GE Industrial Solutions EP0300AC48TEZ User Manual

Product Description

The rectifier EP0300AC48TE is a compact, single phase, hot­pluggable, fan-cooled rectifier and battery charger for stand­alone use or for working in parallel as part of a DC power system
equipped with advanced digital controller. The constant output
power (300W i.e. 5.5A at 54V) characteristic supplies the specified
power over the full output voltage range (48 to 58Vdc).

There is a digital communication (RS-485 bus) between rectifier
and controller which allows flexible system design.

EP0300AC48TEZ

300W Output at 48-58Vdc

Key Features

Efficient rectifier

>90%

Rugged rectifier

Exclusively designed to take care of wide line fluctuations and harsh
conditions

¾ Can withstand up to 300Vac (Line-Neutral) without any

damage

¾ Can work up to +75°C

Optimum power performance

Constant power between 90V … 290V ac

Compact and light

3 rectifiers can be accommodated in one row (19” shelf) with
controller and distribution

Applications

The typical applications for this rectifier are both in indoor and
outdoor environments and include:

 SCADA/ DMS System
 EPBAX
 Broadband
 IP telephony
 Cable Television
 LTE
 GPON
 Enterprise solution

See reverse side for specifications

Technical Specifications

Input Parameters

Operating Voltage range

Full Power input voltage
Range

Frequency 45 to 65Hz
Maximum Current 4A (rms) 230Vac,100% load

Power Factor > 0.99 at 230Vac,100% load

Total Current Harmonic
Distortion (THD)

Efficiency ≥ 90%. 230Vac,100% load
Input protection In built surge protection (2kV/3kA)
Inline fuse

90-290 Vac
Disconnect: < 90Vac & > 290Vac
No damage up to 300Vac
90-290 Vac

< 10% at 230Vac,100% load

Output Parameters

Voltage, nominal 48 Vdc

Voltage adjust range 42 … 57 Vdc (controller)

Rated output Power

300W

Output Current @...V 5.5A@54V

Maximum current 6.25A

Static Voltage regulation ±1% from 10% to 100% load

Noise (Ripple + spikes) ≤ 100 mV

rms

Load sharing 10%

I/P and O/P connector Rear side

Over voltage shutdown

Output protection

Note: As a result of continuous product improvement, all specif ications are subject to change without prior notice. All performance parameters are valid at Nominal input (230Vac) and nominal output

(48Vdc) conditions unless otherwise specified.

Blocking diode
Short circuit proof
Over temperature protection

Applicable Standards

Electrical safety IEC 60950-1
UL 60950-1
CSA 22.2
EMI As per CISPR-22
EMC IEC 61000-4-5, (Surge immunity limits)
IEC 61000-4-6, (RF Conducted susceptibility immunity limits)
IEC 61000-4-3, (Radiated Electromagnetic Field immunity limits)
IEC 61000-4-4, (EFT/ Burst immunity limits)
IEC 61000-4-2, (ESD Immunity limits)
Harmonics EN 61000-3-2
Environment RoHS compliant

Ordering Information

Product Description Comcode
EP0300AC48TEZ 48V, 300W rectifier 150022411

Country of Sale

South Asia India
SE Asia ­NA ­CALA ­European -

Other Parameters

Isolation

Visual Indications

Operating temp -25°C to +75°C
Power De-rating

Operating Humidity 5% to 95% RH non-condensing

MTBF

Audible Noise

Mechanical

Width 50.4 mm (2”)

Height 45 mm (1.75”)

Depth 228.6mm (9”)

Weight 0.5 kg (1.1 lbs)

3.0 kVac – I/P & O/P

1.5 kVac – input & earth

0.5 kVac – output & earth
Normal LED (Green):
3 status (Blink, OFF, ON)
Fault LED (Red):
3 status (Blink, OFF, ON)

+60°C to +75°C

> 150k hours Telcordia SR-332,
Method 1, Case 3 (Ambient
Temperature.: 25°C)
< 60dBA at an ambient noise level of
45dBA, and at ambient temperature
of 25°C

GE Critical Power reserves the right to make changes to the product (s) or information contained herein without notice. No liability is assumed as a result of their use or
application. No rights under any patent accompany the sale of any such product(s) or information.

© 2013 GE Critical Power (Bangalore, India) All Rights Reserved.

Document Rev No: R0.1 Date: 5

PDF name: EP0300AC48TEZ PDS.pdf

th

February 2013