Garmin GPSMAP 421, GPSMAP 421/421s, GPSMAP 421s, GPSMAP 431, GPSMAP 431/431s Template Manual

...
Printing a Mounting Template
NOTICE
These instructions for printing a mounting template must be followed precisely. Failure to do so may result in incorrect dimensions on the template and an incorrect cutout (too large or too small) on the mounting surface of your boat.
To print the attached mounting template, check the dimensions of the template and select the appropriate size of paper. Both the length and width measurements are indicated on the template.
The paper size must be larger than the dimensions of the template. Select the paper size using the Properties button in the Adobe Acrobat print dialog box.
IMPORTANT: When printing the ush mount template, set Page Scaling in the Adobe Acrobat print dialog box to None.
Properties: Select the paper size.
Page Scaling:
Select None:
Auto-Rotate and Center:
Select with a check mark
for correct orientation
NOTICE
Paper size (example): Use appropriate size paper.
After printing and before cutting the mounting surface, measure the printed template to ensure both the length and the width printed at the correct size and to ensure that the dimensions of the printed template match the actual size of your mount. Garmin is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.
5 1/2"
(140 mm)
400 SerieS FluSh Mount teMplate
6 1/4"
(158 mm)
3/8"
(10 mm)
1/2"
13 mm
Recommended clearance for SD card door
Débattement recommandé pour le cache de la carte SD
Spazio libero consigliato per lo sportello della scheda SD
Empfohlener Abstand für SD-Speicherkartenabdeckung
Se recomienda despejar la puerta de la tarjeta SD Distância recomendada para a porta do cartão SD
Anbefalet fri plads til SD-kortlåg
Aanbevolen ruimte voor klepje SD-kaart
Suositeltava vapaa tila SD-korttipaikan luukkua varten
Anbefalt klaring for SD-kortdekselet
Rekommenderat utrymme för SD-kortlucka
Рекомендованное свободное пространство для открытия
крышки отсека карты памяти SD
Preporučeni razmak za vrata SD kartice
Συνιστώμενο διάκενο για την θύρα της κάρτας SD
October 2007 190-00757-03 Rev. A Printed in Taiwan
Loading...