This chapter introduces you to the basic features of your
Gateway computer. Read this chapter to learn:
■ How to identify the features of your computer
■ How to locate your computer’s model and serial
number
■ How to locate the Microsoft Certificate of
Authenticity
■ How to locate the specifications for your computer
■ What accessories are available for your computer
1
1
Chapter 1: Checking Out Your Gateway Computer
Front
Your computer may contain any of the following components.
DVD/CD drive
(optional)
Reset button
Hard drive
indicator
CD/DVD eject
button
3.5-inch drive bay
covers
Power indicator
Power bu tton
Headphone jack
Microphone jack
2
Port door
USB ports
www.gateway.com
ComponentIconDescription
Front
DVD/CD drive
(optional)
Reset buttonPress this button to restart your computer if your computer
Hard drive indicatorTurns on when the hard is accessed.
Headphone jackPlug powered, analog front speakers, an external amplifier,
Microphone jackPlug a microphone into this jack. This jack is color-coded red
CD/DVD eject buttonPress this button to open the CD or DVD drive tray. For more
3.5-inch drive bay
covers
Power indicatorIndicator turns on when computer power is on.
Power buttonPress this button to turn the power on or off. You can also
Use this drive to listen to audio CDs, install games and
programs, watch DVDs, and store large files onto recordable
CDs (depending on drive type). For more information, see
“Using the CD or DVD drive” on page 74.
This drive may be a CD, CD-RW, DVD, or DVD/CD-RW drive.
To identify your drive type and for more information about your
drive, see “Identifying drive types” on page 74.
does not respond to mouse or keyboard input.
or headphones into this jack. This jack is color-coded lime
green.
or pink.
information, see “Using the CD or DVD drive” on page 74.
Remove these covers to install additional 3.5-inch drives.
configure the power button to operate in Standby/Resume
mode or Hibernate mode. For more information on changing
the power button setting, see “Changing the power scheme”
on page 116.
USB ports Plug USB (Universal Serial Bus) devices (such as a USB
Iomega™ Zip™ drive, printer, scanner, camera, keyboard, or
mouse) into these ports. For more information, see “Installing
a printer, scanner, or other peripheral device” on page 23.
www.gateway.com
3
Chapter 1: Checking Out Your Gateway Computer
Back
Your computer may contain any of the following components.
Power connector
Voltage switch
Case cover
thumbscrew
PS/2 keyboard port
USB ports
Serial port
Monitor port
USB ports
Microphone jack
Headphone/analog
speakers
(Line out 1) jack
Modem jack
GATEWAY
SERIAL NO.
Gateway serial
number
PS/2 mouse port
Parallel port
System label
Ethernet
(network) jack
Audio input
(Line in) jack
Case cover
screw
Microsoft Certificate
of Authenticity
(located on the side
removable cover)
Telephone jack
4
www.gateway.com
ComponentIconDescription
Power connectorPlug the power cable into this connector.
Voltage switchBefore turning on your computer, make sure that this switch is
in the correct position for the correct power available. The
switch is preset at the factory with the correct voltage for your
area.
In the United States, the utility power is supplied at a nominal
115 volts at 60 Hz. The power supply should always be set to
this when your computer is operating in the United States. In
other areas of the world, such as Europe, the utility power is
supplied at 230 volts at 50 Hz. If your computer is operating
in an environment such as this, the voltage switch should be
moved to 230.
PS/2 keyboard portPlug a PS/2 keyboard into this port.
USB ports Plug USB (Universal Serial Bus) devices (such as a USB
Iomega™ Zip™ drive, printer, scanner, camera, keyboard, or
mouse) into these por ts. For more information, see “Installing
a printer, scanner, or other peripheral device” on page 23.
Serial portPlug a serial device (such as a digital camera) into this port.
For more information, see “Installing a printer, scanner, or other
peripheral device” on page 23.
Back
Monitor portPlug a monitor into this port.
Microphone jackPlug a microphone into this jack. This jack is color-coded red
or pink.
Headphone/analog
speakers
(Line out 1) jack
Modem jackPlug a modem cable into this jack.
Case cover
thumbscrew
Gateway serial
number
PS/2 mouse portPlug a Personal System/2
Plug powered, analog front speakers, an external amplifier, or
headphones into this jack. This jack is color-coded lime green.
Remove this screw before opening the case.
Provides your computer’s serial number. For more information,
see “Gateway serial number” on page 7.
