
pizza, or wrapped sandwiches on the
bottom shelf. An optional high wattage top
shelf is ideal for holding fried foods and an
optional top shelf clearance of 15" (381 mm)
is also available.
Slant models 30" (762 mm) and wider will
accommodate 18" x 26" (457 x 660 mm)
sheet pans.
QUALITY
The following features assure the finest
performance for years to come:
• All models have prefocused infrared top
heat directing heat to the outer edges
of the holding surface where heat loss
is the greatest.
• These warmers feature a thermostaticallycontrolled, hardcoated heated base and
a cord and plug set.
• Coated shatter-resistant incandescent lights
enhance product display while safeguarding
food products from bulb breakage.
• An optional Indicating Temperature Control
enhances accurate control of temperature
and provides digital readout of temperature.
ITEM#
®
MERCHANDISING DISPLAY WARMERS
Model GRSDH-36
horizontal single shelf
Model GRSDS-24T triple slant
shelf in optional Designer black
Model GRSDS/H-36D with
slant shelf and horizontal shelf
Divider Rods
Model Width No. of DividerRods Average Chute Width
24" ( 610 mm) 5 Rods 3.75" ( 95 mm)
30" ( 762 mm) 6 Rods 4.25" (108 mm)
36" ( 914 mm) 7 Rods 4.5" (114 mm)
41" (1041 mm) 8 Rods 4.5" (114 mm)
52" (1321 mm) 10 Rods 4.63" (117 mm)
60" (1524 mm) 12 Rods 4.5" (114 mm)
Provided per Shelf
METAL SHEATHED HEATING ELEMENTS GUARANTEED
AGAINST BURNOUT AND BREAKAGE FOR TWO YEARS,
BLANKET ELEMENTS FOR ONE YEAR.
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
(800) 558-0607 • (414) 671-6350 • Fax (800) 543-7521 • Int’l. Fax (414) 671-3976
www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Form No. GRSD Spec Sheet
Printed in U.S.A.
November 2009