PARTS LIST
PART |
DESCRIPTION |
QTY |
1FL |
Front Left Side Rail |
1 |
1FR |
Front Right Side Rail |
1 |
1RL |
Rear Left Side Rail |
1 |
1RR |
Rear Right Side Rail |
1 |
2A |
Cross Member |
1 |
2B |
Cross Member |
5 |
3L |
Left Connecting Rail |
1 |
3R |
Right Connecting Rail |
1 |
4 |
Spare Tire Bar |
1 |
5 |
“T” Plate |
1 |
6 |
Coupler Base |
1 |
7 |
Coupler |
1 |
8 |
Safety Chain |
1 |
9 |
“L”Latch |
2 |
10 |
Rotation Plate (Flat) |
2 |
11L |
Left Rotation Plate |
1 |
11R |
Right Rotation Plate |
1 |
12L |
Spring Hanger |
1 |
12R |
Spring Hanger |
1 |
13 |
Caster |
4 |
14 |
Spring Plate |
2 |
15 |
Spring |
2 |
16 |
Axle |
1 |
17 |
V-Bolt |
4 |
18 |
Hub |
2 |
19 |
Tire/Rim Assembly |
2 |
20 |
Bearing |
2 |
21 |
Dust Cap |
2 |
22 |
Fender |
2 |
23 |
Fender Seat |
2 |
24 |
Side Running Light |
2 |
25 |
Stake Clamp |
8 |
26 |
Tail Light Bracket |
2 |
27 |
License Plate Bracket |
1 |
28L |
Left Tail Light |
1 |
28R |
Right Tail Light |
1 |
29 |
Safety Pin |
1 |
30L |
Caster Base (Left) |
1 |
30R |
Caster Base (Right) |
1 |
31 |
Grease Fitting |
2 |
32 |
Seal |
2 |
PART |
DESCRIPTION |
QTY |
A |
M10X20 Bolt |
64 |
B |
M10X30 Bolt |
14 |
C |
M10X50 Bolt |
1 |
D |
M10X30 Carriage Bolt |
4 |
E |
M14X80 Bolt |
6 |
G |
M10 Nylon Nut |
92 |
H |
M10 Hex Nut |
1 |
I |
M14 Hex Nut |
6 |
J |
M12 Lug Nut |
8 |
K |
M20 Castle Nut |
2 |
L |
10 Spring Washer |
8 |
N |
20 Flat Washer |
2 |
O |
4 Cotter Pin |
2 |
P |
3 Cotter Pin |
6 |
Q |
3mm “R” Pin |
2 |
R |
4mm Self Tapping Screw |
4 |
S |
2mm “R” Pin |
1 |
W |
M10X90 Bolt |
2 |
Page 2 |
For technical questions, please call 1-800-444-3353. |
Item 42709 |
Item 42709 |
For technical questions, please call 1-800-444-3353. |
Page 3 |
Page 4 |
For technical questions, please call 1-800-444-3353. |
Item 42709 |
DON’T TIGHTEN YET!
TO MAKE ASSEMBLY EASIER, wait until assembly is complete and all hardware is in place before tightening any nut or bolt. Leave hardware snug until then.
Item 42709 |
For technical questions, please call 1-800-444-3353. |
Page 5 |
DON’T TIGHTEN YET!
TO MAKE ASSEMBLY EASIER, wait until assembly is complete and all hardware is in place before tightening any nut or bolt. Leave hardware snug until then.
nut as diagram shows. Do not overtighten the nuts to allow trailer to fold easily.
Page 6 |
For technical questions, please call 1-800-444-3353. |
Item 42709 |
DON’T TIGHTEN YET!
TO MAKE ASSEMBLY EASIER, wait until assembly is complete and all hardware is in place before tightening any nut or bolt. Leave hardware snug until then.
Item 42709 |
For technical questions, please call 1-800-444-3353. |
Page 7 |
DON’T TIGHTEN YET!
TO MAKE ASSEMBLY EASIER, wait until assembly is complete and all hardware is in place before tightening any nut or bolt. Leave hardware snug until then.
Page 8 |
For technical questions, please call 1-800-444-3353. |
Item 42709 |
Loading...