®
(PS/2) mouse into this port.
www.gateway.com
5
Chapter 1: Checking Out Your Gateway Computer
ComponentIconDescription
Parallel portPlug a parallel device (such as a printer) into this port. For more
information, see “Installing a printer, scanner, or other
peripheral device” on page 23.
System labelIncludes your computer’s model number. For more information,
see “Identifying your model” on page 7.
Ethernet (network)
jack
Audio input
(Line in) jack
Microsoft
Certificate of
Authenticity
Telephone jack
(optional)
Plug a 10/100 Ethernet network cable or a device (such as a
DSL or cable modem for a broadband Internet connection) into
this jack. For more information, see “Learning about the
Internet” on page 58.
Plug an external audio input source (such as a stereo) into this
jack so you can record sound on your computer. This jack is
color-coded blue.
Contains your Windows product key. For more information, see
“Microsoft Certificate of Authenticity” on page 7.
If your modem has a telephone jack, plug the cable for a
telephone into this jack.
6
www.gateway.com
Identifying your model
ImportantThe labels shown in this section are for informational
purposes only. Label information varies by model, features
ordered, and location.
Gateway model number
The label on the back of your computer case contains information that
identifies your computer model. Gateway Technical Support will need this
information if you call for assistance.
Gateway serial number
You can locate the Gateway serial number:
■ Printed on a white sticker on the front or back of your computer case.
Identifying your model
■ Printed on the customer invoice that came with your computer. The
invoice also contains your customer ID number.
■ Displayed in HelpSpot. Click Start, Help and Support, then click View product
serial number
.
Microsoft Certificate of Authenticity
The Microsoft Certificate of Authenticity label found on the back or side of your
computer case includes the product key code for your operating system.
www.gateway.com
7
Chapter 1: Checking Out Your Gateway Computer
Finding your specifications
For more information about your computer, such as memory size, memory type,
and hard drive size, go to the
eSupport page at support.gateway.com
additional Gateway documentation and detailed specifications.
Click
Start, Help and Support, then click View system serial number to view your
computer’s serial number. Click
See your PC’s configuration to check your computer’s specifications.
My Computer Info link in HelpSpot or visit Gateway’s
. The eSupport page also has links to
Start, Help and Support, then click
8
www.gateway.com
Finding your specifications
You can also find out more about your computer at the Gateway eSupport site.
Visit support.gateway.com
page 32.
. For more information, see “Using eSupport” on
www.gateway.com
9
Chapter 1: Checking Out Your Gateway Computer
Accessories
Gateway offers accessories that can help you make the most of using your
computer. To order accessories, visit the Accessory Superstore at
accessories.gateway.com
Home networking kit
With a home networking kit, you can network, or “link”, two or more
computers in your home. After you have set up a home network, you can access
the files, drives, and printers on linked computers, play multiplayer games, and
even share one Internet connection.
Two types of home networking kits are available. Wireless home networking
kits use radio frequency to link your computers wirelessly. Ethernet home
networking kits use network cabling to link your computers.
Imaging equipment
A digital camera lets you take pictures that you can view and edit on your
computer.
A digital video camera lets you take movies that you can view and edit on your
computer.
.
A scanner copies an image, such as a graphic or document, then stores the copy
in a file.
You can attach your digital photographs or scanned images to e-mail messages
or post them on a Web site.
Printers
You can attach many types of printers to your computer. The most common
types are inkjet and laser printers, which print in color or black and white. For
more information about attaching a printer to your computer, see “Installing
a printer, scanner, or other peripheral device” on page 23.
Inkjet printers and cartridges are relatively inexpensive, but usually they are
slower than laser printers. Using an inkjet color printer, you can print pictures,
banners, and greeting cards, as well as documents.
Laser printers and cartridges are more expensive, but usually they print much
faster than inkjet printers. Laser printers are better than inkjet printers when
you are printing large documents.
10
www.gateway.com
Accessories
Storage Devices
If you need additional storage space or you want to back up your files, you
can add storage devices to you computer.
With a recordable CD drive, you can free up hard drive space by backing up
file s, then rem oving them fr o m your hard dr i v e . Wr ita ble CDs can hold as mu c h
as 700 MB of data. For more information about using recordable drives, see
“Using a recordable drive” on page 87.
If you need to back up your entire system, you probably need a tape backup
(TBU) drive. TBU drives, like tape recorders, use magnetic tape cartridges to store
data. Tape drive cartridges can store 2 GB, 20 GB, 40 GB, 130 GB, or more of
data.
