GE Industrial Solutions EP1000 User Manual

EP1000 Rectiers (SPS Rectifiers)

The SPS rectiers are single phase, hot-pluggable, fan cooled rectiers that provide highly
reliable DC power. The SPS EP1000 rectiers are cost-eective rectiers that occupy just 1RU

and it’s shallow depth is an ideal power solution for space critical applications. The constant
output power characteristics as well as the extended temperature range, universal AC input

voltage range and compact size are key attributes that make this rectier the right choice for

your power needs.

These rectiers are applicable for indoor and outdoor environments especially where equipment
depth and height are restricted. The SPS rectiers communicate digitally to the Pulsar Edge

controller family over a RS485 bus to add extensive monitoring and alarm management facilities.

Its exible and sophisticated feature set makes this front-end supply an excellent choice for

power in a variety of application spaces.

Applications

TECHNICAL SPECIFICATIONS - RECTIFIERS

• Telecommunications networks

• Digital subscriber line (DSL)

• Indoor/outdoor wireless

• Routers/switches

Key Features

• Extended temperature range

• Redundant fan cooling

• Front panel LED indicators

• 1U height, minimized depth

Input

Voltage Range

- Low-Line

- High-Line

Input Frequency 45-65 Hz

Input Current 6 Amps

Inrush Transient 16 Apk

Total Harmonic Distortion (THD) < 5 %

Power Factor ~1.0

Holdup Time >10 ms full power

90 – 175 Vac (500W)
176 – 290 Vac (1000W)

• Fiber in the loop

• Transmission

• Data networks

• PBX

• Universal AC input

• Analog load sharing

• Hot pluggable

• RoHS compliant

Output

Voltage Nominal 52 Vdc

Voltage Adjust Range 42-58 Vdc (software control)

Rated Output Current

- Low-Line

- High-Line

Rated Output Power

- Low-Line

- High-Line

Psophometric Noise <2 mV max

Ripple <200 mVpkpk

Overvoltage Protection 59.5 Vdc

10 Adc max
20 Adc max

500 Watts
1000 Watts

Slimline Power System Brochure

07/12

Control and Monitoring

Visual Status Indicators Run, Alarm and Fault LEDs

Serial Interface Half duplex RS485 (GP Protocol)

Page 1

© 2012 General Electric Company. All rights reserved.

TECHNICAL SPECIFICATIONS - RECTIFIERS

Environmental

Operating Temperature -40°C to +75°C

Storage Temperature -40°C to +85 °C

Power Derating > +65°C 2% per degree Celsius

Relative Humidity 95% max, non-condensing

Altitude 4000m max

Audible Noise < 55dBA

Mechanical

Length (in./mm) 8.11 / 206.0

Width (in./mm) 4.98 / 126.5

Height (in./mm) 1.64 / 41.6

Weight (lb/kg) 3.08 / 1.4

Outline Drawing

0.08 (2.0mm)

General

Cooling Redundant Fan Cooled

Eciency >90%

Heat Dissipation 97 W / 331 BTU

Safety and Standards Compliance

NEBs Evaluated by independent NRTL test

lab to Telcordia GR63 and GR1089­CORE, Issue 4

Safety CE mark to Low Voltage Directive

2006/95/EC and EMC Directive
2004/108/E

UL 609501-1 Recognized

CSA C22.2 No. 60950-1-03 Certied

VDE0805:200112 (EN 609501) Licensed

RoHS Compliant to RoHS EU Directive

2002/95/EC

EMC FCC and EN 55022, Class B; FCC, Class

B

ESD EN61000-4-2, Level 4

8.11 (206mm)

0.45 (11.5mm)

1.64

(41.6mm)

4.98 (126.5mm)

0.75 (19.0mm)

(116.5mm)

3.09

(78.6mm)

0.63 (15.9mm)

0.24

(6.10mm)

1.58 (40.2mm)

4.59

Slimline Power System Brochure

07/12

Page 2

© 2012 General Electric Company. All rights reserved.