GA-J3455N-D3H
User's Manual
Rev. 1001
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment.
Motherboard
GA-J3455N-D3H
Motherboard
GA-J3455N-D3H
Mar. 3, 2017
Mar. 3, 2017
Copyright
© 2017 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
ChangestothespecificationsandfeaturesinthismanualmaybemadebyGIGABYTEwithoutpriornotice.
No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission.
In order to assist in the use of this product, carefully read the User's Manual.
For product-related information, check on our website at: http://www.gigabyte.com
Identifying Your Motherboard Revision
The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard BIOS, drivers, or when looking for technical information.
Example:
Table of Contents
GA-J3455N-D3H Motherboard Layout............................................................................. |
4 |
|
Chapter 1 Hardware Installation...................................................................................... |
5 |
|
1-1 |
Installation Precautions..................................................................................... |
5 |
1-2 |
Product Specifications...................................................................................... |
6 |
1-3 |
Installing the Memory........................................................................................ |
8 |
1-4 Installing an Expansion Card............................................................................ |
8 |
|
1-5 |
Back Panel Connectors.................................................................................... |
8 |
1-6 |
Internal Connectors........................................................................................ |
10 |
Chapter 2 BIOS Setup................................................................................................... |
16 |
|
2-1 |
Main................................................................................................................ |
17 |
2-2 |
Advanced........................................................................................................ |
18 |
2-3 |
Security........................................................................................................... |
22 |
2-4 |
Boot................................................................................................................ |
24 |
2-5 |
Save & Exit..................................................................................................... |
25 |
Chapter 3 Appendix....................................................................................................... |
26 |
|
Drivers Installation..................................................................................................... |
26 |
|
Regulatory Statements.............................................................................................. |
27 |
|
Contact Us................................................................................................................. |
29 |
- 3 -
|
LPT |
|
KB_MS |
|
|
|
ATX_12V |
|
TPM |
iTE® |
|
COMA COMB |
Super I/O |
|
CLR_CMOS |
||
|
CI |
|
|
Intel® Apollo Lake J3455 |
|
|
M_BIOS |
|
HDMI VGA |
CPU_FAN |
|
Genesys Logic |
||
|
||
|
USB 2.0 Hub |
USB_LAN2 |
BAT |
|
GA-J3455N-D3H |
|
|
SODIMM_2 |
|
|
|
|
Realtek® |
|
|
|
|
|
|
|
|
|
GbE LAN |
|
|
|
USB30_LAN1 |
F_AUDIOF_USB2 F_USB30 |
|
|
|
|
|
|
||
AUDIO |
|
F_USB1 |
SATA3 |
3 1 |
CODEC |
|
2 0 |
||
|
|
|
||
|
PCI |
|
|
|
BUZZER
F_PANEL
ATX
SODIMM_1
SYS_FAN
PCIe to PCI
Bridge
Box Contents
55 |
GA-J3455N-D3H motherboard |
|
|
55 |
Motherboard driver disk |
55 |
Two SATA cables |
55 |
User's Manual |
55 |
I/O Shield |
*The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice.
-4 -
The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures:
•• Prior to installation, make sure the chassis is suitable for the motherboard.
•• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or warranty sticker provided by your dealer. These stickers are required for warranty validation.
•• Always remove the AC power by unplugging the power cord from the power outlet before installing or removing the motherboard or other hardware components.
•• When connecting hardware components to the internal connectors on the motherboard, make sure they are connected tightly and securely.
•• When handling the motherboard, avoid touching any metal leads or connectors.
•• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap, keep your hands dry and first touch a metal object to eliminate static electricity.
•• Prior to installing the motherboard, please have it on top of an antistatic pad or within an electrostatic shielding container.
•• Before connecting or unplugging the power supply cable from the motherboard, make sure the power supply has been turned off.
•• Before turning on the power, make sure the power supply voltage has been set according to the local voltage standard.
•• Before using the product, please verify that all cables and power connectors of your hardware components are connected.
•• To prevent damage to the motherboard, do not allow screws to come in contact with the motherboard circuit or its components.
•• Make sure there are no leftover screws or metal components placed on the motherboard or within the computer casing.
•• Do not place the computer system on an uneven surface.
•• Do not place the computer system in a high-temperature or wet environment.
•• Turning on the computer power during the installation process can lead to damage to system components as well as physical harm to the user.
•• If you are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician.
•• If you use an adapter, extension power cable, or power strip, ensure to consult with its installation and/or grounding instructions.
