General 10-510CF M1, 10-510 M1 User Manual
SETUP & OPERATION MANUAL
FEATURES
Totally enclosed, fan cooled, permanently
lubricated motor.
Heavy-duty design with a continuous duty
rating, for industrial applications.
Heavy-duty base with eight swivel casters
for smooth movement around the shop.
Magnetic safety switch.
Equipped with heavy-duty collection bags
made from extra thick, transparent, recyclable plastic and 2 micron filter bags to trap
fine sawdust. (Not included on “CF” canister
filter model)
Extremely durable heavy-duty steel impeller.
Quick-release bag clamps for fast and easy
bag changes.
5 HP DUST COLLECTOR
10-510CF
10-510
SPECIFICATIONS
INLET DIAMETERS
1 x 9” (228 mm)
4 x 4” (102 mm)
AIRFLOW CAPACITY
3980 CFM
BLOWER WHEEL
13” (330 mm)
SOUND RATING
93 dB
BAG DIAMETER
24” (610 mm)
BAG CAPACITY
144 GAL (655 L)
STATIC PRESSURE
1/2
18
” OF WATER
OVERALL DIMENSIONS (L x W x H)
77” x 26” x 104” (1956 x 660 x 2642 mm) #10-510
77” x 26” x 94” (1956 x 660 x 2388 mm) #10-510CF
MOTOR
M1 : 5 HP, 220 V, 1 Ph, 34 A
M2 : 5 HP, 220 V, 3 Ph, 15 A
M3 : 5 HP, 600 V, 3 Ph, 6 A
WEIGHT
370 LBS (168 kg)
MODEL
#10-510 M1
#10-510CF M1
VERSION 2_REVISION 1 - January 2015
© Copyright General® International
GENERAL® INTERNATIONAL
8360 Champ-d’Eau, Montreal (Quebec) Canada H1P 1Y3
Telephone (514) 326-1161 • Fax (514) 326-5555 • www.general.ca
THANK YOU for choosing this General
®
International model 10-510/510CF dust
collector. This dust collector has been carefully tested and inspected before shipment and
if properly used and maintained, will provide you with years of reliable service. To ensure
optimum performance and trouble-free operation, and to get the most from your investment,
please take the time to read this manual before assembling, installing and operating the unit.
The manual’s purpose is to familiarize you with the safe operation, basic function, and features
of this dust collector as well as the set-up, maintenance and identification of its parts and components. This manual is not intended as a substitute for formal woodworking instruction, nor
to offer the user instruction in the craft of woodworking. If you are not sure about the safety of
performing a certain operation or procedure, do not proceed until you can confirm, from
knowledgeable and qualified sources, that it is safe to do so.
Once you’ve read through these instructions, keep this manual handy for future reference.
GENERAL® INTERNATIONAL WARRANTY
All component parts of General® International machinery are carefully tested and inspected during all stages of
production, and each machine is thoroughly inspected upon completion of assembly. Because of our commitment to quality and customer satisfaction, General® International agrees to repair or replace, within a period of
24 months from date of purchase, any genuine part or parts which, upon examination, prove to be defective in
workmanship or material. In order to obtain this warranty, all defective parts must be returned freight pre-paid to
General® International Mfg. Co., Ltd. Repairs attempted without our written authorization will void this warranty.
Disclaimer: The information and specifications in this manual pertain
to the unit as it was supplied from the factory at the time of printing. Because we are committed to making constant improvements,
®
General
nents, parts or features of this unit as deemed necessary, without prior
notice and without obligation to install any such changes on previously
delivered units. Reasonable care is taken at the factory to ensure that
the specifications and information in this manual corresponds with that
of the unit with which it was supplied. However, special orders and
International reserves the right to make changes to compo-
“after factory” modifications may render some or all information in this
manual inapplicable to your machine. Further, as several generations
of this dust collector and several versions of this manual may be in circulation, if you own an earlier or later version of this unit, this manual may
not depict your machine exactly. If you have any doubts or questions
contact your retailer or our support line with the model and serial
number of your unit for clarification.
Rules for Safe Operation
To help ensure safe operation, please take a moment to learn the machine’s applications and limitations, as well as potential hazards. General® International disclaims any real or implied warranty and
holds itself harmless for any injury that may result from improper use of its equipment.
1. Do not operate this machine without either a filter bag
or filter cartridge properly installed on the unit.
2. Keep the work area well lit, clean and free of debris.
3. Do not handle the electrical plug with wet hands.
4. Do not use this unit outdoors or on or near wet sur-
faces.
5. Always turn on the dust collector before starting the
dust producing machine. Always turn off the dust pro ducing machine before turning off the dust collector.
6. Do not vacuum anything that is burning, smoking or
smoldering such as cigarettes, matches or hot ashes.
7. Stay alert! Give your work your undivided attention.
Even a momentary distraction can lead to serious
injury.
8. Fine particulate dust is a carcinogen that can be
hazardous to health. Work in well ventilated area and
wear eye, ear and respiratory protection, devices.
9. Do not wear loose clothing, gloves, bracelets, neck laces, or other jewelry.
10. Do not vacuum or use this Dust Collector near flamma ble or combustible liquids, gases, gasoline or other
fuels, lighter fluid, cleaners, oil or solvent based paints,
natural gas, hydrogen or explosive dusts like coal dust,
magnesium dust, grain dust or gun powder.