If you want to increase your internal storage space, try replacing your existing
hard drive with a larger drive. For more information about installing a larger
drive, see “Replacing the hard drive” on page 171.
Memory
Large programs, such as multimedia games or graphics programs, use a lot of
memory. If your programs are running more slowly than you think they should,
try adding more memory.
Uninterruptible power supplies
A standby, uninterruptible power supply (UPS) protects your computer from
data loss during a total power failure. A UPS uses a battery to keep your
computer running temporarily during a power failure so you can save your work
and shut down your computer correctly. A UPS may also provide protection
from power surges. For information about setting up a UPS, see “Setting up an
uninterruptible power supply” on page 120.
www.gateway.com
11
Chapter 1: Checking Out Your Gateway Computer
12
www.gateway.com
Getting Started
Read this chapter to find out how to:
■ Use your computer safely
■ Protect your computer from power source problems
■ Start and turn off your computer
■ Use the keyboard
■ Use the mouse
■ Use the computer display
■ Install peripheral devices
2
13
Chapter 2: Getting Started
Working safely
Before using your computer, read the following recommendations for setting
up a safe and comfortable work area and avoiding discomfort and strain.
Hands and
arms are
parallel to the
floor
Top of display is not
higher than eye level
Screen is
perpendicular to
your line of sight
Feet are flat on the floor
Reducing eye strain
Sunlight or bright indoor lighting should not reflect on the computer display
or shine directly into your eyes.
■ Position the computer desk and computer so you can avoid glare on your
computer display and light shining directly into your eyes. Reduce glare
by installing shades or curtains on windows, and by installing a glare screen
filter on your computer display.
■ Use soft, indirect lighting in your work area. Do not use your computer
in a dark room.
■ Avoid focusing your eyes on your computer display for long periods of
time. Look away from your display occasionally, and try to focus on distant
objects.
14
www.gateway.com
Setting up your computer desk and chair
When you are setting up your computer desk and chair, make sure that the
desk is the appropriate height and the chair helps you maintain good posture.
■ Select a flat surface for your computer desk.
■ Adjust the height of the computer desk so your hands and arms are
positioned parallel to the floor when you use the keyboard and mouse. If
the desk is not adjustable or is too tall, consider using a keyboard drawer.
■ Use an adjustable chair that is comfortable, distributes your weight evenly,
and keeps your body relaxed.
■ Position your chair so the keyboard is at or slightly below the level of your
elbow. This position lets your shoulders relax while you type.
■ Adjust the chair height, adjust the forward tilt of the seat, or use a footrest
to distribute your weight evenly on the chair and relieve pressure on the
back of your thighs.
■ Adjust the back of the chair so it supports the lower curve of your spine.
You can use a pillow or cushion to provide extra back support.
Working safely
Setting up your computer and computer
accessories
■ Set up your computer so the display is no higher than eye level, the display
controls are within reach, and the display is tilted to be perpendicular to
your line of sight.
■ Place your keyboard and mouse at a comfortable distance. You should be
able to reach them without stretching.
■ Set paper holders at the same height and distance as the computer display.
www.gateway.com
15
Chapter 2: Getting Started
Sitting at your computer
■ Avoid bending, arching, or angling your wrists. Make sure that they are
in a relaxed position when you type.
■ Do not slouch forward or lean far back. Sit with your back straight so your
knees, hips, and elbows form right angles when you work.
■ Take breaks to stand and stretch your legs.
■ Avoid twisting your torso or neck.
Avoiding discomfort and injury from repetitive
strain
■ Vary your activities to avoid excessive repetition.
■ Take breaks to change your position, stretch your muscles, and relieve your
eyes.
■ Find ways to break up the work day, and schedule a variety of tasks.
16
www.gateway.com
Protecting from power source problems
Protecting from power source
problems
During a power surge, the voltage level of electricity coming into your computer
can increase to far above normal levels and cause data loss or system damage.
Protect your computer and peripheral devices by connecting them to a surge protector, which absorbs voltage surges and prevents them from reaching your
computer.
WarningHigh voltages can enter your computer through both the
power cord and the modem connection. Protect your
computer by using a surge protector. If you have a
telephone modem, use a surge protector that has a
modem jack. If you have a cable modem, use a surge
protector that has an antenna/cable TV jack. During an
electrical storm, unplug both the surge protector and the
modem.