- 5 -
1-2 |
Product Specifications |
||
|
|
|
|
|
CPU |
|
Built in with an Intel® Quad-Core Celeron® J3455 SoC (2.3 GHz) |
|
|
|
* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage |
|
|
|
to these components. |
|
|
|
2 MB Cache |
|
Memory |
|
2 x DDR3L SO-DIMM sockets supporting up to 16 GB of system memory |
|
|
Dual channel memory architecture |
|
|
|
Support for DDR3L 1866/1600/1333 MHz memory modules |
|
|
|
Support for non-ECC memory modules |
|
|
Onboard |
|
Integrated in the SoC: |
|
Graphics |
|
- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz |
-1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz
Audio |
|
Realtek® ALC887 codec |
|
High Definition Audio |
|
|
|
2/4/5.1/7.1-channel |
*To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
LAN |
|
2 x Realtek® GbE LAN chips (10/100/1000 Mbit) |
Expansion Slots |
|
1 x PCI slot |
|
|
|
Storage Interface |
|
Integrated in the SoC: |
|
|
- 2 x SATA 6Gb/s connectors (SATA3 0, SATA3 1) |
|
|
ASMedia® ASM1061 chip: |
|
|
- 2 x SATA 6Gb/s connectors (SATA3 2, SATA3 3) |
USB |
|
Integrated in the SoC: |
|
|
- 4 x USB 3.1 Gen 1 ports (2 ports on the back panel, 2 ports available through |
|
|
the internal USB header) |
|
|
SOC + GENESYS LOGIC USB 2.0 Hub: |
|
|
- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through |
|
|
the internal USB headers) |
Internal |
|
1 x 24-pin ATX main power connector |
Connectors |
|
1 x 4-pin ATX 12V power connector |
|
|
4 x SATA 6Gb/s connectors |
|
|
1 x CPU fan header |
|
|
1 x system fan header |
|
|
1 x front panel header |
|
|
1 x front panel audio header |
|
|
1 x USB 3.1 Gen 1 header |
|
|
2 x USB 2.0/1.1 headers |
|
|
1 x parallel port header |
|
|
1 x Clear CMOS jumper |
|
|
1 x chassis intrusion header |
- 6 -
Back Panel |
1 x PS/2 keyboard port |
|
Connectors |
1 x PS/2 mouse port |
|
|
2 x serial ports |
|
|
1 x D-Sub port |
|
|
1 x HDMI port |
|
|
2 x USB 3.1 Gen 1 ports |
|
|
2 x USB 2.0/1.1 ports |
|
|
2 x RJ-45 ports |
|
|
3 x audio jacks (Line In, Line Out, Mic In) |
|
I/O Controller |
iTE® I/O Controller Chip |
|
Hardware |
|
Voltage detection |
Monitor |
|
Temperature detection |
|
Fan speed detection |
|
|
Fan speed control |
|
|
|
* Whether the fan speed control function is supported will depend on the cooler you |
|
|
install. |
BIOS |
1 x 64 Mbit flash |
|
|
Use of licensed AMI UEFI BIOS |
|
|
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
Unique Features Support for Xpress InstallSupport for @BIOS
Support for APP Center
*Available applications in APP Center may vary by motherboard model. Supported functionsofeachapplicationmayalsovarydependingonmotherboardspecifications.
Bundled |
Norton® Internet Security (OEM version) |
|
Software |
|
|
Operating |
Support for Windows 10 64-bit |
|
System |
||
|
||
Form Factor |
Mini-ITX Form Factor; 17.0cm x 17.0cm |
*GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice.
Please visit GIGABYTE's website for support lists of memory modules.
Please visit the Support\Utility List page on GIGABYTE's website to download the latest version of apps.
Please visit GIGABYTE's website for details on hardware installation. - 7 -
Read the following guidelines before you begin to install the memory:
•• Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
•• Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage.
•• Memory modules have a foolproof design. A memory module can be installed in only one direction. If you are unable to insert the memory, switch the direction.
Dual Channel Memory Configuration
This motherboard provides two memory sockets and supports Dual Channel Technology. After the memory is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling Dual
Channel memory mode will double the original memory bandwidth.
The two memory sockets are divided into two channels and each channel has one memory socket as following:
Channel A: SODIMM_1Channel B: SODIMM_2
Due to SoC limitations, read the following guidelines before installing the memory in Dual Channel mode.
1.If only one DDR3L memory module is to be installed, be sure to install it in the SODIMM_1 socket, and Dual Channel mode cannot be enabled if only one memory module is installed.
2.When enabling Dual Channel mode with two memory modules, it is recommended that memory of the same capacity, brand, speed, and chips be used for optimum performance.
Read the following guidelines before you begin to install an expansion card:
•• Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card.
•• Always turn off the computer and unplug the power cord from the power outlet before installing an expansion card to prevent hardware damage.
PS/2 Keyboard and PS/2 Mouse Port
Use this port to connect a PS/2 mouse or keyboard. and the lower port (purple) to connect a PS/2 keyboard.
Serial Port
Use the serial port to connect devices such as a mouse, modem or other peripherals.
D-Sub Port
The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200@60 Hz (the actual resolutions supported depend on the monitor being used). Connect a monitor that supports D-Sub connection to this port.
- 8 -
HDMI Port
The HDMI port is HDCP compliant and supports Dolby TrueHD and DTS HD
Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution is 3840x2160@30 Hz, but the actual resolutions supported are dependent on the monitor being used.
After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The
item name may differ depending on your operating system.)
Dual-Display Configurations for the Onboard Graphics:
Dual-display configurations are supported after you install motherboard drivers in OS.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following describes the states of the LAN port LEDs.
Connection/ |
|
|
|
|
|
|
|
|
Connection/Speed LED: |
|
Activity LED: |
|
|||||||
Speed LED |
|
|
|
Activity LED |
|
|
|||||||||||||
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
State |
Description |
|
State |
Description |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Orange |
1 Gbps data rate |
|
Blinking |
Data transmission or receiving is occurring |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Green |
100 Mbps data rate |
|
Off |
No data transmission or receiving is occurring |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Off |
10 Mbps data rate |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
LAN Port |
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices.
USB 3.1 Gen 1 Port
The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specification and is compatible to the USB 2.0 specification. Use this port for USB devices.
Line In (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out (Green)
The line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to connect front speakers in a 4/5.1/7.1-channel audio configuration.
Mic In (Pink)
The Mic in jack.
To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. Please visit GIGABYTE's website for more software information.
•• When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard.
•• When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector.
- 9 -