11. Do not operate Dust Collector when tired, distracted
or under the effects of drugs, alcohol or any medica tion that impairs reflexes or alertness.
12. Do not operate the unit until a dust hose is installed
onto the hose inlet.
13. Never leave the machine unattended while running or
with the power on.
14. To avoid health hazards from vapors or dusts, do not
vacuum toxic material.
15. Do not insert hands or fingers or any foreign objects
into ventilation inlet and outlet openings.
16. Childproof and tamper proof your shop and all
machinery with locks, master electrical switches and
switch keys to prevent unauthorized or supervised use.
17. Keep children and visitors at a safe distance when the
unit is running. Do not permit them to use the
machine.
18. Use only recommended accessories. Use of acces-
sories NOT recommended by General® International
may result in a risk of injury or damage to the
machine.
19. Make sure the unit is properly grounded. If equipped
with three-prong plug, it should be plugged into a
three-pole receptacle. Never remove the third-prong.
20. Always disconnect the unit form the power source
before servicing, performing any maintenance or
repairs and when changing bags or hoses, or if the
machine will be left unattended.
21. Do not use this Dust Collector for other than it is
intended use. If used for other purposes,
GENERAL® INTERNATIONAL disclaims any real or
implied warranty and holds itself harmless for any
injury, which may result from that use.
22. Clean filters (bags on 10-510 or cartridges 10-510CF)
on a regular basis and replace as needed.
ELECTRICAL REQUIREMENTS
AMPERAGE DRAW
Before connecting the machine to the power
source, verify that the voltage of your power supply corresponds with the voltage specifed on the
motor I.D. nameplate. A power source with greater voltage than needed can result in serious injury
to the user as well as damage to the machine. If
in doubt, contact a qualified electrician before
connecting to the power source.
ELECTRICAL CONNECTION/DISCONNECTION:
ELECTRICAL CONNECTION
Both a manual circuit breaker or similar device as well
as an electrical plug are recommended and should
be installed by a qualified electrician. Use locally
approved wire that includes a separate grounding
wire, and a 3 prong grounding type plug with matching receptacle.
ELECTRICAL DISCONNECTION
Be sure to disconnect this machine from the power
source whenever maintenance, adjustments, or servicing is required.220 V Single-Phase 10-510 M1 & 10-510CF
M1 operate on power only.
Note: Voltage requirements and amperage draw for
M2 & M3 3-phase motors may not be fully described
in this manual. For complete electrical requirements,
refer to the motor I.D. name plate on the machine. If in
doubt, consult a licensed, qualified electrician before
proceeding.
Never connect the machine to a power source with
greater voltage than needed. Failure to comply
could result in serious injury to the user and/ or dam
age to the machine.
MODEL 10-510 & 10-510CF
MOTOR HP VOLTAGE PHASE AMPERAGE
M1 5 220 V 1 PH 34 A
M2 5 220 V 3 PH 15 A
M3 5 600 V 3 PH 6 A
CIRCUIT REQUIREMENTS:
Only connect your machine to a circuit using wiring
and a circuit breaker that are capable of handling the
amperage draw from your machine, as well as any
other machines that could be operating on the same
circuit. If you are unsure, consult a qualified electrician
before proceeding.
GROUNDING INSTRUCTIONS:
IN THE EVENT OF AN ELECTRICAL MALFUNCTION OR
SHORT CIRCUIT, grounding reduces the risk of electric
shock. This tool is equipped with a power cord that has
a grounding wire, which must be properly connected
to the grounding prong on the plug; likewise, the outlet
must be properly installed and grounded. All electrical
connections must be made in accordance with local
codes and ordinances.
Electrocution, fire or damage to the machine could
result if this machine is not grounded correctly or if
your electrical configuration does not comply with
local municipal and state or provincial codes and
regulations. Ensure compliance by consulting with a
-
EXTENSION CORDS:
The use of an extension cord is not recommended on 220V
equipment.
licensed and qualified electrician.
4
5 HP DUST COLLECTOR
10-510
IDENTIFICATION OF MAIN PARTS AND COMPONENTS
10-510
A. MIDDLE BASE PLATE
B. SIDE BASE PLATE
C. LEG
D. COLLECTOR BODY W/FAN & MOTOR ASSEMBLY
E. DRUM
F. CASTER
G. UPPER BAG SUPPORT ROD
H. BAG HANGER
I. COLLECTOR BAG
J. FILTER BAG
K. HOSE INLET (4-HOLE MANIFOLD)
L. VERTICAL SUPPORT ROD
M. BELT CLAMP
N. SWITCH ASSEMBLY
5
5 HP DUST COLLECTOR
10-510CF
IDENTIFICATION OF MAIN PARTS AND COMPONENTS
10-510CF
A. MIDDLE BASE PLATE
B. SIDE BASE PLATE
C. LEG
D. COLLECTOR BODY W/FAN & MOTOR
ASSEMBLY
E. DRUM
F. CASTER
G. FILTER CLEANING HANDLE
H. BELT CLAMP
I. COLLECTOR BAG
J. CANISTER FILTER
K. HOSE INLET (4-HOLE MANIFOLD)
L. VERTICAL SUPPORT ROD
M. SWITCH ASSEMBLY
6
Loading...