Specifications — MediaLink Switchers (MLS)
Video
Gain ............................................... |
Unity |
Bandwidth |
|
MLS 306 ............................. |
280 MHz (-3dB), fully loaded |
All other models .............. |
350 MHz (-3dB), fully loaded |
Frequency response ..................... |
< ± 0.1dB @ 30 MHz |
Differential phase error .............. |
1.5º, 0 to 10 MHz |
Differential gain error ................. |
1.5%, 0 to 10 MHz |
Crosstalk ....................................... |
-50dB @ 5 MHz |
Video input
Number/signal type |
|
|
|
MLS |
306 ............................. |
3 RGBHV, RGBS, RGsB, or RsGsBs |
|
|
|
3 S-video, composite video |
|
MLS |
506 Series ................. |
3 RGBHV, RGBS, RGsB, or RsGsBs |
|
|
|
3 component video, S-video, or composite video |
|
Connectors |
|
|
|
MLS |
306 ............................. |
3 female 15-pin HD (RGB computer video) |
|
|
|
3 female 4-pin mini-DIN (S-video) |
|
|
|
3 female BNC (composite video) |
|
MLS |
506 Series ................. |
Female BNCs |
|
Minimum/maximum levels ...... |
Analog ....... |
0.0V to 2.0V p-p with no offset |
|
Impedance |
.................................... |
75 ohms |
|
Horizontal frequency .................. |
15 kHz to 150 kHz |
||
Vertical frequency ....................... |
30 Hz to 150 Hz |
||
Return loss .................................... |
|
-45dB @ 5 MHz |
|
Maximum DC ....................offset |
1.5V |
|
Video output
Number/signal type |
|
|
MLS 306 ............................. |
2 RGBHV, RGBS, RGsB, or RsGsBs |
|
|
1 S-video |
|
|
1 composite video |
|
MLS 506 Series ................. |
1 RGBHV, RGBS, RGsB, or RsGsBs |
|
|
1 component video |
|
|
1 S-video |
|
|
1 composite video |
|
Connectors |
|
|
MLS 306 ............................. |
1 female 15-pin HD (RGB computer video output 1) |
|
|
5 female BNC (RGB output 2) |
|
|
2 female BNC (S-video) |
|
|
1 female BNC (composite video) |
|
MLS 506 Series ................. |
Female BNCs |
|
Minimum/maximum levels ...... |
Analog ....... |
0.0V to 2.0V p-p with no offset |
Impedance .................................... |
75 ohms |
|
Return loss .................................... |
-45dB @ 5 MHz |
|
DC offset ....................................... |
± 5mV maximum |
|
Switching type ............................. |
Triple-Action for RGB |
Sync
Input/output type ....................... |
RGBHV, RGBS, RGsB, RsGsBs |
|
Standards ...................................... |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
Input level ..................................... |
2V to 5V p-p |
|
Output level.................................. |
TTL ............. |
5.0V p-p |
1-2 MLS 306, MLS 506, MLS 506MA, MLS 506SA • Specifications
Input impedance .......................... |
>1 kohms |
Output impedance ...................... |
75 ohms |
Max input voltage ....................... |
5V p-p |
Max propagation delay… ........... |
30 ns |
Polarity .......................................... |
Positive or negative (follows input) |
Audio
Frequency response |
|
MLS 306, MLS 506 ........... |
20 Hz to 20 kHz, +0dB/-3dB |
MLS 506MA ...................... |
50 Hz to 15 kHz, +0dB/-1dB; 20 Hz to 20 kHz, +0dB/-3dB |
MLS 506SA ....................... |
20 Hz to 20 kHz, +0dB/-1dB at 30 W into 8 ohms |
THD + Noise |
|
MLS 306, MLS 506 ........... |
<0.2% @ 50 Hz to 22 kHz at rated maximum output drive |
MLS 506MA ...................... |
<0.8% @ 50 Hz to 22 kHz at rated maximum output drive |
MLS 506SA ....................... |
<0.5% @ 1 kHz at 30 W into 8 ohms |
S/N ................................................ |
>90dB at 22 Hz to 22 kHz |
Crosstalk ....................................... |
<-65dB @ 20 Hz to 20 kHz, <-80dB @ 1kHz and below 60 Hz, fully loaded |
Stereo channel separation |
|
MLS 506SA ....................... |
>80dB @ 1 kHz |
All other models .............. |
>90dB @ 1 kHz |
CMRR ............................................ |
>90dB @ 20 Hz to 200 Hz, >60dB @ 20 Hz to 20 kHz |
Audio input
Number/signal type |
|
|
|
MLS 306, MLS 506 ........... |
6 stereo, balanced/unbalanced |
||
MLS 506MA/SA .............. |
7 stereo, balanced/unbalanced |
||
Connectors |
|
|
|
MLS 306 ............................. |
Inputs 1 to 3 .............. |
3.5 mm captive screw connectors, 5-pole |
|
|
Inputs 4 to 6 .............. |
3.5 mm captive screw connectors, 5-pole or |
|
|
|
female 3.5 mm mini stereo jacks (unbalanced) |
|
MLS 506 ............................. |
6 3.5 mm captive screw connectors, 5-pole |
||
MLS 506MA/SA .............. |
7 3.5 mm captive screw connectors, 5-pole |
||
Impedance .................................... |
>18 kohms unbalanced/balanced |
||
Maximum level ............................ |
+21dBu (balanced or unbalanced) at stated % THD + N |
||
Input gain adjustment ................. |
MLS 306, MLS 506 .................. |
|
-15dB to +9dB, adjustable per input |
Input level adjustment ................ |
MLS 506MA, MLS 506SA ...... |
-78dB to +24dB (in 1 to 100 steps), adjustable per |
|
|
|
|
input |
Audio — effects return (MLS 506MA & MLS 506SA)
Number/signal type ................... |
1 stereo, unbalanced |
Connectors .................................... |
1 3.5 mm captive screw connector, 3-pole |
Impedance .................................... |
>10 kohms unbalanced |
Level .............................................. |
+4dBu, unbalanced |
Audio — effects send (MLS 506MA & MLS 506SA)
Number/signal type ................... |
1 stereo, unbalanced |
Connectors .................................... |
1 3.5 mm captive screw connector, 3-pole |
Impedance .................................... |
50 ohms, unbalanced |
Level .............................................. |
+4dBu, unbalanced |
MLS 306, MLS 506, MLS 506MA, MLS 506SA • Specifications 1-3