Grandview Wireless Synchro Converter User Manual

Instructions Manual For

Wireless Synchro Converter ( RF to IR )

Description

Signal Programming

Indicator Light

Wireless Synchro Converter (RF to IR) Receiver Head

Output

Usage

1

Indicator Light

3.5 Stereo Input

2

Model 868M-IR

Interface 3.5 Double-Channel Input

Frequency 868MHz

Demodulation FM

IR Receiver

Converter Unit

Indicator Light

Figure 2

Figure 1

1. Connect power to the screen (figure 1), and then the
indicator light stays on that Wireless Synchro Converter is
ready for using.

3

Wireless Synchro Converter

Clear memory: press the signal programming button for 5 seconds, and then the
indicator light will flesh repeatedly. At the same time, release the button then press
this button again for clearing the memory.

2. Please run the programming process firstly if this is the first
time for using this product.
Method: press the signal programming button via a small pin
(figure 2). Press the signal programming button, and then the
indicator light will flesh repeatedly (this process will finish after
60 seconds). After the emitter sends out the project of
programming the indicator light will stop flashing and stay on.

Synchro Power Relay

Ceiling
Projector Ceriling Mount

Fixation Belt

Projector

This product can only be used in Grandview Integrated Motorized Screen with EXT CTRL input .

Grandview Crystal Screen Canada Ltd.

#11- 3751 North Fraser Way, Marine Way Business Centre,
Burnaby, BC, Canada V5J 5G4
Tel: [phone] Fax: [phone]
Website: www.grandviewscreen.ca

Guangzhou Grandview Crystal Screen Co., Ltd.

P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road,
Shatou, Panyu District, Guangzhou, Guangdong, China
Tel: [phone] Fax: [phone]
Website: www.grandviewscreen.com