An uninterruptible power supply (UPS) supplies battery power to your computer
during a power failure. Although you cannot run your computer for an
extended period of time with a UPS, a UPS lets you run your computer long
enough to save your work and shut down your computer normally. For more
information, see “Setting up an uninterruptible power supply” on page 120.
www.gateway.com
17
Chapter 2: Getting Started
Starting your computer
To start your computer:
1 Connect the cables to your computer using the setup poster.
2 Turn on your computer.
3 If you are starting your computer for the first time, follow the on-screen
instructions to set up your computer.
4 Turn on any peripheral devices, such as printers or scanners, and see the
documentation that came with the device for setup instructions.
Turning off your computer
Tips & TricksWhen you turn off your computer, certain components in
the power supply and system board remain energized. In
order to remove all electrical power from your computer,
unplug the power cord and modem cable from the wall
outlets. We recommend disconnecting the power cord and
modem cable when your computer will not be used for long
periods.
To turn off your computer:
1 Click Start, then click Turn Off Computer. The Turn Off Computer dialog box
opens.
2 Click Tu r n O f f . Windows shuts down and turns off your computer.
ImportantIf for some reason you cannot use the Turn Off Computer
18
option in Windows to turn off your computer, press and
hold the power button for about five seconds, then
release it.
www.gateway.com
Restarting (rebooting) your computer
Restarting (rebooting) your
computer
If your computer does not respond to keyboard or mouse input, you may have
to close programs that are not responding. If closing unresponsive programs
does not restore your computer to normal operation, you may have to restart
(reboot) your computer.
To close unresponsive programs and restart your computer:
1 Press CTRL+ALT+DEL, then click Task Manager. The Task Manager window
opens.
2 Click the Applications tab, then click the program that is not responding.
3 Click End Task.
4 If your computer does not respond, turn it off, wait ten seconds and turn
it on again.
ImportantIf your computer does not turn off, press and hold the
power button for about five seconds, then release it.
www.gateway.com
19
Chapter 2: Getting Started
Keyboard
Function keysNavigation keys Indicators
Press these
Windows keysApplication
key
To...
Directional
keys
Numeric
keypad
keys...
Function keysStart program actions. Each program uses different function keys for
different purposes. See the program documentation to find out more
about the function key actions.
Navigation keysPress these keys to move the cursor to the beginning of a line, to the
end of a line, up the page, down the page, to the beginning of a
document, or to the end of a document.
IndicatorsShow if your
activated. Press the corresponding key to activate the function.
Windows keysPress one of these keys to open the Windows Start menu. These keys
can also be used in combination with other keys to open utilities like
NUM LOCK, CAPS LOCK, or SCROLL LOCK keys are
F (Search utility), R (Run utility), and E (Explorer utility).
Application keyAccess shortcut menus and help assistants in Windows.
Directional keysMove the cursor up, down, right, or left.
Numeric keypadUse these keys to type numbers when the numeric keypad (
is turned on.
NUM LOCK)
20
www.gateway.com
Mouse
The mouse is a device that controls the pointer movement on the computer
display. This illustration shows the standard mouse.
Right button
Mouse
Left button
As you move the mouse, the pointer (arrow) on the display moves in the same
direction.
You can use the left and right buttons on the mouse to select objects on the
display.
You can use the scroll wheel on the mouse to move through a document. This
feature is not available in all programs.
Scroll wheel
www.gateway.com
21
Chapter 2: Getting Started
Using the mouse
To...Do this...
Move the pointer
on the computer
display
Select an object on
the computer
display
Start a program or
open a file or folder
Access a shortcut
menu or find more
information about
an object on the
computer display.
Move an object on
the computer
display.
click
click
click
click
click,
click,
click
click
and drag
and drag
click
Move the mouse around on the mouse
pad. If you run out of space on your
mouse pad and need to move the pointer
farther, pick up the mouse, set it down in
the middle of the mouse pad, then
continue moving the mouse.
Position the pointer over the object.
Quickly press and release the left mouse
button once. This action is called
clicking
.
Position the pointer over the object.
Quickly press and release the left mouse
button twice. This action is called
double-clicking
Position the pointer over the object.
Quickly press and release the right
mouse button once. This action is called
right-clicking
Position the pointer over the object.
Press the left mouse button and hold it
down. Move (drag) the object to the
appropriate part of the computer display.
Release the button to drop the object
where you want it.
.
.
For instructions on how to adjust the double-click speed, pointer speed,
right-hand or left-hand configuration, and other mouse settings, see “Changing
the mouse settings” on page 112.
For instructions on how to clean the mouse, see “Cleaning the mouse” on
page 147.
22
www.gateway.com
Loading...
+ 214 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.